Teatrys guide

View

The step-by-step guide to every command in the View menu of Teatrys.

Normal

Where to find it
  • View › Views

Goes back to ordinary editing, one slide at a time. This is the view most of the work happens in.

  1. Click Normal.
  2. The slide you were on fills the stage again.
  3. Click into a placeholder and carry on editing.

Tip Normal is also the way out of a master view: it closes the master and shows the slides again. A presentation reopens in the view it was saved in, as in PowerPoint.

Outline View

Where to find it
  • View › Views

Shows the deck as headings and their levels, with no pictures or layout in the way. Use it to get the argument in order before you dress the slides.

  1. Click Outline View.
  2. Read the deck as a list of headings and their levels.
  3. Edit the wording, or change the level of a heading.
  4. Click Normal when you want the slides back.

Tip The outline is the same deck seen another way, so a change made here is a change to the slides.

Slide Sorter

Where to find it
  • View › Views

Shows every slide as a thumbnail on one screen. The quickest way to see the shape of the deck and put it in order.

  1. Click Slide Sorter.
  2. Look the deck over as a grid of thumbnails.
  3. Drag a slide to the position you want it in.
  4. Click Normal to go back to editing one slide.

Tip Reordering is easier here than in the slide list, because far more of the deck is on screen at once.

Notes Page

Where to find it
  • View › Views

Shows the slide with its notes the way it prints: the slide at the top and the notes below, on one page. The notes are written on the page itself, with all the room they need.

  1. Click Notes Page.
  2. Click below the slide and type the notes for that slide.
  3. Use the mouse wheel, or Page Down and Page Up, to move to the page of the next or previous slide.
  4. Double-click the slide, or click Normal, to go back to editing the slide.

Tip These are the same notes as in the Notes pane of Normal view, so a change in one shows in the other. The page is the one you get by choosing Notes Pages when you print.

Reading View

Where to find it
  • View › Views

Plays the presentation in the app window instead of full screen, with a status bar to move between slides. Useful to review a deck, or to watch its animations and transitions, while keeping the rest of the screen.

  1. Click Reading View: the presentation starts from the first slide.
  2. Click the slide, or use Next and Previous in the status bar, to move through it.
  3. Open Menu in the status bar to see all slides, zoom in, edit the slide you are looking at, or go full screen.
  4. Press Esc to go back to the view and the slide you started from.

Tip To start from the slide you are looking at instead of the first one, choose Reading View from Current Slide.

Slide Master

Where to find it
  • View › Master Views

Opens the master every slide follows, so a change to the look is made once instead of slide by slide.

  1. Click Slide Master.
  2. Change the placeholders, the background or the fonts on the master.
  3. Click Normal to close the master.
  4. Check a few slides to see the change carried through.

Tip If only one slide has to look different, change that slide instead: what you do here reaches all of them.

Handout Master

Where to find it
  • View › Master Views

Opens the master behind the printed handouts, where several slides share a page. Set here how that page looks.

  1. Click Handout Master.
  2. Set how the handout page should look.
  3. Click Normal to close the master.
  4. Export a handout to check the result.

Tip This master governs the printed handout only: the slides on screen and in the show are untouched.

Notes Master

Where to find it
  • View › Master Views

Opens the master behind the printed notes pages, the ones that carry a slide with your notes below it.

  1. Click Notes Master.
  2. Set how the notes page should look.
  3. Click Normal to close the master.
  4. Print the notes to check the result.

Tip This changes the page the notes are printed on, never the notes you have written.

Notes

Where to find it
  • View › Show

Shows or hides the notes pane below the slide, where you write the notes only the speaker sees. The pane belongs to Normal view, and the presentation remembers whether it was open.

  1. Click Notes.
  2. The notes pane disappears and the slide takes the space it leaves.
  3. Click Notes again to bring the pane back at the height it had.

Tip The command works only in Normal view. The presentation reopens with the pane as you left it, in PowerPoint too, and hiding it does not count as a change to save.

Ruler

Where to find it
  • View › Show

Shows the ruler along the edge of the stage, where the margins and tab stops of the text are set.

  1. Click Ruler.
  2. Use the ruler to set the margins and tab stops of the text you are editing.
  3. Click Ruler again to hide it.

Tip Hide the ruler again when you want every bit of the stage for the slide itself.

Gridlines

Where to find it
  • View › Show › Grid and Guides

Draws the guide grid over the slide, so you can judge sizes and line objects up by eye.

  1. Click Gridlines.
  2. Use the grid to line the objects on the slide up with each other.
  3. Click Gridlines again to hide the grid.

Tip The button stays pressed while the grid is shown, so you can tell at a glance whether it is on.

Guides

Where to find it
  • View › Show › Grid and Guides

Shows the lines you align objects to, so the same element sits in the same place from slide to slide.

  1. Click Guides.
  2. Drag your objects until they meet the lines.
  3. Click Guides again to hide them.

Tip Guides and Gridlines are separate switches: turn on whichever helps and leave the other off.

Snap to Grid

Where to find it
  • View › Show › Grid and Guides

Makes objects catch on the grid as you drag them, so a row of boxes ends up aligned without measuring.

  1. Click Snap to Grid.
  2. Drag an object on the slide and let it settle on the nearest grid position.
  3. Click Snap to Grid again to turn the catching off.

Tip Turn it off when an object has to sit at an exact spot between two grid lines.

Grid and Guides

Where to find it
  • View › Show › Grid and Guides

Sets the grid and the guides objects snap to - how close together they sit and which of them are used.

  1. Click Grid Settings.
  2. A dialog opens where you set the grid and the guides.
  3. Set the options you want.
  4. Confirm to apply them.

Tip Come here when the grid is too coarse or too fine for the placing you need; Gridlines and Guides only turn the aids on and off.

Color

Where to find it
  • View › Show › Color

Shows the deck in full colour. This is the everyday setting, and the one to come back to after previewing in grey.

  1. Click Color.
  2. The stage, the thumbnails and the sorter are all shown in full colour again.
  3. Carry on editing.

Tip Color, Grayscale and Black and White are alternatives: choosing one turns the other two off.

Grayscale

Where to find it
  • View › Show › Color

Previews the deck in shades of grey, which is how it will read on a printout without colour.

  1. Click Grayscale.
  2. Check that each slide still reads once the colours are gone.
  3. Click Color to go back to full colour.

Tip Two colours that differ in hue but not in lightness collapse into the same grey - this is where you catch that.

Black and White

Where to find it
  • View › Show › Color

Previews the deck in pure black and white, the harshest test of whether a slide still reads without colour.

  1. Click Black and White.
  2. Check which parts of the slide survive without the greys.
  3. Click Color to go back to full colour.

Tip Nothing on the slide is changed: this is a way of looking at the deck, not a way of recolouring it.

Zoom

Where to find it
  • View › Zoom and Window

Chooses how big the slide is shown on screen. Zoom in for fine work on a small object, out to judge the slide as a whole.

  1. Click Zoom.
  2. A dialog opens where you choose how big the slide is shown.
  3. Choose the level you want and confirm.
  4. Click Fit to Window to get the whole slide back on screen.

Tip Zoom changes only what you see while working: the slide itself and the show are unaffected.

Fit to Window

Where to find it
  • View › Zoom and Window
Ctrl+0

Sets the zoom so the whole slide fits the window in one move, however far in you had gone.

  1. Click Fit to Window.
  2. The whole slide is shown at the largest size the window allows.
  3. Carry on editing at that level, or click Zoom to choose another.

Tip Reach for this after resizing the window, when the slide no longer sits neatly in the space.

New Window

Where to find it
  • View › Zoom and Window

Opens a second window on the same presentation, so you can keep two slides in view at once. It is not a copy: what you type in one window appears in the other, and there is a single save. The new window opens on the slide you were looking at.

  1. Open the presentation from Aerarys.
  2. Go to the slide you want to see in the second window.
  3. Click New Window.
  4. In the new window, pick another slide from the thumbnails on the left.
  5. Arrange the two windows as you like: they are system windows.
  6. Type in a text box — the text appears in the other window as well.

Tip The command is off on a presentation that is not yet saved in Aerarys: without an Aerarys entry the two windows would be two separate copies. The desktop app does not have it — it opens one window per document.

Arrange All

Where to find it
  • View › Zoom and Window

Arrange All shows the same presentation in two to four views at once, each scrolling on its own, so you can keep one slide in sight while you look at another.

  1. Click Arrange All.
  2. Choose how many views you want: 2, 3 or 4.
  3. Choose an arrangement: Side by side, Stacked or Grid.
  4. Scroll a view on its own with the wheel over it, or with the arrow keys on the view with the thicker border.
  5. Click Close when you have finished.

Tip Every slide carries its number above it, and a hidden slide appears dimmed with its number struck through. The first view opens on the slide you were on, and nothing done in the views changes the presentation.

Cascade

Where to find it
  • View › Zoom and Window

Arranges the windows opened from here with New Window in a cascade: all the same size, offset diagonally and inside the screen, so the title bar of each one stays in view. The window you click it in stays behind as the first card of the stack, and the most recently opened window ends up in front. Inside Palatys it arranges all the Teatrys windows in view in a cascade, and the window you click it in ends up in front.

  1. Open the presentation from Aerarys.
  2. Click New Window one or more times.
  3. Move and resize the windows as you work.
  4. Go back to the first window and click Cascade.
  5. Click the title bar of a window to bring it to the front.

Tip Outside Palatys the command is off until a window has been opened from here with New Window; each window arranges only the ones it opened itself, and after the page is reloaded it no longer finds them. Inside Palatys all the Teatrys windows in view are arranged; with only one, or with the others minimized, the command is greyed and clicking it explains how to make it available. The desktop app does not have it — it opens one window per document.

Move Split

Where to find it
  • View › Zoom and Window

Moves the lines between the slide thumbnails, the slide and the notes pane with the keyboard, without the mouse. The lines move on the window itself, so you see at once how big the thumbnails, the slide and the notes become.

  1. Click Move Split.
  2. The two lines light up and a box in the lower-left corner of the slide area lists the keys.
  3. Press Left or Right arrow to make the thumbnails narrower or wider.
  4. Press Up or Down arrow to make the notes pane taller or shorter.
  5. Press Enter to keep the lines where they are, or Esc to put them back.

Tip Clicking anywhere also keeps the lines where they are. The command works only in Normal view; with the notes pane hidden only the Left and Right arrows move a line. You can also drag both lines with the mouse.

Switch Windows

Where to find it
  • View › Zoom and Window

Switch Windows lists the Teatrys windows you have open and takes you to the one you pick, without reloading the presentation inside it: unsaved work stays where it is. Each row names the slide that window is looking at, or the master view it has open, so two windows on the same presentation do not say the same thing.

  1. Open a second window with New Window, or open another presentation from Aerarys.
  2. In the menu, open the Switch Windows submenu.
  3. Pick the window from the list: the ticked row is the one you are already in.
  4. With more than nine windows, choose More Windows to see them all in a scrolling list.

Tip A slide without a title is named by its number. Two windows on the same slide are told apart by the number after the name: Deck.pptx — 4. Results:1 and Deck.pptx — 4. Results:2.

Back to the guide

Productivity, made in Italy.

Bring the whole suite to your team — simple, secure and entirely yours.