Verbys guide

Object

The step-by-step guide to every command in the Object menu of Verbys.

Wrap Text

Where to find it
  • Object › Arrange
  • Pane › Picture
  • Shortcut menu

Chooses how the text flows around the object: in line with the text like a word, square, tight to its outline, through its hollows, top and bottom, behind the text or in front of it. The menu ticks the layout in force.

  1. Select the object.
  2. Click Wrap Text: the menu opens.
  3. Choose a layout: the icon next to each entry shows how the text will treat the object.
  4. For an object that is free on the page, choose “Move with Text” to have it follow its paragraph, or “Fix Position on Page” to keep it where it is.

Tip “In Line with Text” puts the object back in the line, and any other layout takes it out: either way a single Undo goes back.

Wrap Text

Where to find it
  • Object › Arrange
  • Pane › Picture
  • Shortcut menu

Chooses how the text flows around the object: in line with the text like a word, square, tight to its outline, through its hollows, top and bottom, behind the text or in front of it. The menu ticks the layout in force.

  1. Select the object.
  2. Click Wrap Text: the menu opens.
  3. Choose a layout: the icon next to each entry shows how the text will treat the object.
  4. For an object that is free on the page, choose “Move with Text” to have it follow its paragraph, or “Fix Position on Page” to keep it where it is.

Tip “In Line with Text” puts the object back in the line, and any other layout takes it out: either way a single Undo goes back.

Wrap Text

Where to find it
  • Object › Arrange
  • Pane › Picture
  • Shortcut menu

Chooses how the text flows around the object: in line with the text like a word, square, tight to its outline, through its hollows, top and bottom, behind the text or in front of it. The menu ticks the layout in force.

  1. Select the object.
  2. Click Wrap Text: the menu opens.
  3. Choose a layout: the icon next to each entry shows how the text will treat the object.
  4. For an object that is free on the page, choose “Move with Text” to have it follow its paragraph, or “Fix Position on Page” to keep it where it is.

Tip “In Line with Text” puts the object back in the line, and any other layout takes it out: either way a single Undo goes back.

More Layout Options

Sets exactly where the object sits on the page and how the text flows around it, while a small page beside the controls shows where the object will go and how the lines will wrap. It is the window behind “More Layout Options…” at the end of the Position gallery and of the Wrap Text menu.

  1. Select the object.
  2. Open Position or Wrap Text and choose “More Layout Options…” at the bottom: the window opens on the position or on the text wrapping.
  3. Under Position, choose for each direction how the object is placed — aligned, book layout, at an absolute distance or as a percentage — and what it is measured from: the margin, the page, the column, the paragraph, the line…
  4. Under Text Wrapping, choose a wrapping style, the sides the text may flow on and its distance from the object.
  5. Check the preview: the faint rectangle is where the object is now, the solid one where it will go, the dashed frame what it is measured from. Click Apply.

Tip “Move object with text” keeps the object where it is on the page and makes it follow its paragraph; clearing it keeps the object fixed on the page. Either way it does not jump, and a single Undo takes back everything the window changed.

Wrap Text

Where to find it
  • Object › Arrange
  • Pane › Picture
  • Shortcut menu

Chooses how the text flows around the object: in line with the text like a word, square, tight to its outline, through its hollows, top and bottom, behind the text or in front of it. The menu ticks the layout in force.

  1. Select the object.
  2. Click Wrap Text: the menu opens.
  3. Choose a layout: the icon next to each entry shows how the text will treat the object.
  4. For an object that is free on the page, choose “Move with Text” to have it follow its paragraph, or “Fix Position on Page” to keep it where it is.

Tip “In Line with Text” puts the object back in the line, and any other layout takes it out: either way a single Undo goes back.

Wrap Text

Where to find it
  • Object › Arrange
  • Pane › Picture
  • Shortcut menu

Chooses how the text flows around the object: in line with the text like a word, square, tight to its outline, through its hollows, top and bottom, behind the text or in front of it. The menu ticks the layout in force.

  1. Select the object.
  2. Click Wrap Text: the menu opens.
  3. Choose a layout: the icon next to each entry shows how the text will treat the object.
  4. For an object that is free on the page, choose “Move with Text” to have it follow its paragraph, or “Fix Position on Page” to keep it where it is.

Tip “In Line with Text” puts the object back in the line, and any other layout takes it out: either way a single Undo goes back.

Wrap Text

Where to find it
  • Object › Arrange
  • Pane › Picture
  • Shortcut menu

Chooses how the text flows around the object: in line with the text like a word, square, tight to its outline, through its hollows, top and bottom, behind the text or in front of it. The menu ticks the layout in force.

  1. Select the object.
  2. Click Wrap Text: the menu opens.
  3. Choose a layout: the icon next to each entry shows how the text will treat the object.
  4. For an object that is free on the page, choose “Move with Text” to have it follow its paragraph, or “Fix Position on Page” to keep it where it is.

Tip “In Line with Text” puts the object back in the line, and any other layout takes it out: either way a single Undo goes back.

Position

Where to find it
  • Object › Arrange
  • Pane › Picture

Places the object at one of nine spots on the page — a corner, the middle of an edge or the centre — or puts it back in line with the text. Each choice in the gallery is a small page that shows where the object will go and how the text will flow around it.

  1. Select the object, whether it is in line or already free on the page.
  2. Click Position: the gallery opens.
  3. Choose one of the nine pages under “With Text Wrapping”: the object lines up with the margins at that spot, with square text wrapping around it and its position fixed on the page.
  4. Choose “In Line with Text” to put it back in the line, like a word.

Tip The highlighted page is the current position; when none is, the gallery says “Custom Position”. A single Undo puts the object back where it was.

Position

Where to find it
  • Object › Arrange
  • Pane › Picture

Places the object at one of nine spots on the page — a corner, the middle of an edge or the centre — or puts it back in line with the text. Each choice in the gallery is a small page that shows where the object will go and how the text will flow around it.

  1. Select the object, whether it is in line or already free on the page.
  2. Click Position: the gallery opens.
  3. Choose one of the nine pages under “With Text Wrapping”: the object lines up with the margins at that spot, with square text wrapping around it and its position fixed on the page.
  4. Choose “In Line with Text” to put it back in the line, like a word.

Tip The highlighted page is the current position; when none is, the gallery says “Custom Position”. A single Undo puts the object back where it was.

Position

Where to find it
  • Object › Arrange
  • Pane › Picture

Places the object at one of nine spots on the page — a corner, the middle of an edge or the centre — or puts it back in line with the text. Each choice in the gallery is a small page that shows where the object will go and how the text will flow around it.

  1. Select the object, whether it is in line or already free on the page.
  2. Click Position: the gallery opens.
  3. Choose one of the nine pages under “With Text Wrapping”: the object lines up with the margins at that spot, with square text wrapping around it and its position fixed on the page.
  4. Choose “In Line with Text” to put it back in the line, like a word.

Tip The highlighted page is the current position; when none is, the gallery says “Custom Position”. A single Undo puts the object back where it was.

Position

Where to find it
  • Object › Arrange
  • Pane › Picture

Places the object at one of nine spots on the page — a corner, the middle of an edge or the centre — or puts it back in line with the text. Each choice in the gallery is a small page that shows where the object will go and how the text will flow around it.

  1. Select the object, whether it is in line or already free on the page.
  2. Click Position: the gallery opens.
  3. Choose one of the nine pages under “With Text Wrapping”: the object lines up with the margins at that spot, with square text wrapping around it and its position fixed on the page.
  4. Choose “In Line with Text” to put it back in the line, like a word.

Tip The highlighted page is the current position; when none is, the gallery says “Custom Position”. A single Undo puts the object back where it was.

Position

Where to find it
  • Object › Arrange
  • Pane › Picture

Places the object at one of nine spots on the page — a corner, the middle of an edge or the centre — or puts it back in line with the text. Each choice in the gallery is a small page that shows where the object will go and how the text will flow around it.

  1. Select the object, whether it is in line or already free on the page.
  2. Click Position: the gallery opens.
  3. Choose one of the nine pages under “With Text Wrapping”: the object lines up with the margins at that spot, with square text wrapping around it and its position fixed on the page.
  4. Choose “In Line with Text” to put it back in the line, like a word.

Tip The highlighted page is the current position; when none is, the gallery says “Custom Position”. A single Undo puts the object back where it was.

Bring forward

Where to find it
  • Object › Arrange › Order, Align, Rotate
  • Pane › Chart
  • Shortcut menu

Moves the selected object one step up the stack, in front of whatever is covering it. Use it when overlapping pictures or shapes hide each other.

  1. Click the object that is being covered.
  2. Click Bring Fwd.
  3. Choose Bring Forward to move it up one place, or Bring to Front to put it in front of everything.
  4. Repeat until the object sits where you want in the pile.

Tip If the object you need is buried deep, it is often fewer clicks to send the one on top backwards instead.

Bring Forward

Where to find it
  • Object › Arrange › Order, Align, Rotate
  • Pane › Chart
  • Shortcut menu

Moves the chart one step up the stack of floating objects, so it covers what it used to sit behind.

  1. Click a floating chart.
  2. Click Bring Forward.
  3. Repeat until the chart is in front of the object you want it to cover.

Tip The command is greyed out on a chart that sits in the flow of the text: an inline chart is a character on a line, and characters have no stack to move up.

Send backward

Where to find it
  • Object › Arrange › Order, Align, Rotate
  • Pane › Chart
  • Shortcut menu

Moves the selected object one step down the stack, behind the one beneath it. It is the counterpart to Bring Fwd.

  1. Click the object you want to move back.
  2. Click Send Back.
  3. Choose Send Backward to move it down one place, or Send to Back to put it behind everything.
  4. Repeat until the objects overlap the way you want.

Tip Send a large background picture right to the back so it can never cover the objects sitting on it.

Send Backward

Where to find it
  • Object › Arrange › Order, Align, Rotate
  • Pane › Chart
  • Shortcut menu

Moves the chart one step down the stack of floating objects, so what was behind it comes in front.

  1. Click a floating chart.
  2. Click Send Backward.
  3. Repeat until the chart is behind the object that should cover it.

Tip If the chart disappears behind something opaque, use the Selection Pane to get it back: an object you cannot click is still listed there.

Align

Where to find it
  • Object › Arrange › Order, Align, Rotate

Lines the selected objects up with one another along an edge or through their centres. Far more accurate than nudging each one into place.

  1. Select the objects you want to line up.
  2. Click Align.
  3. In the window, choose which edge or centre they line up on; in the menu, quick ways such as Align Left follow the Align item.
  4. Check the result, and repeat for the other direction if the objects need lining up both ways.

Tip Align needs more than one object selected — with a single object there is nothing to line it up against.

Rotate

Where to find it
  • Object › Arrange › Order, Align, Rotate

Turns the selected object round, or flips it to its mirror image. Handy for tilting a picture or facing an arrow the other way.

  1. Click the object you want to turn.
  2. Click Rotate.
  3. In the window, choose how far to turn it; in the menu, the quick ways to turn it by 90° or flip it follow the Rotate item.
  4. Check the object still sits inside the margins once it has turned.

Tip Flipping mirrors the object, so any text or numbers drawn on it will read backwards.

Group

Where to find it
  • Object › Arrange
  • Shortcut menu

Binds the selected objects together so they move, resize and stack as one. Group a finished diagram to stop its parts drifting apart.

  1. Select all the objects that belong together.
  2. Click Group.
  3. Move the group a little to check every part comes with it.
  4. When you need to take the objects apart again, choose Ungroup among the items that follow Group in the menu.

Tip Group last: align and position the parts first, because they are easier to adjust while they are still separate.

Selection pane

Where to find it
  • Object › Arrange
  • Pane › Chart

Opens a side pane listing every object on the document — pictures, shapes, charts. Click a row to select that object, use the eye to hide it, or rename it so one object can be told from another. It is the only way to reach an object that is buried under another one or already hidden.

  1. Click Selection.
  2. Click a row in the pane to select that object on the page.
  3. Double-click a row, or click Rename at the foot of the pane, to give the object a name of its own.
  4. Click the eye at the end of a row to hide or show that object.
  5. Use Show all or Hide all at the foot of the pane to act on every object at once.

Tip Hiding the object on top is often the quickest way to work on the one underneath — then show it again when you are done.

Selection Pane

Where to find it
  • Object › Arrange
  • Pane › Chart

Opens the list of the objects in the document, which is the way to reach a chart that is buried under another one or hidden.

  1. Select any chart.
  2. Click Selection.
  3. Click a row to select that object, even if you cannot click it on the page.
  4. Rename a row to make the list readable: without a name every object is just its position in the list.

Tip The pane lists inline objects too, which is why it stays available on a chart that sits in the flow — for those it is the only way to select one that is hard to click.

Delete

Where to find it
  • Object › Arrange
  • Shortcut menu

Removes the selected object from the document. Use it when a picture or shape is no longer wanted, instead of pushing it out of sight.

  1. Click the object you want to remove.
  2. Click Delete.
  3. Check that the text around it has closed up the way you expect.

Tip Removed the wrong one? Undo brings the object back with all of its formatting intact.

Select

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Chooses what the next command acts on: one cell, a whole column, a whole row, or the whole table. Clicking in a cell already picks that cell; this menu reaches the other three without dragging across the table.

  1. Click inside the table.
  2. Click Select.
  3. Choose Select Cell, Select Column, Select Row or Select Table.
  4. The next command applies to what you chose.

Tip Select Table selects every cell, so the next command applies to the whole table.

View Gridlines

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Draws a faint dashed line along every cell edge that has no border, so you can see where rows and columns are. It is a view aid: it is never printed and never exported to PDF or DOCX.

  1. Click inside the table.
  2. Click View Gridlines.
  3. The cell edges without a border appear as dashed lines.
  4. Click it again to turn them off.

Tip The setting belongs to the application, not to the document: turning it on does not change the file.

Table Properties

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Sets, in one window with a section for each part, the properties of the table you are in: the table's preferred width, alignment and left indent; the text wrapping and position of a floating table; the height and options of the selected rows; the preferred width of the selected columns; the width, vertical alignment, margins and text options of the selected cells; the alternative text. Only what you change is written.

  1. Click inside the table, or select the cells whose rows, columns or cells you want to change.
  2. Choose Table Properties.
  3. Pick a section — Table, Position, Row, Column, Cell or Alt Text — and change what you need: a width in centimetres or as a percentage, an alignment, a height of at least or exactly the given value, the margins of a cell. Ctrl+Tab moves to the next section.
  4. In Position, choose Around to let the text flow beside the table, then where it stands relative to the column, the margin or the page, and its distance from the text.
  5. Click OK. A single Undo takes everything back; Cancel or Esc close the window without changing anything.

Tip An empty box, or a check box with a dash, means the selected rows, columns or cells differ: if you leave it alone, each keeps its own value. Edit Alt Text… confirms what you changed and opens the table's alt text window.

Delete Cells

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Removes the selected cells, or the cell the cursor is in, and closes the gap the way you choose: the cells on the right move left and the row gets shorter, the cells below move up, or the entire rows or columns go.

  1. Select the cells to remove, or click in one cell.
  2. Choose Delete Cells, or press Backspace.
  3. Pick Shift cells left, Shift cells up, Delete entire row or Delete entire column, then OK. A single Undo puts the cells back.

Tip With whole rows or whole columns selected, Backspace deletes them at once, without asking.

Delete Rows

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Takes the row the cursor is in out of the table, with everything in it.

  1. Click in any cell of the row you want to remove.
  2. Click Delete Rows.
  3. The rows below move up to close the gap.

Tip The text in the row goes with it; undo brings both back if you remove the wrong one.

Delete Columns

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Takes the column the cursor is in out of the table, with everything in it. The horizontal twin of Delete Rows.

  1. Click in any cell of the column you want to remove.
  2. Click Delete Columns.
  3. The columns to the right move across to close the gap.

Tip Deleting a column is quicker than emptying it, and it leaves the table narrower rather than half blank.

Delete Table

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Takes the whole table out of the document, with everything in it.

  1. Click in any cell of the table you want to remove.
  2. Click Delete Table.
  3. The text around the table closes up where it stood.

Tip It is a single undo step, so Ctrl+Z brings the whole table back if you change your mind.

Insert Above

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Adds an empty row directly above the row the cursor is in. Reach for it when a line of data belongs higher up the table.

  1. Click in a cell of the row you want the new row to sit above.
  2. Click Insert Above.
  3. An empty row is added above the current one, with the same columns.
  4. Click into the new row and type.

Tip Nothing needs to be selected: the new row takes its position from wherever the cursor is.

Insert Below

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Adds an empty row directly under the row the cursor is in. This is the one to use when you are working down a table and need one more line.

  1. Click in a cell of the row you want the new row to follow.
  2. Click Insert Below.
  3. An empty row is added under the current one, with the same columns.
  4. Click into the new row and type.

Tip Click Insert Below again for a second row; each click adds one more.

Insert Left

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Adds an empty column to the left of the column the cursor is in. Use it when the table needs another field before the one you are working in.

  1. Click in a cell of the column you want the new column to sit before.
  2. Click Insert Left.
  3. An empty column is added to the left, spanning every row of the table.
  4. Click into the top cell of the new column and type.

Tip If you meant the other side, use Insert Right.

Insert Right

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Adds an empty column to the right of the column the cursor is in. It is the quickest way to widen a table as the data grows.

  1. Click in a cell of the column you want the new column to follow.
  2. Click Insert Right.
  3. An empty column is added to the right, spanning every row of the table.
  4. Click into the top cell of the new column and type.

Tip To add a column at the very end of the table, put the cursor in the last column first.

Merge Cells

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Joins a block of selected cells into a single cell covering the same area. Use it for a heading that runs across several columns.

  1. Drag across the cells you want to join so the whole block is selected.
  2. Click Merge Cells.
  3. The block becomes one cell spanning the same area.
  4. Click into the merged cell and type.

Tip The command needs a block of cells: with the cursor sitting in a single cell there is nothing to join.

Split Cells

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Splits the cell you are in, or the selected cells, into the number of columns and rows you choose: the column is divided into equal parts and the table keeps its width, and the new rows appear below. The text stays in the first cell.

  1. Click in the cell to split, or select several cells.
  2. Choose Split Cells: the window opens with the number of columns and rows Verbys suggests.
  3. Change Number of columns and Number of rows if you need something else. With several cells selected, Merge cells before split joins them and then splits the block.
  4. Click OK: the new cells stay selected. A single Undo takes everything back.

Tip On a merged cell the suggestion restores it as it was before the merge. Without Merge cells before split, cells from more than one row split only into columns.

Split Table

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Divides the table you are in into two tables, just before the row the cursor is in, with an empty paragraph between them. In the first row it only adds an empty paragraph before the table.

  1. Click in the row that should start the second table.
  2. Choose Split Table, or press Ctrl+Shift+Enter.
  3. Type in the empty paragraph between the two tables if you like. A single Undo puts the table back together.

Tip Ctrl+Enter splits the table in the same place and starts the second table on a new page.

Table Size

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Sets the width and the height of the whole table by typing them, for when dragging a border is not precise enough.

  1. Click in any cell of the table.
  2. Click Table Size.
  3. Type the width and the height you want, in centimetres.
  4. Confirm to resize the table.

Tip The columns keep their proportions to one another: the table scales as a whole.

Cell Size

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Sets the height and the width of the cell the cursor is in by typing them, for tables that have to match an exact measurement.

  1. Click in the cell whose size you want to set.
  2. Click Size.
  3. Type the row height and the column width, in centimetres.
  4. Confirm to apply them.

Tip Height belongs to the whole row and width to the whole column, so the cells beside this one change too.

Distribute Rows

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Gives every row the same height, tidying a table whose rows have drifted apart after a few edits.

  1. Click in any cell of the table.
  2. Click Dist. Rows.
  3. Check the rows now share the height evenly.

Tip The table keeps its overall height — Verbys only shares it out again between the rows.

Distribute Columns

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Gives every column the same width. The fastest way to tidy a table after inserting or deleting columns.

  1. Click in any cell of the table.
  2. Click Dist. Cols.
  3. Check the columns now share the width evenly.

Tip Distribute after inserting a column: a new column takes its width from the grid, not from its neighbours.

AutoFit

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Sets how the table you are in takes its width: AutoFit Contents makes each column as wide as what it holds, AutoFit Window stretches the table across the text column, Fixed Column Width keeps the columns as wide as they are now, whatever you type.

  1. Click inside the table.
  2. Choose AutoFit, then AutoFit Contents, AutoFit Window or Fixed Column Width.
  3. Check the table: a column that follows its contents wraps only the text that does not fit the text column. A single Undo takes it back.

Tip Dragging a column edge fixes the width of the columns it moves: the others keep following their contents.

Align Left

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Lines the text of the chosen cells up on the left of each cell. The natural choice for words and labels.

  1. Click in the cell you want to change, or select several cells.
  2. Click Left.
  3. The text now starts at the left edge of every cell you chose.

Tip Words read best aligned left; figures usually read better aligned right, so the digits line up.

Align Center

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Puts the text midway between the left and right edges of the cell. Suits a short heading sitting over a column of figures.

  1. Click in the cell you want to change, or select several cells.
  2. Click Center.
  3. The text now sits midway across every cell you chose.

Tip Centre the headings if you like, but leave the figures under them aligned right — centred numbers are hard to compare.

Align Right

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Lines the text of the chosen cells up on the right of each cell, so digit sits under digit.

  1. Select the cells that hold the figures.
  2. Click Right.
  3. The numbers now line up on the right edge.

Tip Right alignment is what makes a column of amounts comparable at a glance.

Align Top

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Sets where the text sits between the top and bottom of the cell, pushing it up against the top edge. The difference shows on rows that are taller than their text.

  1. Click in the cell you want to change, or select several cells.
  2. Click Align Top.
  3. The text moves up to the top edge of every cell you chose.

Tip This is the cell's vertical alignment; whether the text sits left, centred or right inside the cell is set separately with the paragraph alignment.

Align Middle

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Centres the cell text between the top and bottom edges — the tidiest choice when the rows are tall.

  1. Click in the cell you want to change, or select several cells.
  2. Click Middle.
  3. The text is centred between the top and the bottom of every cell you chose.

Tip Vertical and horizontal alignment are independent, so a cell can be aligned middle and right at the same time.

Align Bottom

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Pushes the cell text down against the bottom edge of the cell. Useful in a tall row whose text should line up with the row beneath.

  1. Click in the cell you want to change, or select several cells.
  2. Click Align Bottom.
  3. The text moves down to the bottom edge of every cell you chose.

Tip Vertical alignment belongs to the cell, so it holds as you add and remove text.

Text Direction

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table
  • Shortcut menu

Turns the text inside the cell so it reads sideways instead of across. It is how you keep a column narrow when its heading is long.

  1. Click in the cell whose text you want to turn, or select several cells.
  2. Click Text Direction.
  3. Pick the direction from the list that opens.
  4. Check the result and click again until the text reads the way you want.

Tip Turn the headings, not the data: sideways figures are much harder to read down a column.

Cell Margins

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Sets the space left between the text and the cell border. It is the difference between a cramped table and a readable one.

  1. Click anywhere inside the table.
  2. Click Cell Margins.
  3. A dialog opens where you set the space to leave between the cell text and the cell border.
  4. Confirm to apply the new margins to the table.

Tip Margins add space inside the cells, not around the table, so generous margins leave less room for the text and can make the rows taller.

Repeat Header Rows

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Turns the top rows of a table into header rows, which are repeated at the top of every page the table continues on, so a long table always shows its column headings. Header rows always start from the first row: clicking the command makes every row from the first one down to the last selected row a header row. Clicking it again while it is highlighted removes the header from the first selected row to the end of the table.

  1. Click in the first row of the table, or select the rows from the top of the table down to the last one you want to repeat.
  2. Click Repeat Headers: the button stays highlighted while the selected rows are header rows.
  3. To add the next row to the header, click in the row just below the current header rows and click the command again.
  4. To stop repeating, click in a header row and click Repeat Headers again: that row and every row below it stop being headers.
  5. You can also right-click in the table and choose Repeat Header Rows.

Tip The command is greyed out when the selection starts below the header rows or leaves the table: click it anyway to see how to make it available. A table nested inside a cell keeps its header rows, but, as in Word, only the outer table repeats them on each page.

Allow Row to Break Across Pages

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Decides what happens to a table row that does not fit at the bottom of a page. When the command is highlighted, the row may break: the part that fits stays on the page and the rest continues at the top of the next one, cell by cell. When it is not highlighted, the row is kept in one piece and moves whole to the next page. New rows may break, as in Word.

  1. Click in the row you want to change, or select several rows.
  2. Look at Allow Row Break: it is highlighted when every selected row may break across pages.
  3. Click it to switch: when it is highlighted the selected rows may break, otherwise each of them moves whole to the next page.
  4. You can also right-click in the table and choose Allow Row to Break Across Pages.

Tip A row taller than a whole page breaks anyway, even when it is kept in one piece, so that none of its text is lost. The same option is also in the Row section of Table Properties.

Convert to Text

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Takes the table apart and leaves its contents behind as ordinary text. Use it when the grid has served its purpose and you want plain paragraphs back.

  1. Click anywhere inside the table you want to convert.
  2. Click Convert to Text.
  3. Click the arrow next to Convert to Text to choose how the cell contents are separated.
  4. The table is removed and its text stays behind as ordinary paragraphs.

Tip The conversion is a single undo step, so you can put the table back if the plain text is not what you expected.

Header Row

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Tells the table style to treat the top row as the column headings and give it a look of its own. Turn it on when the first row names the columns rather than holding data.

  1. Click inside the table.
  2. Tick the Header Row check box.
  3. The top row takes on the heading look of the current table style.
  4. Clear the check box to make the top row look like the rest.

Tip The switch changes only the look: it does not add a row or move any of your text.

Banded Rows

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Shades every other row so the eye can follow one line across a wide table without slipping onto the next.

  1. Click inside the table.
  2. Tick the Banded Rows check box.
  3. Alternate rows pick up the shading of the current table style.
  4. Clear the check box to go back to plain rows.

Tip Worth it on tall tables; over three or four rows the stripes add noise rather than help.

Total Row

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Adds a closing row at the foot of the table for the totals, set apart from the data above it.

  1. Click inside the table.
  2. Tick the Total Row check box.
  3. A closing row for the totals appears at the foot of the table.
  4. Clear the check box to take it away again.

Tip It pairs with Header Row: one marks the top of the table, the other its foot.

First Column

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Treats the leftmost column as labels rather than data, so the table style sets it apart from the columns beside it.

  1. Click inside the table.
  2. Tick the First Column check box.
  3. The first column takes on the emphasis of the current table style.
  4. Clear the check box to make it look like the other columns.

Tip Use it with Header Row when the table has headings across the top and labels down the side.

Banded Columns

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Shades every other column, so a table read down its columns is as easy to follow as one read across its rows.

  1. Click inside the table.
  2. Tick the Banded Columns check box.
  3. Alternate columns pick up the shading of the current table style.
  4. Clear the check box to go back to plain columns.

Tip Banded Rows and Banded Columns can both be on, but the crossing stripes are hard to read: choose the direction your readers scan.

Last Column

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Sets the rightmost column apart from the ones before it, as First Column does at the other end of the table. Turn it on when the last column holds a summary rather than more data.

  1. Click inside the table.
  2. Tick the Last Column check box.
  3. The last column takes on the emphasis of the current table style.
  4. Clear the check box to make it look like the other columns.

Tip Leave it off when the final column is just more data: emphasis on the wrong column misleads the reader.

Shading

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Paints a background colour behind the cells you have chosen, for when the banding of a table style is not the emphasis you want.

  1. Click in the cell you want to paint, or select several cells.
  2. Click Shading.
  3. Choose a colour from the palette that opens.
  4. Choose No Fill in the same palette to let the table style show through again.

Tip Shading you apply by hand wins over the table style, so it survives a change of style.

Borders

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Draws lines around the cells you have chosen — the outline of the table, the rules between rows, or one single edge. An edge shared by two cells is a single line: if the two cells ask for different ones, the heavier one wins, just as in Word.

  1. Click in the cell you want to line, or select several cells.
  2. Click Borders.
  3. Choose which edges to draw from the menu that opens.
  4. Choose No Border in the same menu to clear them.

Tip The lines take the colour and the thickness set in Pen Color and Pen Weight.

Draw Table

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Turns the pointer into a border pen, so you can put a line exactly where you want it instead of setting borders cell by cell.

  1. Click in the table you want to draw on.
  2. Click Draw Table.
  3. Click a line of the table's grid to draw it.
  4. Click Draw Table again, or press Esc, when you have finished.

Tip Set Pen Color and Pen Weight first — the pen draws with whatever is armed.

Pen Color

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Sets the colour the border pen puts down, and arms the pen. The Borders menu draws with the same colour.

  1. Click in the table you want to draw borders on.
  2. Click Pen Color.
  3. Choose one of the eight colours; the pen is armed.
  4. Click the lines of the grid you want in that colour.

Tip The colour stays armed for every line you draw next, so set it once and draw several borders.

Pen Weight

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Sets how thick the border pen draws, from a quarter of a point to six points, and arms the pen.

  1. Click in the table you want to draw borders on.
  2. Click Pen Weight.
  3. Choose a thickness from the menu that opens; the pen is armed.
  4. Click the lines of the grid you want at that weight.

Tip Keep the heavier weights for the outline and the rule under the headings, and the thin ones for the lines inside.

Eraser

Where to find it
  • Object › Tables and Charts › Table
  • Pane › Table

Removes border lines: switch it on, then click the lines you want gone.

  1. Click in the table with the borders you want to remove.
  2. Click Eraser.
  3. Click each line of the grid you want to rub out.
  4. Click Eraser again, or press Esc, to put it away.

Tip The eraser stays on until you switch it off, so a stray click carries on removing lines.

Add Chart Element

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Chooses what the chart shows — title, axis titles, legend, data labels, gridlines, trendline and error bars — in one window that shows the chart while you compose it.

  1. Click the chart.
  2. Press Add Element.
  3. The window lists the seven elements with their current state, and the chart beside them: turn on, turn off or change what you need and watch the preview.
  4. Press OK to apply everything at once, or Cancel to leave the chart as it was.

Tip The preview is the real chart: what you see is what you get. Everything you change in the window forms a single undo step, and the window offers only the elements this chart type can show — a pie has no gridlines, trendline or error bars.

Quick Layout

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Choose the chart's arrangement — legend, data labels and gridlines — in a window that shows each one drawn on your own chart, instead of reading a list of names.

  1. Click the chart.
  2. Press Quick Layout: a window opens with one tile per arrangement, each drawn on your chart.
  3. Pick a tile: the large preview shows it in the frame the chart really has, and under it you read which switches that arrangement sets.
  4. Press Apply. The titles you wrote stay: an arrangement changes what is shown, never what you typed.

Tip The arrangements offered depend on the chart type: a pie has no gridlines, so it offers fewer — and no two of them are ever the same drawing.

Chart Styles

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Changes the overall look of the chart — its background, its frame and its gridlines — without touching the data or the series colours.

  1. Click the chart.
  2. Click Styles. A window opens with your own chart drawn in every style.
  3. Pick a tile: the rows change the background — none, a pale panel, a pale plot area or a dark panel — and the columns change the gridlines — none, values or both axes.
  4. Turn on Frame to add a thin border; every tile is redrawn.
  5. Watch the large preview on the left, then click Apply. Cancel leaves the chart as it was.

Tip Pick the style from where the chart sits, not from the chart: a pale panel separates it from a dense page, while on a page that is already busy the plain tile usually reads better.

Change Colors

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Chooses the colours of the series in a window that shows them painted on your own chart, with the strip of colours that will be applied alongside.

  1. Click the chart.
  2. Press Change Colors: a window opens with one tile per colour set, each drawn on your own chart.
  3. Pick a tile: the large preview shows it in the frame the chart really has, and below it you read the colours that will be applied.
  4. Press Apply. On a pie or a doughnut the set colours the slices, because there it is the points the reader compares.

Tip Colour sets are built on the accent colours of the document theme, so the same tile comes out different in a document with another theme. The window only offers sets that draw something different: on a chart with a single series it offers fewer.

Chart Colors

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Gives each series of the chart — or, in a pie or doughnut, each slice — a color of its own, picked while you watch the chart change.

  1. Click the chart.
  2. Press Colors.
  3. On the right pick the item to color: each row shows the color it has now.
  4. Pick a color from the palette and watch the preview on the left.
  5. Repeat for the other items, then press Apply.

Tip The palette is built from the document's theme colors, so a color picked by hand stays in the same family as the others. Automatic removes the color and gives the item back to the theme. Everything you change before Apply counts as a single undo.

Switch Row/Column

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Chooses how the chart reads its data: which band goes on the axis and which into the legend. The two readings are shown side by side, so you can compare them before applying.

  1. Click the chart.
  2. Click Switch Row/Column: a window opens with the two readings.
  3. Compare the two tiles — each is your own chart in that direction — and read underneath the preview which labels end up on the axis and which in the legend.
  4. Choose Rows and columns swapped and click Apply; choosing As it is now leaves everything as it is.

Tip The title, the legend position, the axis titles, the gridlines and the number format are kept. Colours set on individual series, trendlines and error bars are not: after the swap the series are different things, so they go back to automatic — and the window tells you before you apply. The command is off on pie, scatter and stock charts, where swapping would take away what the chart says.

Edit Data

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart
  • Shortcut menu

Opens the table behind the chart: one row per category, one column per series, with the chart next to it changing as you type. Editing the data touches the numbers only — title, legend, colours and style stay as they are.

  1. Click the chart.
  2. Press Edit Data.
  3. Move with the arrow keys: the chosen cell shows its contents highlighted, and typing replaces them. Press Enter to drop down one row, Tab to move to the next cell.
  4. To correct a value instead of rewriting it press F2, or click inside the cell you are already on: a text cursor appears, the left and right arrows move between characters, Shift selects, and Ctrl+C, Ctrl+X and Ctrl+V work as in any other box. Esc puts the original value back without closing the window.
  5. The series names and the category labels are text boxes too: you type in them just like in the number cells, and only the top-left corner is fixed.
  6. Insert row and Insert series add where the cursor is; Delete row and Delete series remove what it sits on.
  7. Press Apply: the chart redraws on the new numbers and keeps everything else.

Tip Ctrl+Enter applies from any cell, without reaching for the button. The command is off on scatter and bubble charts and on the newer chart types: their numbers do not fit a single category column. Everything else — area, radar, stacked, combined and stock charts — can now be edited, including charts that came from Word.

Change Chart Type

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Turns the chart into another type, keeping the same figures. A window shows every type drawn on your own chart, and says what the conversion will remove before you apply it.

  1. Click the chart.
  2. Press Change Type: a window opens with one tile per type, each one your own chart already converted, grouped by family.
  3. Choose a tile, read the outcome under the preview — series kept, series removed, axes — then press Apply.

Tip Before choosing Pie or Doughnut, look at Series removed: those types show one series only, so the others are dropped. The tile of the type the chart already has keeps a thin outline, so you can always go back.

Chart Element

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Chooses which part of the chart the fill and outline commands apply to. It opens a window showing your chart: the part in force is ringed on it, and you pick another by clicking it.

  1. Click the chart.
  2. Click Selection.
  3. The window shows your chart on the left and the list of its parts on the right.
  4. Click a part on the chart itself, or pick its row: the chart area is the whole box, the plot area is only the rectangle the series are drawn in.
  5. Each series row carries the colour the chart paints for it; on a pie the list shows the slices.
  6. Click Select. Now use Fill and Outline: they act on what you picked.
  7. The choice applies to the selected chart: select another chart, or click elsewhere, and it starts again from the chart area.

Tip Under the chart the window says in advance what you will be able to change: Fill and outline on an area, Fill only on a series. A series has no outline that the chart draws, so Outline stays greyed out there.

Reset to Match Style

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Opens a window that shows what will be cleared before it is cleared: the chart as it is now, above the chart it would become.

  1. Click the chart.
  2. Click Reset Style. The button is greyed out when the chart carries no formatting of its own.
  3. The list shows one row for every thing the chart carries — Chart Area, Plot Area, Colors — and every row starts ticked: untick what you want to keep and watch the lower picture change.
  4. Click Restore. What you wrote is kept: title, axis titles, legend, data labels, gridlines and the data itself.

Tip Background and frame are the style chosen in the Chart Styles gallery: untick Chart Area to keep the style and clear only the colours set by hand. Either way it is a single undo step.

Chart Element Fill

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Fills the part of the chart you choose with a solid colour, in a window that shows the result on the real chart before you apply it.

  1. Click the chart.
  2. Click Shape Fill.
  3. In the list, pick what to fill: the chart area, the plotted area, or a series — on a pie, one slice.
  4. Pick a colour from the palette, or the entry above it that leaves the part without a fill, then press Apply.

Tip On a pie or a doughnut the colour belongs to the slices and not to the series, so the list shows one row per slice. On a series that entry is called Automatic: it removes the colour instead of setting one, and the series goes back to following the document theme.

Chart Element Outline

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Sets the border of the chart area or the plot area: colour, weight and dash pattern together, in one window that shows the chart while you choose.

  1. Click the chart.
  2. Pick the chart area or the plot area.
  3. Click Shape Outline.
  4. Choose a colour, a weight and a dash pattern; the preview shows the chart as it will look.
  5. Click Apply, or No Outline to take the border away.

Tip Automatic and No Outline are not the same answer: Automatic drops the setting and lets the chart style decide again, while No Outline records that you took the border off. A theme colour keeps following the document theme if you change it later; a standard colour does not.

Chart Element Effects

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Adds a shadow or a glow to the chart area or the plot area: two axes that combine, in one window that shows the chart while you choose.

  1. Click the chart.
  2. Pick the chart area or the plot area.
  3. Click Shape Effects.
  4. Pick a direction in the shadow grid, or a tint in the glow row; the sliders set transparency, size and distance.
  5. Click Apply.

Tip The centre cell of the grid switches the shadow off, and the None row does the same for the glow, so you can turn one off without losing the other. An area shrinks a little to make room for its own halo: that is why a chart gets slightly smaller when you give it a shadow, and why the effect never spills onto the page.

Chart Text Colour

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Sets the colour of the text a chart draws — all of it at once, or one part such as the title, the legend or the data labels — in a window that shows the result on the real chart and says when the text would be hard to read.

  1. Click the chart.
  2. Click Text Fill.
  3. In the list, pick what to colour: all the chart text, or one part such as the chart title, the axis labels, the legend or the data labels.
  4. Pick a colour from the palette, or Automatic to hand the choice back to the app, then press Apply.

Tip The list shows only the parts this chart actually draws: a pie has no axis labels, and a chart without a title has no title row. All chart text is the default every part follows until you give that part a colour of its own.

Chart Text Outline

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart

Outlines the letters of the chart text — the title, the axis titles, the axis labels, the legend, the data labels — with a colour, a weight and a dash pattern chosen while you look at the chart.

  1. Click the chart.
  2. Click Text Outline.
  3. Pick which text you are dressing: all the chart text, or one of the texts the chart actually paints.
  4. Choose a colour, a weight and a dash pattern; the preview shows the chart as it will look.
  5. Click Apply, or No Outline to take the outline away.

Tip The same weight is a hairline on a 14 pt title and a blot on 9 pt axis labels, because the stroke grows half-way inside the letters. The window measures the outline against the body the chart actually paints, and says so when the counters are closing.

Alt Text

Where to find it
  • Object › Tables and Charts › Chart
  • Pane › Chart
  • Shortcut menu

Writes the description that reaches a reader who does not see the chart — a screen reader, or anyone whose images are turned off.

  1. Click a floating chart.
  2. Click Alt Text.
  3. Write one or two sentences saying what the chart shows, not what it is: the point the reader would take from it.
  4. Click OK.

Tip Say the conclusion, not the machinery: "Sales grew every quarter of 2026, doubling by December" tells the reader what the chart tells everyone else, while "column chart with four series" does not.

Edit Picture

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Opens the picture in the suite's image editor, where you can draw on it, cover something up, crop it, straighten it or write on it. Unlike Corrections and Color, what you do here changes the picture itself, not just the way it is shown.

  1. Click the picture you want to change.
  2. Click Edit Picture.
  3. Draw, erase, crop, rotate or write on the picture with the tools in the editor.
  4. Click Apply to put the edited picture back in the document, or Cancel to leave it as it was.

Tip The command stays greyed out for a linked picture, whose file the document does not contain. Undo brings the previous picture back.

Remove Background

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Finds the subject of a picture and makes everything around it transparent. The window proposes an outline as soon as it opens; you correct it by painting over what to keep and what to remove, and the outline follows.

  1. Click the picture you want to cut out.
  2. Click Remove Background. The window opens and proposes an outline: everything under the magenta veil will be removed.
  3. If part of the subject is missing, choose Mark areas to keep and paint over it; if part of the background survives, choose Mark areas to remove and paint over that. The outline updates after every stroke.
  4. Use Adjust the area to keep when the subject was cut off by the initial frame, and the brush sizes for fine detail.
  5. Click the eye button to see the real transparency instead of the veil, then click Apply.

Tip The result is always saved as a PNG, because transparency needs one. The command stays greyed out for a linked picture, whose file the document does not contain, and Undo brings the previous picture back.

Erase

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Removes parts of the picture instead of covering them: whatever you erase becomes transparent, so what is behind shows through. It is the way to take a face, a number plate or a background out of a photo — covering it with a white rectangle only works while the background is white. Unlike Corrections and Color, this changes the picture itself, not the way it is shown.

  1. Click the picture you want to change.
  2. Click Erase.
  3. Drag over the picture with the eraser: whatever you go over becomes transparent.
  4. Or choose the wand and click a background: every neighbouring pixel of a similar colour goes at once. The tolerance steps widen or narrow what it takes.
  5. Use the restore brush to bring back anything you removed by mistake, then click Apply to put the erased picture back in the document, or Cancel to leave it as it was.

Tip An erased picture is saved as PNG even when it arrived as a JPEG, because JPEG cannot hold transparency. The command stays greyed out for a linked picture, whose file the document does not contain, and Undo brings the previous picture back.

Corrections

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Fine-tunes the sharpness, brightness and contrast of a picture. It is the first thing to try on a photo that looks flat, soft or too dark.

  1. Click the picture you want to correct.
  2. Click Corrections.
  3. A window opens with a large preview, a thumbnail of your picture for every preset and three sliders: drag one until the preview looks right, then click Apply. Reset puts all three back to normal.
  4. For a quick preset, click the arrow next to Corrections instead: pick one of the five sharpness amounts, or a cell of the brightness and contrast grid.
  5. Picture Corrections Options, at the bottom of that menu, opens the same window.

Tip Corrections change how the picture is shown, not the file behind it: to clear them, open the window again and click Reset. On a picture whose sharpness Office has already applied to the pixels, the Sharpen/Soften section shows a note instead of its thumbnails; Brightness/Contrast still works.

Color

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Changes a picture's colour: how strong the colours are, how warm or cool the light looks, and whether the whole picture is retinted in a single hue. Each choice is shown on the picture itself, so you choose what you can already see.

  1. Click the picture you want to change.
  2. Click Color: the Picture Color window opens, with a live preview of your picture beside the settings.
  3. Pick a thumbnail under Color Saturation, Color Tone or Recolor — the three settings are independent, so choosing one keeps the other two — or drag the Saturation and Temperature sliders for an exact value. The preview follows every change.
  4. For a colour the bands do not offer, click More Variations: pick your colour and the window comes back with it applied, so you can still see it before you commit.
  5. Click Apply to put the change in the document, or Cancel to leave the picture as it was.

Tip Apply stays off until something changes, and Reset takes Saturation, Temperature and Recolor back to the original in one click. Each thumbnail shows your picture under that preset combined with what the other settings already are, so it shows where you would land — not the preset on its own. On a picture whose colour saturation and tone Office has already applied to the pixels, the Color Saturation and Color Tone bands show a note instead of their thumbnails; Recolor still works, and a picture replaced with Change Picture can be adjusted again. The saturation and tone you choose here — like sharpness and artistic effects — also show in Word: the file carries the adjusted picture together with its original, and when you reopen it they are still editable (not for a GIF, BMP or WebP picture).

Artistic Effects

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Makes a picture look hand-made — a pencil sketch, a mosaic of bubbles, chalk on paper, canvas. The effect changes how the picture is drawn, never the picture file itself, so removing it gives you the original photograph back.

  1. Click the picture you want to change.
  2. Click Artistic Effects: a window opens with a live preview of your picture beside the twenty-three effects.
  3. Click an effect — the preview shows it on your own photograph straight away.
  4. Fine-tune it with the two sliders under the gallery: the first is named after the effect you chose (Size, Pressure, Number of Shades…), the second is Transparency, which fades the effect back towards the original picture.
  5. Click Apply. To go back to the untouched photograph, click Remove effect.

Tip Every thumbnail shows the effect on your own picture, so you can compare them instead of trying them one by one. The sliders appear only once you have chosen an effect — with None there is nothing to adjust. Apply stays off until something changes, and the whole thing is a single undo step. On a picture whose effects Office has already applied to the pixels, Artistic Effects is greyed out: press it and a window explains why and what to do.

Transparency

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Makes a picture see-through, so whatever sits behind it — the page, the text, another object — shows through. Use it to turn a photo into a watermark, or to soften a background image so the words on top stay readable.

  1. Click the picture you want to change.
  2. Click Transparency: the Picture Transparency window opens, with a live preview of your picture on the page colour.
  3. Pick one of the seven presets, or drag the Transparency slider for an exact value: 0% is the full picture, 100% is invisible. The preview follows every change.
  4. Click Apply. To make the picture solid again, open the window and click Reset.

Tip The preview sits on the document's page colour, because a transparency can only be judged against what is behind it.

Compress Picture

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Makes a picture lighter by storing fewer pixels for it. A photo taken by a phone often carries several times more pixels than the page can show, and those pixels travel inside the document forever: compressing throws away the ones nobody sees. The window shows both sides of the trade at once — how many bytes you save, and how the picture looks once it has been reduced.

  1. Click the picture you want to compress.
  2. Click Compress Picture.
  3. Pick a resolution: each row shows the pixels it leaves and the bytes it costs for this picture.
  4. Drag the handle across the preview to compare: the original is on the left, the compressed picture on the right.
  5. Click Apply.

Tip The byte size in each row is measured by encoding the picture for real, not estimated. Targets finer than the picture already is are not listed, because they would only make the file bigger. Compressing never moves the picture on the page: it changes how many pixels it stores, not how big it is shown.

Change Picture

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture
  • Shortcut menu

Replaces the selected picture with a different one, keeping its position and formatting. You choose the new picture from your device, Aerarys or your Photos library, and then decide how it goes into the frame the old one occupied — seeing the result before you confirm it.

  1. Click the picture you want to replace.
  2. Click Change Picture: the picture chooser opens on the source you used last. The arrow next to it goes straight to This Device, From Aerarys or From Photos.
  3. Choose the new picture: the Change Picture window opens and shows the frame your picture occupies with the new picture inside it.
  4. Choose how it fits. Fill the frame keeps the frame exactly as it is and crops what is left over; Fit in the frame shows the whole picture and shrinks the frame around it; Original size gives the picture its own size. Each option shows the size it produces.
  5. With Fill the frame you can drag the picture to move it inside the frame and scroll to zoom in; Recentre puts the framing back where it started.
  6. Click Replace: the new picture takes the place of the old one.

Tip Border, effects, alt text and position stay as they are — only the picture changes. Fill the frame is the only choice that leaves your layout exactly where it is, which is why it is the one you start on. Ctrl+Z brings the old picture back in a single step.

Reset Picture

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Puts a picture back the way it came in, dropping every change you have made to it. Use it when a run of adjustments has gone the wrong way.

  1. Click the picture you want to restore.
  2. Click Reset Picture: the Reset Picture window opens.
  3. Compare the two previews — Now and After restoring — and read the list of adjustments the picture carries.
  4. Every adjustment starts ticked: clear the tick of anything you want to keep.
  5. Click Restore. Everything left ticked goes back at once, in a single undo step.

Tip The command stays greyed out on a picture that carries no adjustment: there would be nothing to restore.

Picture Styles

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Puts the picture inside a ready-made frame: a white border with a soft shadow, rounded corners with a reflection underneath, an oval with soft edges. You choose by looking at twenty-two frames on your own photo, then move away from any of them with the controls underneath.

  1. Click the picture you want to frame.
  2. Click Picture Styles: the window opens with a live preview of your picture and twenty-two frames applied to it.
  3. Click a frame to apply it whole, then adjust it with the controls below: Shape, Border colour and width, Shadow, Reflection and Soft edges.
  4. Click Apply. To go back to the bare picture, open the window and click Remove frame.

Tip The preview shows the frame at the size the picture really has in the page: a 7 pt border is half the height of a small photo and a hairline on a full-page one.

Picture Border

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Draws a line around a picture. The Picture Border window shows the border on your own picture, at the size it will have on the page, and lets you choose its colour, weight, dash pattern and compound type independently of one another.

  1. Click the picture you want to frame.
  2. Click Picture Border. The window opens with your picture on the left.
  3. Choose a colour, a weight, a dash pattern and a compound type. Each one changes only its own axis, so you can combine them freely.
  4. Watch the preview, then click Apply. Remove border takes the border away.

Tip Weights are drawn at their real thickness and dash patterns as drawings, so hover a cell to read its name; on a weight the tooltip gives the value in points.

Picture Effects

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Adds a shadow, a reflection, a glow, soft edges or a bevel to a picture, so it reads as an object placed on the page rather than as part of it. The five effects are independent: a picture can carry a shadow and soft edges at the same time.

  1. Click the picture you want to change.
  2. Click Picture Effects.
  3. In the Shadow grid, click the square on the side you want the shadow to fall on; the middle square takes the shadow away.
  4. Use the sliders for transparency, size and distance, and the sections below for reflection, glow, soft edges and bevel.
  5. Click Apply. Remove all effects, at the far left, clears all five at once.

Tip Every slider is live: dragging one up from zero switches its effect on with sensible values, and taking transparency to 100% switches it off again — so you can try an effect and take it away without leaving the window.

Picture Layout

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Turns the picture into a diagram with a caption: the photo keeps its size and gains a text band below, above, beside or over it. You choose the arrangement by seeing it on your own picture, and type the caption in the same window.

  1. Click the picture you want to arrange.
  2. Click Picture Layout. You can also click the small badge that appears next to the selected picture.
  3. The window opens with a live preview of your picture and four arrangements: caption below, caption above, caption beside and caption over the picture.
  4. Click an arrangement — the preview updates, showing the shape the figure will really have on the page.
  5. Type the caption in the box underneath, then click Apply.
  6. To change the arrangement or the caption later, select the figure and click Picture Layout again: the window reopens on the current arrangement, and Remove layout turns it back into a plain picture.

Tip The picture keeps the size it had: the diagram grows by the height of the caption band instead of shrinking the photo to make room for the text. Converting is a single undo step.

Alt Text

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture
  • Shortcut menu

Stores a short written description of an object for people who cannot see it. The dialog shows the object beside the box you describe it in, and lets you mark it as decorative instead — something a screen reader should skip.

  1. Click the picture or shape you want to describe.
  2. Click Alt Text.
  3. Type a description in the large box: the object is shown next to it, and a line underneath points out anything worth fixing.
  4. For an object that carries no meaning — a divider, a flourish — tick Mark as decorative instead: screen readers will skip it and no description is needed.
  5. Choose OK to store your choice with the object.

Tip Describe what the object means in its context, not what it literally shows — the description is heard in place of the picture, not alongside it. One or two sentences are usually enough, and the counter under the box shows how far you are from that.

Bring forward

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Moves the selected object one step up the stack, in front of whatever is covering it. Use it when overlapping pictures or shapes hide each other.

  1. Click the object that is being covered.
  2. Click Bring Fwd.
  3. Click the arrow next to Bring Fwd for the other ways of moving it up the stack.
  4. Repeat until the object sits where you want in the pile.

Tip If the object you need is buried deep, it is often fewer clicks to send the one on top backwards instead. To see the whole stack at once, choose Reorder Objects from the arrow: it lists every object from front to back and shows which one covers which.

Send backward

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Opens the Stacking Order window: the objects on the page appear as a pile, front to back, so you can see what covers what and put the picture exactly where you want it.

  1. Click the picture you want to move back.
  2. Click Send Backward: the Stacking Order window opens.
  3. Click the row you want the picture to go behind, or use the four buttons beside the list to move it one row at a time.
  4. Click Apply. However far the picture moved, it is a single undo step.

Tip A dot on a row means that object really covers your picture: only the rows with a dot change what you see.

Selection pane

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Opens a side pane listing every object on the document — pictures, shapes, charts. Click a row to select that object, use the eye to hide it, or rename it so one object can be told from another. It is the only way to reach an object that is buried under another one or already hidden, and it lists objects that sit in the text as well as floating ones.

  1. Click Selection Pane.
  2. Click a row in the pane to select that object on the page.
  3. Double-click a row, or click Rename at the foot of the pane, to give the object a name of its own.
  4. Click the eye at the end of a row to hide or show that object.
  5. Use Show all or Hide all at the foot of the pane to act on every object at once.
  6. Drag the bar on the left edge of the pane to make it wider or narrower.

Tip The pane stays open while you work, so you can pick a buried picture from the list and then move or resize it on the page — hiding the object on top is often the quickest way to get at the one underneath.

Align

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Puts the selected picture against an edge of the margin or of the page, or centres it there. Choosing the frame is half the command: aligning to the page and aligning to the margin differ by the width of the margin, and the window shows you which one you are aiming at.

  1. Click the picture you want to move.
  2. Click Align. The window opens and nothing has moved yet.
  3. Under “Relative to”, pick Margin (the area the text flows in) or Page (the whole sheet).
  4. Pick a Horizontal alignment, a Vertical one, or both — each axis can be left Unchanged, which is how you move a picture sideways without pulling it away from its paragraph.
  5. Watch the preview: the dashed rectangle is the frame, and the solid rectangle is where the picture will land.
  6. Click Align. Both axes are applied together, so one undo puts everything back.

Tip A rotated picture is aligned by the box you can actually see, not by its unrotated size — so a tilted picture lands inside the frame instead of straddling its edge. The arrow next to Align still holds the six quick alignments, always relative to the margin.

Group

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Ties a picture together with the other objects on its page, so they move, align and are deleted as one. Verbys selects one object at a time, so the window is where you say which objects belong together — and the frame drawn on the map shows the shape the group will have before you make it.

  1. Click the picture you want to group.
  2. Click Group. The window opens on the objects of that page; the picture you started from is already in the group and has no check box.
  3. Tick every object that belongs with it, in the list or straight on the map. The frame grows to show what the group will cover.
  4. Read the sentence above the buttons: it says how many objects the group will hold.
  5. Click Group. From now on, moving, aligning or deleting any member moves, aligns or deletes them all, in a single undo.
  6. Use the arrow next to Group for Ungroup, or for Regroup to bring back the last group you took apart.

Tip Every object in a Verbys group keeps its own picture commands: you can still crop, recolour or rotate a single member without leaving the group. What the group governs is where the objects sit and how long they live.

Rotate

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Opens a window where you turn the picture by dragging a dial and read the angle in degrees as you go — any angle, not only quarter turns — and where you can flip it to its mirror image. The arrow next to the button keeps the four quick ways.

  1. Click the picture you want to turn.
  2. Click Rotate.
  3. Drag the dial to the angle you want, or use − and + to step one degree at a time.
  4. Use the quarter-turn buttons for an exact 90° or 180°, and Flip to mirror the picture.
  5. Click Rotate to apply, or Straighten to bring it back upright.

Tip Straighten clears the angle and both flips in one go. To straighten a scan that came in slightly askew, drag the dial a little and fine-tune with − and +: the dial does not snap.

Crop

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Cuts away the edges of a picture so only the part you want is left. Crop opens a window showing the whole picture, with the part you are cutting away dimmed rather than hidden — so putting a piece back is as easy as taking it off. The picture is never squashed: the frame follows the crop, so what stays keeps the size it had on the page.

  1. Click the picture you want to crop.
  2. Click Crop.
  3. Drag inside the crop window to move it, or drag a corner or edge handle to resize it.
  4. To cut to a set shape, pick one under Proportions — Square, 4:3, 16:9 and the others apply straight away.
  5. Click Crop to apply. Remove crop, in the window, puts the whole picture back.

Tip In the menu, the quicker ways follow the Crop item: Crop on the page drags handles directly on the document, Crop values… takes exact percentages, and Remove crop clears the crop without moving the frame.

Height

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Sets how tall the picture is on the page. The Picture Size window shows width and height together with the scale of the original picture, so you can also ask for half the size or go back to the original.

  1. Click the picture you want to resize.
  2. Click Height: the Picture Size window opens with the cursor in the Height box.
  3. Type the value you want and press Tab: with Lock aspect ratio on, the other side follows and the picture is not squashed.
  4. To resize by proportion instead, type a percentage in Scale height: 50 makes the picture half the size of the original.
  5. Click Apply.

Tip The preview draws the width the page allows as a frame: if the picture sticks out of it, it will stick out on the page too.

Width

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Sets how wide the picture is on the page. The Picture Size window shows width and height together with the scale of the original picture, so you can also ask for half the size or go back to the original.

  1. Click the picture you want to resize.
  2. Click Width: the Picture Size window opens with the cursor in the Width box.
  3. Type the value you want and press Tab: with Lock aspect ratio on, the other side follows and the picture is not squashed.
  4. To resize by proportion instead, type a percentage in Scale width: 50 makes the picture half the size of the original.
  5. Click Apply.

Tip The preview draws the width the page allows as a frame: if the picture sticks out of it, it will stick out on the page too.

Edit Shape

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Changes the outline of the selected shape. You can replace it with another shape from the catalogue — seeing how each one looks at the size your shape actually has — or edit its points one by one.

  1. Click the shape you want to change.
  2. Click Edit Shape: the window opens on Replace Shape.
  3. Pick a shape from the catalogue on the right: the stage shows what you will get, and the shape you started from stays visible underneath.
  4. To work on the outline instead, click Edit Points at the top of the window: drag a point to move it, drag its handles to bend the curves, and use the list on the right to add or remove points.
  5. Click Apply.

Tip Replacing a shape keeps its size, fill and outline — only the silhouette changes. Editing points is different: the shape stops being a preset shape and keeps the outline you drew.

Edit Text

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape
  • Shortcut menu

Writes or corrects the text inside the selected shape. You type in a comfortable box and see the result on the shape itself, at the proportions it really has.

  1. Click the shape you want to write in.
  2. Click Edit Text.
  3. Type in the box on the right: the preview on the left shows the text on the shape itself, as it will look.
  4. Press Enter for a new paragraph. If a line appears under the preview, the text does not fit in the shape.
  5. Click Apply, or press Ctrl+Enter.

Tip Paragraphs you do not change keep their formatting: correcting one word does not make the whole shape bold. Apply stays off until you have typed something.

Combine Shapes

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Builds one new shape out of two or more on the page: joining them, keeping only what they share, cutting one out of another, or splitting them along their overlaps. A window shows the result before you commit to it.

  1. Click a shape on the page.
  2. Click Combine Shapes.
  3. Tick the other shapes you want to combine with it.
  4. Choose an operation and watch the preview on the map of the page.
  5. Click Combine.

Tip The shape you clicked is the first one: it is what Subtract removes the others from, and the result keeps its fill and outline.

Shape Styles

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Applies a coordinated fill and outline in one gesture, using the colours of the current theme so the shape matches the rest of the document.

  1. Click the shape you want to restyle.
  2. Click Shape Styles — the window opens on your own shape.
  3. Pick a style: every tile shows it on the shape you selected, at the size it has in the document.
  4. If one detail is not right, adjust the fill, the outline colour, its weight or its dashes without leaving the window.
  5. Click Apply.

Tip Starting from a theme style and adjusting it beats building a look colour by colour: when the theme changes, the shape follows.

Shape Fill

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Opens a window where you compose the fill of the shape — a solid colour, a gradient or a texture — and see it on the shape itself before you apply it.

  1. Click the shape you want to fill.
  2. Click Shape Fill: the window opens on the fill the shape has now.
  3. Pick a kind — solid colour, gradient or texture — then its colour, and drag Transparency to let through what sits behind the shape.
  4. Click Apply. To leave the shape as an outline only, click No Fill.

Tip Switching kind keeps what you composed in the others: try a gradient, go back to a solid colour, and the gradient is still there when you return. For a quick colour, use the arrow next to the button instead of the window.

Shape Outline

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Sets the line around the shape: its colour, how thick it is, whether it is dashed, and what its ends look like.

  1. Click the shape whose outline you want to change.
  2. Click Shape Outline: a window opens showing the outline on your own shape, at its real size.
  3. Choose the colour, the weight and the dash pattern; on a line or a connector you can also choose the arrowhead at each end.
  4. Click Apply to write them all as a single change, or No Outline to remove the outline.
  5. Check the outline is still readable at the size the shape is used.

Tip On a line or an arrow the outline *is* the shape: weight and arrowheads are the only things that change how it reads.

Shape Effects

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Adds a shadow, a reflection, a glow, soft edges, a bevel or depth to the shape. The six are independent: a shape can carry a shadow and soft edges at the same time.

  1. Click the shape you want to add effects to.
  2. Click Shape Effects: a window opens showing the effects on your own shape, over the page background and at its real size.
  3. For the shadow, click the square that shows the direction you want it to fall in; the centre square means no shadow. Then set how transparent, how blurred and how far it is.
  4. Do the same for the other axes: pick a tint for the glow, and drag the sliders for reflection, soft edges, bevel and depth. Each one is separate, so switching one off leaves the others alone.
  5. Click Apply to write them all as a single change, or Remove all effects to clear them.
  6. Check the shape still reads at the size it is used: a large glow or a wide bevel eats into the shape itself.

Tip Effects are measured in points, not in percentages: the same 3 pt shadow is half a small shape and a hairline on a big one. That is why the preview uses your shape's real size.

WordArt Styles

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Dresses the text inside the shape: the fill and the outline of the letters, plus the shadow, the reflection and the glow around them. The five are independent, so a text can carry a fill and a glow at the same time.

  1. Click the shape whose text you want to dress. The command stays greyed out until the shape contains text.
  2. Click WordArt Styles: a window opens showing your own text, at the size it has in the document and over the shape's own fill.
  3. Pick a tile: each row is one look — fill, fill and shadow, outline, reflection, glow — and each column is one theme accent.
  4. Use the controls underneath to move a step away from the tile: the tint of the text fill and of its outline, the outline weight, the square that shows which way the shadow falls, how much of the reflection stays visible, and the tint and radius of the glow.
  5. Click Apply to write the whole style as a single change, or Remove style to take the decoration off.

Tip A WordArt style dresses the whole text of the shape, not a selected word. Watch the preview before you apply: a light fill on a light shape is text that disappears, and the window is the only place that shows it before you press.

Text Fill

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Sets the colour of the text inside a shape, and how transparent it is. It is a different axis from the shape's own fill: the text is what falls on top of it.

  1. Click the shape whose text you want to colour.
  2. Click Text Fill: a window opens showing your text on your shape, at its real proportions.
  3. Pick a colour from the palette, or click More Colours to choose any colour at all.
  4. Drag the Transparency slider to let the shape show through the letters.
  5. If the window remarks that the text barely stands out, pick a colour further from the shape's fill.
  6. Click Apply. To leave the letters unpainted — an outline-only look — click No Fill instead.

Tip The command is available only when the shape already has text: without letters there is nothing to colour. Type into the shape first, then colour it.

Text Outline

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape
  1. Click the shape whose text you want to outline.
  2. Click Text Outline: a window opens showing the outline on the shape's own text, in its own font and size.
  3. Choose the colour, the weight and the dash pattern. The preview follows every choice, and a note appears when the weight starts to close up the smallest text in the shape.
  4. Click Apply to write all three as a single change, or No Outline to remove the outline.

Text Effects

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Adds a shadow, a reflection or a glow to the text inside a shape. The three are independent: text can carry a shadow and a glow at the same time, and switching one off leaves the others alone.

  1. Click the shape whose text you want to decorate.
  2. Click Text Effects: a window opens showing the shape's own text, inside the shape, at the size it has in the document.
  3. For the shadow, click the square that shows the direction you want it to fall in; the centre square means no shadow. Then set how transparent, how blurred and how far it is.
  4. For the reflection, choose how much of the mirrored copy stays visible, then set its transparency, blur and distance. For the glow, pick a tint and a radius.
  5. Click Apply to write all three as a single change, or Remove all effects to clear them. Text fill and text outline are left exactly as they are — they have their own commands.
  6. Watch the line under the preview: it appears when an effect grows past the size of the smallest text in the shape.

Tip Effects are measured in points against the size of the letters, not against the shape: the same 3 pt shadow is a soft edge under a 60 pt heading and a second copy of the word under 9 pt text. That is why the note reads the smallest text in the shape, which a single preview cannot show.

Alt Text

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape
  • Shortcut menu

Stores a short written description of the shape for people who cannot see it. The window draws the shape next to the box you describe it in, over the colour it sits on in the document, and lets you mark it as decorative instead — something a screen reader should skip.

  1. Click the shape you want to describe.
  2. Click Alt Text.
  3. Look at the drawing on the left: it is the shape as it stands in the document, with its fill, its outline, its effects and the way it is turned.
  4. Type a description in the large box. A line underneath points out anything worth fixing, and the counter shows how far you are from the recommended length.
  5. For a shape that carries no meaning — a divider, a frame, a flourish — tick Mark as decorative instead: screen readers skip it and no description is needed.
  6. Choose OK to store your choice with the shape.

Tip Describe what the shape means here, not what it looks like: an arrow between two boxes is not “an arrow”, it is “leads to”. A shape whose only job is to hold text needs no description of its own — the text is already read out.

Bring Forward

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Moves the shape up through the stack of overlapping objects, one step at a time or all the way to the front.

  1. Click the shape you want to move up.
  2. Click Bring Forward.
  3. To send it all the way to the front instead, click the arrow next to Bring Forward and choose Bring to Front.
  4. Check what is now covered by the shape.

Tip When several objects overlap, moving one forward always moves it *relative to the others*: the result depends on where they were, not only on where this one was. To see the whole stack at once, choose Reorder Objects from the arrow: it lists every object from front to back and shows which one covers which.

Send Backward

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Moves the shape down through the stack of overlapping objects, one step at a time or all the way to the back.

  1. Click the shape you want to move down.
  2. Click Send Backward.
  3. To send it all the way to the back instead, click the arrow next to Send Backward and choose Send to Back.
  4. Check the shape is still findable — an object sent behind an opaque one can no longer be clicked.

Tip A shape sent to the back of an opaque object is still there: use the selection order, not the pointer, to get it back. To see the whole stack at once, choose Reorder Objects from the arrow: it lists every object from front to back and shows which one covers which.

Selection pane

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Opens a side pane listing every object on the document — shapes, pictures, charts. Click a row to select that object, use the eye to hide it, and rename it so one shape can be told from another. It is the only way to reach a shape buried under another one, or one you have already hidden.

  1. Click Selection.
  2. Click a row in the pane to select that object on the page.
  3. Double-click a row, or click Rename at the foot of the pane, to give the object a name of its own.
  4. Click the eye at the end of a row to hide or show that object.
  5. Use Show all or Hide all at the foot of the pane to act on every object at once.

Tip A shape you draw arrives without a name, so the pane calls it Shape 1, Shape 2 — numbers that shift as soon as you add another one. Name the shapes of a diagram once and the list stays readable for good.

Align

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Puts the selected shape against an edge of the margin or of the page, or centres it there. Choosing the frame is half the command: aligning to the page and aligning to the margin differ by the width of the margin, and the window shows you which one you are aiming at.

  1. Click the shape you want to move.
  2. Click Align. The window opens and nothing has moved yet.
  3. Under “Relative to”, pick Margin (the area the text flows in) or Page (the whole sheet).
  4. Pick a Horizontal alignment, a Vertical one, or both — each axis can be left Unchanged, which is how you move a shape sideways without pulling it away from its paragraph.
  5. Watch the preview: the dashed rectangle is the frame, and the solid one is where the shape will land. If the shape belongs to a group, the window says so, and the frame shown is the whole group's.
  6. Click Align. Both axes are applied together, so one undo puts everything back.

Tip A shape that belongs to a group is aligned by the group's frame, not by its own — the window says so before you apply. The arrow next to Align still holds the six quick alignments, always relative to the margin.

Group

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Ties a shape to the other objects on its page, so they move, align and are deleted as one. The window is where you say which objects belong together, and the frame drawn on the map shows the shape the group will have before you make it. The same list holds the pictures on that page, so a shape and a picture can end up in one group.

  1. Click the shape you want to group.
  2. Click Group. The window opens on the objects of that page; the shape you started from is already in the group and has no check box.
  3. Tick every object that belongs with it, in the list or straight on the map. The frame grows to show what the group will cover.
  4. Read the sentence above the buttons: it says how many objects the group will hold.
  5. Click Group. From now on, moving, aligning or deleting any member moves, aligns or deletes them all, in a single undo.
  6. Use the arrow next to Group for Ungroup, or for Regroup to bring back the last group you took apart.

Tip It is the same group you compose starting from a picture: whichever object you start from, the window lists every object on that page. Each member keeps its own shape commands, so you can still restyle, fill or turn a single shape without leaving the group.

Rotate

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Opens a window where you turn the shape by dragging a dial and read the angle in degrees as you go — any angle, not only quarter turns — and where you can flip it to its mirror image. The arrow next to the button keeps the four quick ways.

  1. Click the shape you want to turn.
  2. Click Rotate.
  3. Drag the dial to the angle you want, or use − and + to step one degree at a time.
  4. Use the quarter-turn buttons for an exact 90° or 180°, and Flip to mirror the shape.
  5. Click Rotate to apply, or Straighten to bring it back upright.

Tip Flipping an arrow is not the same as rotating it twice: a flip mirrors the shape, and any text inside it stays the right way round.

Crop Shape

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Trims the selected shape down to a rectangle you draw over it. Whatever falls outside the rectangle is removed, and the shape's frame shrinks to the rectangle — so what is left keeps the same size on the page.

  1. Click the shape you want to crop.
  2. Click Crop.
  3. Drag a corner or edge handle to set the rectangle, or drag inside it to move it.
  4. If you like, pick a proportion on the right to keep the rectangle square, 4:3, 16:9 and so on.
  5. Click Crop to apply, or Whole shape to start over.

Tip Cropping a shape is not the same as cropping a picture: a picture only hides the part you cut away, a shape loses it. The window shows the shape whole, with the part you are removing under a veil, because that is the only chance to change your mind — afterwards only Ctrl+Z brings it back.

Height

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Sets how tall the selected shape is on the page. The Shape Size window shows the width and the height together and draws the shape at the size you are choosing, so you can see what a measurement costs before you apply it.

  1. Click the shape you want to resize.
  2. Click Height: the Shape Size window opens with the cursor in the Height box.
  3. Type the value you want and press Tab: the drawing on the left redraws at the new size.
  4. Tick Lock aspect ratio if you want the other side to follow, so the shape keeps its proportion.
  5. Click Apply.

Tip Watch the drawing, not only the numbers: the outline of a shape depends on its frame, so a star squeezed into a narrow box stops looking like a star. There are no scale boxes here as there are for a picture, because a shape has no original size for a percentage to refer to.

Width

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Sets how wide the selected shape is on the page. It opens the same Shape Size window as Height, with the cursor in the Width box: a width on its own is not a choice, because whether the height follows depends on Lock aspect ratio — which sits right next to the two numbers.

  1. Click the shape you want to resize.
  2. Click Width: the Shape Size window opens with the cursor in the Width box.
  3. Type the value you want and press Tab: the drawing on the left redraws at the new size.
  4. Tick Lock aspect ratio if you want the height to follow.
  5. Click Apply.

Tip The preview draws the width the page allows as a frame: if the shape sticks out of it, it will stick out on the page too. Lock aspect ratio starts off for a shape — stretching a rectangle into a banner is an ordinary thing to do, unlike squashing a photograph.

Edit Icon

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Puts a different icon in place of the one you selected, keeping the frame it occupies. The window shows the icon that is there now next to the one you are choosing, and draws both in the proportions of the frame they occupy in your document — so what you see in the window is what you get on the page. Icons are grouped by category, the same categories as the Insert gallery they come from.

  1. Click the icon in your document you want to change.
  2. Click Edit Icon.
  3. Type part of an icon's name in the search box at the top of the catalogue to narrow it down, or scroll the catalogue on the right. Hovering a tile shows its name.
  4. Click the icon you want: it appears beside the current one, in the frame it will occupy.
  5. Click Apply.

Tip The frame does not move: the new icon takes exactly the space the old one had, so nothing around it shifts. To change how big it is, use Height and Width.

Edit Text

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Writes the label that goes beside the icon — the word the icon stands for — and chooses on which of its four sides it sits. The window draws the icon with the label as it will look on the page, at the real proportions and on your document's background, so you can see straight away whether the word is too long for the picture or breaks in an awkward place. The label belongs to the drawing: it moves with the icon and it prints with it.

  1. Click the icon in your document.
  2. Click Edit Text.
  3. Type the label. The preview redraws as you type.
  4. Choose where it sits: below, above, left or right.
  5. Click Apply.

Tip The icon keeps its size: the drawing grows to make room for the label, so nothing you had sized changes. Clear the text and apply to remove the label — the drawing goes back exactly to the icon it was. The label is not the alternative text: that one is read aloud to people who cannot see the icon, and you write it with Alt Text.

Combine Icons

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Turns this icon and one or more icons from the catalogue into a single icon. You arrange them inside the frame the icon already occupies - drag one to move it, drag its corners to resize it — and choose how they combine: Union keeps everything they cover, Combine turns the overlaps into holes, Intersect keeps only what all of them cover, and Subtract removes the others from the one you started from. The window draws the result while you compose it, so you never have to apply it to find out what it looks like.

  1. Click the icon in your document you want to combine.
  2. Click Combine Icons.
  3. Scroll the catalogue on the right and click an icon to add it: it lands on the stage, smaller and centred, over the one you started from.
  4. Drag it to move it, or drag a corner handle to resize it, until the two overlap the way you want.
  5. Pick one of the four operations below the stage and watch the preview change.
  6. Click Combine.

Tip The frame does not move: the combined icon takes exactly the space the old one had. If the preview goes empty, the icons do not overlap enough for the operation you picked — the line above the buttons says so, and Combine stays off until there is something to produce. You can combine up to six icons at a time, and a single undo brings back the icon you started from.

Quick Styles

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Recolours the icon: the fill of its strokes and the outline around them, chosen together from a gallery that draws every tile on your own icon. Thirty-six tiles - six families down, six theme accents across - and the two families at the top have no fill at all, which does not merely change the colour of the pictogram: it turns it into line art. Below the gallery the same two axes are there on their own, so you can step away from a tile by one notch and watch the icon while you do it.

  1. Click the icon in your document.
  2. Click Quick Styles.
  3. Look at the preview on the left: it is your icon, at the size it currently has, on the colour it sits on.
  4. Click a tile to apply it. The row picks the look, the column picks the theme accent.
  5. To step away from the tile, pick another fill or outline colour, or drag the Weight slider.
  6. Click Apply.

Tip The outline scales with the icon: it is kept as a share of the icon's own size, so the same icon looks the same at any size, and enlarging it does not leave a hairline behind. Reset puts the icon back to the look it had before it was first recoloured - black without an outline for an icon from the catalogue, its own colour for one that came from another file, even after the file has been saved and reopened - and not to nothing: if you take away both the fill and the outline yourself, a line under the preview warns you the icon will not be visible. Quick Styles stays greyed out on a drawing this window cannot rewrite in full, such as one that already carries several colours.

Icon Fill

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Sets the colour of the inside of the icon — the pictogram itself, not a frame around it. The window shows the icon at the size it has in your document and, above all, on the colour it actually sits on, because a colour for a pictogram has no quality of its own: it only has one against what is behind it. The palette is the same one the Quick Styles gallery offers, so a colour you can reach from one you can reach from the other, and the first cell means no fill at all — a hollow icon, which is still a drawing as long as an outline traces it. The outline is left exactly as it is: it has its own command.

  1. Click the icon in your document.
  2. Click Icon Fill.
  3. Pick a colour, or the first cell to leave the icon hollow.
  4. The arrow keys move the choice one cell at a time, and up or down a whole row.
  5. Read the line under the preview: it tells you whether the colour you picked will actually show.
  6. Click Apply.

Tip The line under the preview is a measurement, not an opinion: it compares your colour with the paper behind the icon and reports the contrast ratio. Below 3:1 an icon is hard to make out — that is the minimum the accessibility standard asks for a graphic (WCAG 2.1, Non-text Contrast). It is a note and never a block: you can apply whatever you like. A second reading appears when the fill gets too close to the outline the icon carries, because at that point the outline you chose in the other window stops being visible. And if you take the fill away from an icon that has no outline, nothing is left to draw at all — the window says so. Icon Fill stays greyed out on a drawing the window cannot rewrite in full, one that already carries several colours for instance.

Icon Outline

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Sets the colour and the thickness of the line that runs around the icon's shapes. The window shows the icon itself, at the size it has in your document and on the paper it sits on, because an outline is only ever as good as what is behind it: a pale line on a pale icon is a line nobody sees. The palette is the same one the Quick Styles gallery offers, so a colour you can reach from one you can reach from the other, and the first cell means no outline at all. The fill is left exactly as it is — it has its own command — but you can see it, because it is half of what you are judging.

  1. Click the icon in your document.
  2. Click Icon Outline.
  3. Pick a colour, or the first cell if you want no outline at all.
  4. Drag the Weight slider; the arrow keys nudge it one step at a time.
  5. Watch the mark on the slider: past it, this icon's strokes start to touch.
  6. Click Apply.

Tip The small mark on the weight slider is measured on your icon, not guessed: it is the width at which this particular drawing closes up — where a hole fills in, or two separate parts weld into one. A solid, compact drawing never closes, and then there is no mark at all. You can go past it: the slider does not stop, a line under the preview simply tells you, with the number. The outline scales with the icon, so the same icon looks the same at any size and enlarging it does not leave a hairline. Icon Outline stays greyed out on a drawing the window cannot rewrite in full — one that already carries several colours, for instance.

Icon Effects

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Puts a shadow, a glow or a reflection on the icon. All three fall on the pictogram itself, not on the rectangle of empty space around it: a shadow follows the drawing's own outline, and a glow surrounds its strokes. The three are independent, so an icon can carry a shadow and a glow at the same time, and switching one off leaves the others alone. The window draws your own icon, at the size it has in the document and on the colour it sits on, so what you see is what the page and the printed copy will show.

  1. Click the icon in your document.
  2. Click Icon Effects.
  3. For the shadow, click the square that shows the direction you want it to fall in; the centre square means no shadow. Then set how transparent, how blurred and how far away it is.
  4. For the glow, pick a tint, then set its size and how transparent it is. The first swatch, the one crossed through, removes the glow.
  5. For the reflection, choose Reflected, then set how transparent, how blurred and how far below the icon it sits.
  6. Watch the preview on the left while you drag: it is your icon with the real effects on it.
  7. Click Apply to write all three as a single change, or Remove all effects to clear them.

Tip Effects are measured in points, and an icon is mostly empty space: what you are really covering is the thickness of its strokes, which on a normal icon is only a few points. That is why the sliders start smaller here than for a photograph, and why a line under the preview warns you when a glow is wide enough to close the gaps in the drawing, or a shadow far enough to read as a second copy of it. The warning never stops you — it is a note, not a rule. Icon Effects does not change the drawing itself: removing them puts the icon back exactly as it was, and the same icon file stays in the document.

Reset Icon

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Puts the icon back the way it was. The window shows the icon twice, side by side and at the same scale — as it is now, and as it would be after restoring — with one line for each thing that has actually changed: its size, the way it has been turned, the colour of the pictogram itself, and any border or frame it carries. Every line starts ticked, so restoring everything is a single click; untick the ones you want to keep. The size it goes back to is the icon's own natural size, the one it had when it was first inserted: it is not remembered but worked out from the icon itself, so it is right even after you have swapped the icon or combined it with another. The colour goes back to the one the icon had before it was recoloured — a recoloured icon carries its original with it, even after saving and reopening, so an icon from the catalogue goes back to black and one that arrived blue from another file goes back to blue — and that is the same place the Reset button inside Quick Styles takes it, so the two can never disagree. An icon that was never recoloured here, or one drawn in several colours, has no colour to go back to, and that line is simply not there.

  1. Click the icon in your document.
  2. Click Reset Icon.
  3. Compare the two previews: Now on the left, After restoring on the right.
  4. Untick any line you want to keep — Size, for example, if you resized the icon on purpose.
  5. Check the preview on the right: if you had recoloured the icon, the pictogram is shown back in black.
  6. Click Restore.

Tip The command stays greyed out while the icon has nothing to restore, so a greyed Reset Icon means the icon is already the way it came in. Nothing you have written is touched: the icon's label and its alt text are content, not formatting, and Reset Icon never removes them. A single undo brings everything back at once, however many lines you ticked — including the colour, which lives in the icon's own drawing rather than in the document. The pictogram's colour counts as something to restore, so after a Quick Style or an Icon Outline the command lights up for it too.

WordArt Styles

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Chooses how the letters of the icon's **label** look — the word beside it on the page, not the pictogram. The pictogram has its own commands (Quick Styles, Icon Fill, Icon Outline, Icon Effects); this one dresses the word. The dialog shows thirty ready-made styles — five families across six colours — and below them the five axes for stepping away from one: text fill, outline and its weight, shadow direction, reflection extent, glow tint and radius. The preview is not a lookalike drawing: it is the real icon with its real label, in the position it has in the document and on the page colour, drawn by the same engine that draws them on the page. Applying writes the style as a single history entry, so one Ctrl+Z removes all of it. The drawing does not change size, because a style does not move where the letters wrap.

  1. Click the icon in the document.
  2. If the icon has no label yet, write one first with Edit Text. Without a label the WordArt Styles command stays greyed out, because there are no letters to dress.
  3. Click WordArt Styles.
  4. Pick one of the thirty styles: each row is a look, each column a colour.
  5. Adjust the axes below the gallery to step away from the style you picked.
  6. Watch the preview on the left: it shows the label as it will sit beside the icon.
  7. Click Apply. Remove style returns the label to plain letters.

Tip The preview background is the page's own paper, and that matters: half of the ready-made styles have a light fill, which on white paper is nearly invisible text. Seeing the style against the real background before you commit is exactly what the dialog is for. Changing the label text later with Edit Text does not remove the style — fixing a typo does not strip the word. Removing the label entirely does remove the style, because nothing is left to dress.

Text Fill (icon)

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Sets the colour of the icon's label: the word beside it, the one written with Edit Text. It does not colour letters inside the pictogram, because an icon has no text inside it. The window shows the icon with its label at true proportions and over the paper it actually sits on, because a colour for a word has no quality of its own: it has one relative to what the word falls on. The palette is the same one used to colour the text of a shape, because a label is text. Beside the colours there is Automatic, which is not black: it means the colour the document gives its own text, and it changes with it.

  1. Click the icon in the document.
  2. Click Text Fill.
  3. Choose a colour, or More Colours to compose one.
  4. Arrow keys move the choice by one cell, and vertically by a whole row.
  5. Read the line below the preview: it says whether the label will really be readable.
  6. Click Apply.

Tip The line below the preview is a measurement, not an opinion: it compares the chosen colour with the paper the label falls on and reports the contrast ratio. Below 4.5:1 text of that size is hard to read — it is the minimum the accessibility standard asks for small text (WCAG 2.1, Contrast Minimum). It is a note and never a ban. The threshold is higher than Icon Fill's 3:1: that is not an inconsistency, they are two different criteria — there a drawing is measured, here letters are. Text Fill stays greyed out on an icon without a label, because there would be nothing to colour: write the label first with Edit Text. And changing the word later does not change its colour: they are two distinct commands.

Text Outline (icon)

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Draws an outline around the letters of the icon's label — the word beside it, the one written with Edit Text — and sets its colour, weight and dashes. It does not outline the strokes of the pictogram: those have Icon Outline. It is the same window used to outline the text of a shape, opened on the label: the three settings combine, so choosing a dash pattern does not mean giving up the colour. The preview shows two things at once, at two different distances: above, the word magnified, where you see how the stroke runs along the letters; below, the icon with its own label at the size it will really have on the page.

  1. Click the icon in the document.
  2. Click Text Outline.
  3. Choose a colour, or More Colours to compose one.
  4. Choose one of the weights in the row, or drag the slider for a value in between.
  5. Choose a dash pattern, if you want one.
  6. Look at both preview panes and read the line below them.
  7. Click Apply; No Outline removes the outline.

Tip The stroke is centred on the letter shapes, so half of it grows inwards: past a certain weight the counters — the gaps inside a, e, o, g — close up and the word turns into a blot. The line below the preview says so when it happens; it is a note and never a ban. A label is always 11 points, so a few tenths of a point are enough: on a large heading the same weight would be a hairline. The lower pane exists for exactly this — it shows the word at its true size, which the magnified one cannot. Text Outline stays greyed out on an icon without a label: write the label first with Edit Text. And do not confuse it with Icon Outline, which draws the border of the pictogram itself.

Text Effects (icon)

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Sets a shadow, a reflection and a glow on the letters of the icon's label — the word beside it, the one written with Edit Text. It does not decorate the strokes of the pictogram: those have Icon Effects. It is the same window used to decorate the letters of a shape, opened on the label: the three effects combine, so switching on a glow does not switch off the shadow. The preview shows two things at once, for two different questions: above, the word magnified, where you see what the effect looks like; below, the icon with its own label at its true size, where you see where the effect lands.

  1. Click the icon in the document.
  2. Click Text Effects.
  3. For the shadow, pick a direction in the grid; the middle cell removes it.
  4. For the reflection, pick how far it extends; None removes it.
  5. For the glow, pick a colour; the first swatch removes it.
  6. Adjust transparency, blur, distance and radius with the sliders.
  7. Look at both preview panes and read the line below them.
  8. Click Apply; Remove All Effects clears all three.

Tip An effect reaches outside the word, and an icon's label has a neighbour: the pictogram, a sixteenth of an inch away. A slightly wide glow reaches it, and a reflection touches it when the label sits above the icon. That is not a mistake — sometimes it is exactly the effect you want — but you cannot see it in the magnified word, which shows only the word: the lower pane is what tells you, and that is why it shrinks as the glow grows, so it can show it whole. A label is always 11 points, so a shadow offset by a few points already reads as a second copy of the word; the line below the preview says so when it happens, and it is a note and never a ban. Text Effects leaves the colour and the outline of the letters alone: those have Text Fill and Text Outline. It stays greyed out on an icon without a label: write the label first with Edit Text. And do not confuse it with Icon Effects, which decorates the pictogram itself.

Alt text

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon
  • Shortcut menu

Writes the sentence that reaches anyone who cannot see the icon: a screen reader reads it in place of the symbol. An icon almost always stands in for a word, so what goes here is what it means, not what it looks like.

  1. Click the icon in your document you want to describe.
  2. Click Alt text.
  3. Type one or two sentences saying what the icon tells the reader.
  4. Click OK.

Tip Describe the meaning, not the drawing: a padlock beside a price is “secure payment”, not “a padlock”.

Bring forward

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Moves the icon one step up the stack of overlapping objects, or straight to the top. The arrow beside the button opens the list with both, plus the window that shows the whole stack at once.

  1. Click the icon in your document you want to move up.
  2. Click the arrow beside Bring forward.
  3. Choose Bring forward for one step, or Bring to front to put it above everything.
  4. Choose Reorder objects… to see the whole stack and drag the icon into place.

Tip When the icon is already on top there is nothing to raise it above, and the two entries that would do it are switched off rather than doing nothing.

Send backward

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Moves the icon one step down the stack of overlapping objects, or all the way to the back. The arrow beside the button opens the list with both, plus the window that shows the whole stack at once.

  1. Click the icon in your document you want to move down.
  2. Click the arrow beside Send backward.
  3. Choose Send backward for one step, or Send to back to put it under everything.
  4. Choose Reorder objects… to see the whole stack and drag the icon into place.

Tip Sending an icon behind a filled shape hides it completely: reach it again from the Selection pane, which lists what the pointer can no longer find.

Selection pane

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Opens the side panel that lists every object on the page, so you can reach one the pointer cannot — an icon buried behind a picture, or one that has been sent to the back.

  1. Click Selection pane.
  2. Click a name in the list to select that object.
  3. Double-click a name to rename it.
  4. Click the eye beside a name to hide that object without deleting it.

Tip Renaming is what makes the list usable: “Icon 7” tells you nothing next month, “download icon” does.

Align

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Lines the icon up against a reference — a margin, the page, or the other objects you have selected — instead of nudging it by eye.

  1. Click the icon in your document you want to line up.
  2. Click Align.
  3. Choose what to align to, then the edge or the centre you want.
  4. Click Align.

Tip Aligning a row of icons to their centres makes them read as one band, which nudging never quite achieves.

Group

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Ties the icon to the other objects you choose, so they move, align and are deleted as one. A group is a relationship and not a container: each icon keeps its own commands and its own settings.

  1. Click the icon in your document you want to put in a group.
  2. Click Group.
  3. Tick the objects that go in — the map shows the frame the group will have, growing as you tick.
  4. Click Group.

Tip Taking a group apart remembers it: Regroup brings back the last one you undid, so you can try a layout without losing it.

Rotate

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Opens a window where you turn the icon by dragging a dial and read the angle in degrees as you go — any angle, not only quarter turns — and where you can flip it to its mirror image.

  1. Click the icon in your document you want to turn.
  2. Click Rotate.
  3. Drag the dial to the angle you want, or use − and + to step one degree at a time.
  4. Use the quarter-turn buttons for an exact 90° or 180°, and Flip to mirror the icon.
  5. Click Rotate to apply, or Straighten to bring it back upright.

Tip Flipping an arrow icon is not the same as rotating it twice: a flip mirrors the symbol, so a left arrow becomes a right one.

Crop

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Keeps only the part of the icon inside a rectangle you choose. Crop opens a window showing the whole icon, with the part you are cutting away dimmed rather than hidden — so putting a piece back is as easy as taking it off. The icon is never squashed: the frame follows the crop, so what stays keeps the size it had on the page. Nothing is thrown away — Remove crop, in the same window, brings the whole icon back.

  1. Click the icon in your document.
  2. Click Crop.
  3. Drag inside the crop window to move it, or drag a corner or edge handle to resize it.
  4. To cut to a set shape, pick one under Proportions — Square, 4:3, 16:9 and the others apply straight away.
  5. Click Crop to apply. Remove crop puts the whole icon back, frame and all.

Tip Cropping does not redraw the icon: it chooses which part of it you are looking at, and you can change your mind at any time. That is what makes it different from Combine icons, which really does cut the drawing. And whatever you keep stays sharp at any size, because an icon is redrawn from its outline rather than enlarged — which is also why the window shows only the icon's name where a photograph would show a pixel count. An icon has no pixels to count.

Height

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Opens the size window with the keyboard already on the height box. An icon is drawn from its outline, so it stays sharp at whatever size you give it — there is no resolution to lose.

  1. Click the icon in your document you want to resize.
  2. Click Height.
  3. Type the height you want.
  4. Leave the aspect-ratio lock on to keep the symbol's proportions, or turn it off to stretch it.
  5. Click OK.

Tip Unlike a photograph, an icon never goes soft when you enlarge it: it is redrawn at the new size, not scaled up.

Width

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Opens the size window with the keyboard already on the width box — the same window that Height opens, because a width chosen without knowing whether the proportions are locked is not yet a choice.

  1. Click the icon in your document you want to resize.
  2. Click Width.
  3. Type the width you want.
  4. Leave the aspect-ratio lock on to keep the symbol's proportions, or turn it off to stretch it.
  5. Click OK.

Tip Turning the lock off squashes the symbol: a stretched icon reads as a mistake far sooner than a stretched photograph does.

3D Model Views

Where to find it
  • Object › Illustrations › 3D Model
  • Pane › 3D Model

Chooses which of fourteen directions the model is seen from — six faces and eight corners.

  1. Select the model.
  2. Click 3D Model Views: the gallery opens with fourteen tiles.
  3. Each tile draws your model seen from that direction, so you choose by looking and not by name.
  4. The tile of the current view is highlighted; a model turned freely elsewhere highlights none.
  5. Click a tile to apply that view, in a single undo step.

Reset 3D Model

Where to find it
  • Object › Illustrations › 3D Model
  • Pane › 3D Model

Brings the model back to the view it came in with.

  1. Select the model.
  2. Click Reset 3D Model.
  3. The view goes back to the one the model was inserted with; size and position stay as you left them.

Alt Text

Where to find it
  • Object › Illustrations › 3D Model
  • Pane › 3D Model
  • Shortcut menu

Writes the description that reaches whoever cannot see the model.

  1. Select the model.
  2. Click Alt Text.
  3. Type one or two sentences saying what the object shows.
  4. The window flags a description that is too short or that opens with a filler phrase; the advice never blocks you.
  5. Click OK: the description travels with the file.

Text Pane

Where to find it
  • Object › Illustrations › SmartArt
  • Pane › SmartArt
  • Shortcut menu

Opens the pane where the diagram's entries are written. Each line is one shape in the graphic and its indent is its level, so the whole diagram is edited as an outline instead of shape by shape.

  1. Click the diagram.
  2. Click Text Pane.
  3. Type one entry per line; press Enter for a new line and Tab to make it a sub-entry.
  4. Use Promote and Demote to change a line's level, Move Up and Move Down to reorder.
  5. Pick another layout from the gallery at the top if you want a different kind of diagram.
  6. Click OK — the diagram is redrawn with the new text.

Tip The colours stay as you set them: correcting a word does not undo a Change Colors.

Change Layout

Where to find it
  • Object › Illustrations › SmartArt
  • Pane › SmartArt
  • Shortcut menu

Lays the same entries out as a different kind of diagram — a list becomes a process, a process becomes a cycle — without retyping anything. The text and the colours are kept.

  1. Click the diagram you want to lay out differently.
  2. Click Change Layout.
  3. Choose a layout from the list — the diagram is redrawn straight away.
  4. If it is not what you wanted, press Ctrl+Z or pick another one.

Tip The frame keeps the size you gave it: the diagram is laid out again inside it, so the text around it does not move.

Change Colors

Where to find it
  • Object › Illustrations › SmartArt
  • Pane › SmartArt
  • Shortcut menu

Recolours the diagram with the colours of the document theme: either the whole run of accents, or a single accent for a quieter, one-colour graphic.

  1. Click the diagram you want to recolour.
  2. Click Change Colors.
  3. Choose Colorful to cycle through all six accents, or a single accent swatch for a one-colour diagram.
  4. The diagram is recoloured straight away.

Tip The swatches show the accents of this document's theme, so what you see in the list is what the diagram will look like.

Reset Graphic

Where to find it
  • Object › Illustrations › SmartArt
  • Pane › SmartArt
  • Shortcut menu

Puts the diagram's colours back to the default of the document theme, leaving its text, its structure and its layout untouched.

  1. Click the diagram you want to reset.
  2. Click Reset Graphic.
  3. The diagram goes back to the default colours.

Tip Only the colours are reset. What you typed and the layout you chose stay as they are — press Ctrl+Z if you want to undo more than that.

Back to the guide

Productivity, made in Italy.

Bring the whole suite to your team — simple, secure and entirely yours.