Teatrys guide

Tools

The step-by-step guide to every command in the Tools menu of Teatrys.

Spelling

Where to find it
  • Tools › Proofing
F7

Runs a spelling check over the text of the presentation. Reach for it before you share a deck or stand up to present it, because a typo on a slide is on show to the whole room.

  1. Click Spelling.
  2. Wait while the check runs over the text of the presentation.
  3. Deal with each word it flags, in turn.
  4. Close the check when it reaches the end.

Tip A word the check does not recognise is not necessarily wrong: names and technical terms are often flagged.

Thesaurus

Where to find it
  • Tools › Proofing
Shift+F7

Looks up another word with the same meaning as the one you are working on, so a slide does not repeat itself. It works on the word at the cursor, on the words of the selected text or on the words of a selected shape.

  1. Place the cursor on the word, select some text or select the shape that holds it.
  2. Click Thesaurus.
  3. If several words are offered, pick the one to replace from the strip.
  4. Select a synonym and click Insert.

Tip The word to replace is highlighted on the slide and named in the bottom line together with its slide number, because the box stays open while you keep working. Shift+F7 opens it too.

Check Accessibility

Where to find it
  • Tools › Proofing

Inspects the presentation for the things that make it hard to read for some people. Run it on any deck that goes out to an audience you do not know.

  1. Click Check Accessibility.
  2. Read the list of problems it reports.
  3. Select a problem to see which slide it concerns.
  4. Correct the slide, then run the check again to confirm it is clear.

Tip Run it early rather than at the end: a habit corrected once costs far less than the same problem corrected on twenty slides.

Language

Where to find it
  • Tools › Proofing

Tells the proofing tools which language the text is written in. Set it wherever a slide departs from the language of the rest of the deck, or the spelling check will flag every word of it.

  1. Select the text whose language you want to set.
  2. Click Language.
  3. The Language window opens.
  4. Pick the language the text should be checked against.

Tip A quotation in another language is worth marking on its own, so that the rest of the slide is still checked properly.

Translate

Where to find it
  • Tools › Proofing

Translates the text of a slide into another language and shows it next to the original, so you can read it before it goes into the presentation. It works on the selected text, on the text box the cursor is in, on the selected shapes or on the whole presentation.

  1. Select the text or the shapes to translate, or click in a text box.
  2. Click Translate. To translate every slide and its notes, choose Translate Presentation from the Translate submenu.
  3. Check the target language in the pill at the top right and change it if you need to.
  4. Read the translation next to the original, row by row.
  5. Click Replace to write it into the presentation.

Tip A single Undo puts everything back: the replacement is one change. Fields such as the slide number stay where they are, and a passage that could not be translated says so and is left as it was.

New Comment

Where to find it
  • Tools › Comments and Compare
  • Toolbar

Attaches a note to the slide so you can raise a point without altering the slide itself. This is how a review conversation happens inside the file rather than around it.

  1. Go to the slide, or select the object, that the note is about.
  2. Click New Comment.
  3. Type your note.
  4. Click away from the note to store it.

Tip A comment sits alongside the slide, not on it, so it changes nothing about how the slide itself looks.

Comment

Where to find it
  • Tools › Comments and Compare
  • Toolbar

Adds a note about this part of the deck, so you and your colleagues can discuss it without changing the slide itself.

  1. Go to the slide, or select the object, you want to comment on.
  2. Click Comment.
  3. Type your note.
  4. Read and answer the replies in the comments panel that opens.

Tip The note stays with the deck, so whoever opens it next reads the discussion in the same panel.

Previous Comment

Where to find it
  • Tools › Comments and Compare › Browse Comments
  • Shortcut menu

Steps back to the comment before the current one. Together with Next Comment it lets you work through a reviewed deck in order, instead of hunting slide by slide.

  1. Click Previous Comment.
  2. Read the note it moves to and deal with the point it raises.
  3. Click Previous Comment again to carry on backwards through the deck.

Tip It moves between slides as well as within one, so you do not have to find the right slide first.

Next Comment

Where to find it
  • Tools › Comments and Compare › Browse Comments
  • Shortcut menu

Moves on to the comment after the current one. It is the forward half of the pair you use to review a deck from beginning to end.

  1. Click Next Comment.
  2. Read the note it moves to and deal with the point it raises.
  3. Click Next Comment again to continue through the deck.

Tip Delete each comment as you settle it, and what is left in the deck is exactly the work still outstanding.

Delete Comment

Where to find it
  • Tools › Comments and Compare
  • Shortcut menu

Removes a comment once the point it raised has been dealt with. Clearing settled notes is what keeps the remaining ones worth reading.

  1. Select the comment you want to remove.
  2. Click Delete Comment.
  3. Check that the note has gone from the slide.

Tip Nothing on the slide changes when a comment goes; only the note itself is removed.

Show Comments

Where to find it
  • Tools › Comments and Compare

Shows or hides the panel that lists the comments. Hide it while you are laying out a slide, show it while you are reviewing one.

  1. Click Show Comments.
  2. Read the notes in the panel that appears.
  3. Click Show Comments again to hide the panel.

Tip Hiding the panel deletes nothing: the comments stay in the file and come back the moment you show it again.

Show Comments

Where to find it
  • Tools › Comments and Compare

Shows or hides the panel that lists the comments. Hide it while you are laying out a slide, show it while you are reviewing one.

  1. Click Show Comments.
  2. Read the notes in the panel that appears.
  3. Click Show Comments again to hide the panel.

Tip Hiding the panel deletes nothing: the comments stay in the file and come back the moment you show it again.

Mark All as Read

Where to find it
  • Tools › Comments and Compare

Marks as read the changes other people have made to a shared presentation. The window first shows which slides they are on, who made them and when.

  1. In a shared presentation, look for the dot under the slide numbers in the thumbnail pane: those slides have changes by other people that you have not read yet.
  2. Click Mark All as Read.
  3. Read the list: one row per slide, with who made the last change, when, and how many changes there are.
  4. Click Mark as Read: the dots disappear.

Tip Marking as read is for you only and does not change the presentation. It cannot be undone, and a change that arrives while the window is open stays unread.

User Name

Where to find it
  • Tools › Comments and Compare

Sets the name that appears against the comments you write. Fill it in before you review someone else's deck, or your remarks arrive unsigned.

  1. Click User Name.
  2. A dialog opens where you type the name you want shown.
  3. Confirm to store it.
  4. Add a comment and check that the name beside it is the one you set.

Tip Changing the name applies to comments you write from now on, not to ones you have already left.

Compare presentations

Where to find it
  • Tools › Comments and Compare

Sets your presentation against another version of it and shows you where the two differ. Use it when a copy comes back from a colleague and you need to see what has moved.

  1. Open the version of the presentation you want to treat as the base.
  2. Click Compare presentations.
  3. Choose the other version of the file to compare it with.
  4. Work through the differences it reports and decide which to keep.

Tip Compare the two files before you edit either of them, so that every difference you see is the other person's and not your own.

Show Changes

Where to find it
  • Tools › Comments and Compare

Highlights on the slide the shapes other people have changed in a shared presentation and that you have not read yet. Each one has a dashed outline in the colour of the person who changed it, with their avatar underneath.

  1. Open a shared presentation and go to a slide with a dot under its number in the thumbnail pane.
  2. The shapes other people have changed have a dashed outline, with the avatar of who changed them under the bottom-left corner.
  3. Point at the avatar to read who made the change, when, what they changed and how many times.
  4. To hide or show the highlights, click Show Changes: the button stays pressed while they are shown.

Tip The highlights stay until you mark the changes as read with Mark All as Read. Turning them on or off is for you only and does not change the presentation.

Dictation

Where to find it
  • Tools › Voice

Dictation writes what you say. You speak, the window shows what it understood, and only when you press Insert does the text reach the slide — so a sentence that came out wrong is thrown away instead of being unpicked afterwards. Punctuation is spoken too: say comma and you get a comma. It needs a text box: select one with a single click, or put the cursor inside it, because the text has to have somewhere to go, and it works in the browser version of Merydion.

  1. Select a text box on the slide with a single click — or click inside it, if you want to write at a particular spot.
  2. Click Dictate.
  3. Click Start dictation and allow the microphone when the browser asks for it.
  4. Speak: what has been understood appears in the window, and what is still being heard is shown in lighter type.
  5. Say comma, period or new line to punctuate without touching the keyboard.
  6. Click Insert to put the text where you were writing, or Cancel to discard it.

Tip Spoken language is the language you speak, not the language of the slide: change it from the row at the bottom of the window if you are dictating in another one.

Linked Notes

Where to find it
  • Tools › Voice

Opens a pane beside the slides with your own notes on this presentation. Each note is linked to the slide you were looking at when you wrote it, and clicking it takes you back there. The notes are not saved in the presentation, and only you can see them.

  1. Open a presentation stored in Aerarys.
  2. Click Linked Notes: the pane opens to the right of the slide and the button stays pressed.
  3. Click New note on slide, write the note and click Add.
  4. Click a note, or the name of its slide, to go back to that slide. Use the pencil to edit a note and the bin to delete it.

Tip The notes stay on this device, under your account. Notes written on a slide that has since been deleted stay at the bottom of the pane, and a note whose slide has changed title says so. On a presentation that is not in Aerarys the pane opens anyway and explains why no notes can be written.

Select

Where to find it
  • Tools › Draw › Drawing Tools

Puts the pointer back to picking and moving objects after you have been drawing. It is the way out of a pen.

  1. Click Select.
  2. Click an object on the slide to select it.
  3. Move or resize it as usual.
  4. Pick a pen again when you want to go back to drawing.

Tip While a pen is active a click draws instead of selecting, so come back here before editing the slide.

Lasso Select

Where to find it
  • Tools › Draw › Drawing Tools

Circles ink strokes freehand so you can pick them up: the ones enclosed whole stay chosen, and you move or delete them together.

  1. Click Lasso Select.
  2. Draw a loop around the strokes you want to pick up.
  3. Drag inside the box to move them, or press Delete to remove them.

Tip Only what falls fully inside counts: a stroke sticking out of the loop is left where it is.

Eraser

Where to find it
  • Tools › Draw › Drawing Tools

Rubs out the ink you have drawn and leaves the rest of the slide alone. Use it to tidy a drawing rather than starting it again.

  1. Click Eraser.
  2. Drag over the ink you want to remove.
  3. Carry on until only the ink you meant to keep is left.
  4. Click Select to go back to the pointer.

Tip The eraser only takes away ink; text and shapes are removed the usual way, with the pointer.

Pen: Black

Where to find it
  • Tools › Draw › Drawing Tools

Draws on the slide in black, the plain colour for notes and marks. Use it to write or sketch over what is already there.

  1. Click Pen: Black.
  2. Drag on the slide to draw.
  3. Carry on drawing; every stroke is added to the slide.
  4. Click Select when you have finished.

Tip To take away one stroke out of many, the Eraser is more precise than undoing your way back to it.

Pen: Red

Where to find it
  • Tools › Draw › Drawing Tools

Draws in red, the colour that reads as a correction or a warning. Handy for marking what has to change.

  1. Click Pen: Red.
  2. Drag on the slide to draw.
  3. Switch to another pen when you want a different colour.
  4. Click Select to go back to the pointer.

Tip Red on a dark background is hard to read; check the slide as the audience will see it.

Pen: Galaxy

Where to find it
  • Tools › Draw › Drawing Tools

Draws with an ink that changes colour along the stroke, from deep blue through violet. Use it when the mark itself should be noticed — a circled title, an arrow — not when it simply has to be legible.

  1. Click Pen: Galaxy.
  2. Drag on the slide: the colours follow one another along the stroke.
  3. Draw long strokes: a short one shows a single colour.
  4. Click Select when you are done.

Tip The colours follow the length of the stroke, not how long you take: two identical marks come out identical.

Pencil

Where to find it
  • Tools › Draw › Drawing Tools

Leaves a graphite mark, narrower and grainier than a pen: the paper shows through the stroke. Use it to sketch, when the mark should look provisional.

  1. Click Pencil.
  2. Drag on the slide to draw.
  3. Zoom in to see the grain of the stroke.
  4. Click Select when you are done.

Tip The pencil is not a grey pen: the grain survives into printing and into the PDF.

Highlighter: Yellow

Where to find it
  • Tools › Draw › Drawing Tools

Draws over the slide with a translucent yellow marker, so what is underneath still shows through. Use it to pick out a word or a figure.

  1. Click Highlighter: Yellow.
  2. Drag across what you want to pick out.
  3. Check the text underneath is still readable.
  4. Click Select to go back to the pointer.

Tip Mark one or two things per slide: when everything is highlighted, nothing stands out.

Pen: Blue

Where to find it
  • Tools › Draw › Drawing Tools

Draws in blue, a softer alternative to black for marks that should read as additions. Useful for telling one person's notes from another's.

  1. Click Pen: Blue.
  2. Drag on the slide to draw.
  3. Switch pens whenever you need another colour.
  4. Click Select to go back to the pointer.

Tip Giving each reviewer a colour of their own makes a marked-up deck much easier to read.

Pen: Green

Where to find it
  • Tools › Draw › Drawing Tools

Draws in green, which sits naturally alongside red for ticks and approvals. Choose it when the marks need telling apart by colour.

  1. Click Pen: Green.
  2. Drag on the slide to draw.
  3. Switch to another pen when the meaning of the marks changes.
  4. Click Select to go back to the pointer.

Tip Do not lean on colour alone: some of your audience will not tell green from red.

Add Pen

Where to find it
  • Tools › Draw › Drawing Tools

Makes a pen of your own: a type, a colour and a thickness, and keeps the pens you have already made. The large preview shows the stroke on the background of the slide it will fall on: if it would not show there, it stays blank — and that is the answer. The type and thickness tiles instead move to a paper the colour shows on, so they stay comparable. The pens you make are kept for the next time you open the app.

  1. Click Add.
  2. Or, in the menu, choose one of the items that follow Add to open the window already set to that type.
  3. Choose the type — pen, pencil or highlighter — then the colour and the thickness.
  4. Click Use: the pen joins your tools and is ready to draw with.
  5. To use one again, click its row and choose Use; to get rid of it, click Delete.

Tip A highlighter is see-through, so what you see depends on the background behind it.

Ruler

Where to find it
  • Tools › Draw

Lays a straightedge on the slide. Ink drawn along either of its long edges comes out perfectly straight, and the ruler stays where you put it until you turn it off.

  1. Click Ruler.
  2. Drag the body of the ruler to move it, or one of the round knobs at its ends to tilt it.
  3. Click the degree badge in the middle to set an exact angle.
  4. Pick a pen and draw along one of the long edges: the stroke follows the ruler.
  5. Click Ruler again to take it away.

Tip The ruler catches a stroke only when the stroke starts close to one of its edges. Start further away and you draw freehand, as usual.

Ink to shape

Where to find it
  • Tools › Draw

Turns strokes you drew by hand into real shapes — a rectangle, a circle, a triangle — that you can then move, resize and fill like any other. It works on the ink already on the slide, and it shows you the shape it recognised drawn over your stroke, so you can check it before anything is replaced.

  1. Draw one or more strokes on the slide with a pen.
  2. Click Ink to shape.
  3. Each stroke gets a row, with the recognised shape drawn over it. Untick a row to leave that stroke as ink, or pick a different shape from the alternatives.
  4. Click Convert. Each stroke is replaced by its shape, in the same place.

Tip One undo brings back every stroke at once, however many you converted. If a shape is only a weak match the row says so and stays unticked — look at it before you convert.

Ink to Math

Where to find it
  • Tools › Draw

Turns a formula you wrote by hand on the slide into a real equation that you can then edit, move and resize like any other. Select the strokes of the formula and the command opens a window with them already read: the preview at the top shows exactly the equation that will take their place.

  1. Write the formula on the slide with a pen.
  2. With Select, click the first stroke of the formula, then Shift-click the others.
  3. Click Ink to Math.
  4. Check the preview at the top. If a symbol was read wrong, press Correct, touch it and pick another reading; you can also erase a stroke or write one more.
  5. Click Convert. The strokes are replaced by the equation, where the formula was — or click Edit… to refine it in the equation editor first.

Tip With nothing selected, the same command opens a blank sheet to write a new equation, as does Open Ink Equation Editor in its menu. A stroke you erase in the window stays on the slide as ink, and a single Undo brings back every stroke you converted.

Ink Replay

Where to find it
  • Tools › Draw

Replays the slide's ink strokes as they are drawn again, one after another, in the order you drew them. The stage shows the whole slide, so you also see where each annotation was. Nothing on the slide changes.

  1. Draw one or more strokes on the slide with a pen.
  2. Click Ink Replay.
  3. Watch the strokes reappear in the order you drew them, in the place they occupy on the slide.
  4. Use the button to pause and resume, and drag the bar to go back to the part you care about.
  5. Close the window: the slide is unchanged.

Tip The space bar pauses and resumes, the arrows move by one second, Home starts over. If you have strokes selected only those are replayed, and the line under the stage says so. On a slide without ink the window still opens and tells you.

Hide Ink

Where to find it
  • Tools › Draw

Takes the pen, pencil and highlighter strokes of the presentation out of sight — on the slides, in the thumbnails and in the slide show — without deleting them. The presentation does not change.

  1. Click Hide Ink.
  2. The strokes disappear from the slides, the thumbnails and the slide show, and the button stays pressed.
  3. Click it again to show them.

Tip Printing and exporting to PDF still include the strokes. Picking up a pen, the pencil, the highlighter or the eraser shows the ink again on its own, and the command is off when the presentation contains no ink.

Add-ins

Where to find it
  • Tools › Extensions

Teatrys on its own is a local editor. The add-ins are the suite components that extend it: the account that gives you a user area, Aerarys you open and save documents from, and shared editing. This window lists them, says what each one adds, and checks whether it is answering right now.

  1. Click Add-ins.
  2. Read each row: the name, what it adds to the app, and the label saying what is missing.
  3. Select a row and click Test connection to ask that component again.
  4. Where a row says a sign-in is required, select it and click Sign in.
  5. Click Close when you are done.

Tip A row with no label beside it is a component that is answering and needs nothing: only what is missing is written down.

Macros

Where to find it
  • Tools › Extensions

A macro records the formatting commands you apply to text and shapes — font, colour, alignment, bullets, shape fill and outline, WordArt styles — and repeats them on what is selected when you run it. It is not a program you write: it is the sequence you have just performed, kept so you can perform it again.

  1. In the menu, open the Macros submenu and choose Record Macro.
  2. Format text or a shape the way you want it. What you select is not recorded, and neither is what you type: a macro always works on the current selection.
  3. Choose Stop Recording from the same submenu. The macro is saved and the list opens on it.
  4. Select other text or another shape, open View Macros from the same submenu, choose the macro and click Run.

Tip On a shape selected as an object, text commands dress all of its text; with text selected inside a shape, shape commands dress the shape that holds it. Running a macro leaves a single Undo step, and Steps… shows exactly what it will do. Macros belong to you, not to the presentation: they do not travel inside the file you send.

Back to the guide

Productivity, made in Italy.

Bring the whole suite to your team — simple, secure and entirely yours.