Teatrys guide

Slide

The step-by-step guide to every command in the Slide menu of Teatrys.

Layout

Where to find it
  • Slide › Slide
  • Pane › Slide
  • Shortcut menu

A layout decides which placeholders a slide carries and where they sit. Change it when a slide needs a different arrangement from the one it was created with.

  1. Select the slide you want to rearrange.
  2. Click Layout.
  3. The available arrangements open, each one as a thumbnail.
  4. Choose the layout you want.

Tip If you have dragged the placeholders about, Reset puts them back the way the layout has them.

Reset slide

Where to find it
  • Slide › Slide
  • Pane › Slide

Reset puts a slide's settings back the way they started, undoing the adjustments made to it since. Use it when a slide has drifted out of shape and you want the clean version back.

  1. Select the slide you want to restore.
  2. Click Reset.
  3. Check the slide and reapply anything you still wanted.

Tip If Reset takes away something you meant to keep, undo it straight away.

Hide Slide

Where to find it
  • Slide › Slide
  • Pane › Slide
  • Shortcut menu

Keeps a slide in the file but leaves it out of the show. Use it for material you may want for questions but not for the talk itself.

  1. Select the slide you want to leave out.
  2. Click Hide Slide.
  3. Run the show and check it goes straight past that slide.
  4. Check the deck still reads well without it.

Tip The slide is only skipped in the show; it stays in the file, and you can still edit and save it.

Design Ideas

Where to find it
  • Slide › Theme and Background

Suggests arrangements for the current slide: each one is your own slide, with its title, text and pictures moved into a different layout. Use it when a slide holds the right content but does not look composed yet.

  1. Click Design.
  2. Pick a tile: the large preview shows that arrangement on your own slide.
  3. Read the line under the preview to see what the arrangement does.
  4. Click Apply. One press of Ctrl+Z undoes the whole rearrangement.

Tip The ideas come from what is already on the slide, so they change as you add a title, text or a picture, and an empty slide has none. Nothing is added or removed: an idea only moves and resizes what is there, and a picture keeps its proportions.

Design Ideas

Where to find it
  • Slide › Theme and Background

Suggests arrangements for the current slide: each one is your own slide, with its title, text and pictures moved into a different layout. Use it when a slide holds the right content but does not look composed yet.

  1. Click Design.
  2. Pick a tile: the large preview shows that arrangement on your own slide.
  3. Read the line under the preview to see what the arrangement does.
  4. Click Apply. One press of Ctrl+Z undoes the whole rearrangement.

Tip The ideas come from what is already on the slide, so they change as you add a title, text or a picture, and an empty slide has none. Nothing is added or removed: an idea only moves and resizes what is there, and a picture keeps its proportions.

Themes

Where to find it
  • Slide › Theme and Background › Theme

Changes the look of every slide at once, colours and fonts together. Start here when a deck needs a new appearance.

  1. In the menu, pick one of the themes that follow the Themes item.
  2. To see them all at once, as thumbnails, choose All themes.
  3. Look through the deck and check the slides still fit their text.
  4. Pick a variant to change only the colours of the theme you have chosen.

Tip A theme reaches the whole deck, so choose it early rather than after every slide has been formatted by hand.

All themes

Where to find it
  • Slide › Theme and Background › Theme

All themes opens the whole set in one panel, so you can compare the themes side by side instead of scrolling four at a time.

  1. Click All themes.
  2. Read the panel: every theme is drawn as a slide in miniature, and the one the deck uses now is marked.
  3. Click a theme to apply it to the whole deck, or press Esc to close the panel without changing anything.

Tip Each tile shows what the theme does: the background colour, the colour of the titles, and four of the accent colours along its edges. No tile is marked when the deck uses a theme that is not in the gallery.

Variants

Where to find it
  • Slide › Theme and Background › Theme

Changes only the colours of the whole deck and keeps its fonts. Use it when the layout and the type are right but the palette is not.

  1. In the menu, open the Variants submenu and pick one.
  2. To see them all at once, as thumbnails, choose All variants.
  3. Check a text-heavy slide for contrast before you settle.

Tip Pick the theme first: a theme brings its own colours, so choosing it afterwards replaces the variant.

All variants

Where to find it
  • Slide › Theme and Background › Theme

All variants opens every colour set in one panel, so you can compare them side by side instead of scrolling three at a time.

  1. Click All variants.
  2. Read the panel: every variant is drawn with its own colours, and the one the deck uses now is marked.
  3. Click a variant to change the colours of the whole deck, or press Esc to close the panel without changing anything.

Tip A variant changes only the colours: the fonts of the deck stay as they are.

Customize Colors

Where to find it
  • Slide › Theme and Background › Theme

Builds your own colour set for the theme, instead of taking a variant as it comes. Use it to bring a deck in line with house colours.

  1. Click Customize Colors.
  2. Set the colours in the dialog that opens.
  3. Confirm, then look at a slide that uses several of them.
  4. Adjust any colour that is hard to read against the background.

Tip Check the set on a chart as well as on text: a chart puts several of the colours side by side.

Customize Fonts

Where to find it
  • Slide › Theme and Background › Theme

Builds your own pairing of heading and body font for the theme. Use it when the deck has to follow a typeface you have been given.

  1. Click Customize Fonts.
  2. Choose the fonts in the dialog that opens.
  3. Confirm and check a slide that has both a heading and body text.
  4. Read that slide at presentation size before you settle.

Tip The pairing applies across the deck, so any text whose font was set by hand will not follow it.

Slide Size

Where to find it
  • Slide › Theme and Background

Sets the shape and the size of the slides, so the deck matches the screen it will be shown on. Decide it before you lay out the content.

  1. Click Slide Size.
  2. In the menu, Slide Size opens a submenu with the other shapes and sizes.
  3. Pick the one that matches the screen you will present on.
  4. Look through the deck and fix anything that no longer fits.

Tip Changing the size once the deck is built reflows every slide, so check the pictures and the charts afterwards.

Format Background

Where to find it
  • Slide › Theme and Background
  • Pane › Slide

Sets what sits behind the slide, a colour or a picture. Useful for a title slide or a section opener that should stand apart.

  1. Select the slide you want to change.
  2. Click Format Background.
  3. Choose the colour or the picture you want behind the slide.
  4. Check the text on the slide is still readable against it.

Tip For a background that every slide should share, set it on the master instead of slide by slide.

Transitions

Where to find it
  • Slide › Transition
  • Pane › Animation

The gallery of effects that carry one slide into the next: each thumbnail illustrates what its effect does — the curtains that open, the doors that swing wide, the page that folds into a paper plane. Pick one and it applies to the slide you are on.

  1. Select the slide that should come in with an effect.
  2. In the Format pane, pick an effect from the transition tiles.
  3. To see the other effects, open the Transitions submenu in the menu, or choose All transitions to see them all at once.
  4. Click Preview to watch the slide play the effect.

Tip Use Apply To All to give every slide the effect you have just chosen.

All transitions

Where to find it
  • Slide › Transition
  • Pane › Animation

All transitions opens every transition in a single panel, grouped into Subtle, Exciting and Dynamic Content, so you can compare them instead of scrolling ten at a time.

  1. Click All transitions.
  2. Read the panel: each thumbnail illustrates what its transition does, with the slide that leaves drawn as a document and the one that arrives as a picture in the accent colour; the transition of the current slide is highlighted.
  3. Click a transition to apply it to the current slide, or press Esc to close the panel without changing anything.

Tip Some transitions look alike in their thumbnails because this version plays them with the same movement; each one is still saved under its own name, and PowerPoint plays it as its own.

Preview

Where to find it
  • Slide › Transition
  • Pane › Animation

Plays the transition of the current slide on the spot, so you can judge it without starting the show.

  1. Select the slide whose transition you want to see.
  2. Click Preview.
  3. Watch the slide play the effect once.
  4. Adjust the effect or its timing and preview again.

Tip Previewing is far quicker than running the show when you are trying several effects one after another.

Effect Options

Where to find it
  • Slide › Transition
  • Pane › Animation

Sets the direction and the shape of the effect, so a wipe can come from the left or from the top. What is on offer depends on the effect.

  1. Select the slide that carries the transition.
  2. Click Effect Options.
  3. The list of the directions and shapes available opens.
  4. Pick one and preview the slide.
  5. The option in force carries a tick; the list is the same as PowerPoint's for that effect.

Tip Choose the effect first: these options belong to it, and change when you pick another effect.

Sound

Where to find it
  • Slide › Transition
  • Pane › Animation

Plays a sound as the slide comes in. Use it sparingly, for the one moment in the deck that deserves it.

  1. Select the slide that should make a sound; it needs a transition, so pick one first if it has none.
  2. Choose a sound from the Sound list.
  3. Preview the slide to hear it in place.
  4. Choose another entry in the list to change or drop the sound.

Tip Turn on Loop until next sound to keep the sound going across the slides that follow.

Loop until next sound

Where to find it
  • Slide › Transition
  • Pane › Animation

Keeps the transition sound playing until another sound starts, instead of stopping with the effect. Made for music that should run across several slides.

  1. Select the slide whose sound should carry on.
  2. Choose the sound from the Sound list.
  3. Click the Loop until next sound button: it turns on only when the slide has a sound.
  4. Run through the following slides and check where the sound stops.

Tip The sound only stops when the next one starts, so give the slide that should end it a sound of its own.

Duration

Where to find it
  • Slide › Transition
  • Pane › Animation

Sets how long the transition takes to play. A short duration keeps the deck brisk; a long one draws attention to the change.

  1. Select the slide that carries the transition.
  2. Choose a length from the Duration list.
  3. Click Preview to see the effect at that speed.
  4. Adjust the length until it feels right.

Tip Duration is the length of the animation, not how long the slide stays on screen; that is what After sets.

After (time)

Where to find it
  • Slide › Transition
  • Pane › Animation

How long the slide stays on screen before the show moves on. Choosing a time also ticks the After box beside it.

  1. Select the slide you want to time.
  2. Choose the waiting time from the list next to After: the After box ticks itself.
  3. Run the show and lengthen the time if the slide goes by too quickly.

Tip Time each slide by how long it takes to read, and reach for Apply To All only where the slides carry a similar amount of text.

On Mouse Click

Where to find it
  • Slide › Transition › Advance Slide
  • Pane › Animation

Holds the slide on screen until you click, so the show waits for you rather than running ahead. The usual choice for a talk given live.

  1. Select the slide that should wait for you.
  2. Tick On Mouse Click.
  3. Set the same choice on the other slides, or click Apply To All.
  4. Run the show and check it waits where you expect.

Tip Use After instead when the deck has to run on its own, with nobody there to click.

After (advance automatically)

Where to find it
  • Slide › Transition › Advance Slide
  • Pane › Animation

Moves the show on by itself once the set time has passed, without waiting for a click. Turn it on for a deck that plays unattended.

  1. Select the slide that should move on by itself.
  2. Tick After.
  3. Choose the waiting time in the list beside it.
  4. Run the show and check the pace.

Tip On Mouse Click and After are the two ways a slide can end; pick the one that suits how the deck will be shown.

Apply To All

Where to find it
  • Slide › Transition
  • Pane › Animation

Copies the transition, sound and timing of the current slide onto every slide of the deck. The quick way to give a presentation one rhythm.

  1. Select the slide whose settings you want to spread.
  2. Set its effect, sound and timing the way you want them.
  3. Click Apply To All.
  4. Step through the deck and set again the slides that needed something different.

Tip It replaces what the other slides already had, so deal with the exceptions afterwards, not before.

Add Animation

Where to find it
  • Slide › Animations
  • Pane › Animation

Gives an object a further effect on top of the one it already has, so it can arrive, be emphasised and then leave. Use it rather than the gallery, which would replace the existing effect instead of adding to it.

  1. Select the object that is already animated.
  2. Click Add Animation.
  3. In the panel that opens, click the effect to add: the effects are grouped into Entrance, Emphasis, Exit and Motion Paths.
  4. Preview the slide to check the effects run in the order you meant.

Tip Every added effect is a separate step in the slide's sequence, so an object with three effects takes three steps to get through.

Animations

Where to find it
  • Slide › Animations
  • Pane › Animation

The list of effects you choose from to bring an object onto the slide, make it stand out, take it off again or move it along a path. In All animations each thumbnail shows its effect stopped partway, in the colour of its kind. Picking one here replaces whatever effect the object had before.

  1. Select the object you want to animate.
  2. In the Format pane, pick an effect from the Animations list.
  3. The same list is the Animations submenu in the menu; All animations shows the effects all at once instead, as thumbnails.
  4. Click Preview to watch the slide play the effect.

Tip Animations gives an object one effect: to give the same object a second one, use Add Animation instead.

All animations

Where to find it
  • Slide › Animations
  • Pane › Animation

All animations opens every animation in a single panel, grouped into Entrance, Emphasis, Exit and Motion Paths, so you can compare them instead of searching the Animations list.

  1. Select the object you want to animate.
  2. Click All animations.
  3. Read the panel: each thumbnail shows its effect stopped partway, in the colour of its kind — green for entrance, amber for emphasis, red for exit, blue for motion paths; the animation of the selected object is highlighted.
  4. Click an animation to give it to the object in place of the one it had, or press Esc to close the panel without changing anything.

Tip To give the object a further effect instead of replacing the one it has, open the same panel from Add Animation.

Effect Options

Where to find it
  • Slide › Animations
  • Pane › Animation

Sets the direction and the shape of the effect the object already carries, such as which way it flies in. What is on offer depends on the effect you chose.

  1. Select the object that already carries the animation.
  2. Click Effect Options.
  3. In the menu, Effect Options opens a submenu with the full set of choices.
  4. Pick the direction or shape you want, then preview the slide.

Tip Change the effect and its options change with it, so settle the effect first and its direction afterwards.

Start

Where to find it
  • Slide › Animations
  • Pane › Animation

Says what sets the animation going, whether that is a click or the step before it. This is the setting that decides if a slide advances under your hand or plays through on its own.

  1. Select the animated object.
  2. Open the Start list.
  3. Choose what should set the animation off.
  4. Preview the slide to check it starts when you expect.

Tip Settle Start before you fuss over Delay: what an animation waits for matters more than how long it waits.

Duration

Where to find it
  • Slide › Animations
  • Pane › Animation

Sets how long the effect takes to play from beginning to end. A short duration reads as crisp, a long one as laboured.

  1. Select the animated object.
  2. Open the Duration list.
  3. Choose how long the effect should take.
  4. Preview the slide and adjust until it feels right.

Tip Give the same duration to effects that play together, or they finish at different moments and the slide looks ragged.

Delay

Where to find it
  • Slide › Animations
  • Pane › Animation

Holds the animation back for a set time after whatever starts it. Use it to space out effects that would otherwise land on top of one another.

  1. Select the animated object.
  2. Open the Delay list.
  3. Choose how long the animation should wait before it plays.
  4. Preview the slide to check the spacing.

Tip The delay counts from the moment the animation is set off, not from the start of the slide.

Trigger

Where to find it
  • Slide › Animations
  • Pane › Animation

Ties an animation to another object, so that it only plays when that object is clicked during the show. Use it for a deck you drive by hand rather than one that runs itself.

  1. Select the animated object you want to hold back.
  2. Click Trigger.
  3. In the menu, Trigger opens a submenu with the further choices.
  4. Choose the object whose click should set the animation off.
  5. Run the slide and click that object to check the trigger works.

Tip A triggered animation waits outside the normal sequence, so it never plays at all if nobody clicks the object.

Move Earlier

Where to find it
  • Slide › Animations › Reorder Animation
  • Pane › Animation

Moves the selected animation one place up the slide's sequence. Use it to put the order right when an effect arrives after the thing it was meant to introduce.

  1. Select the animated object, or its entry in the Animation Pane.
  2. Click Move Earlier.
  3. Click it again for each further place you want the animation to move up.
  4. Preview the slide to confirm the new order.

Tip It turns off when the animation is already the first of the slide. Open the Animation Pane first: it shows the order as a list, which makes a long sequence far easier to rearrange.

Move Later

Where to find it
  • Slide › Animations › Reorder Animation
  • Pane › Animation

Moves the selected animation one place down the slide's sequence. It is the counterpart of Move Earlier and works the same way.

  1. Select the animated object, or its entry in the Animation Pane.
  2. Click Move Later.
  3. Click it again for each further place you want the animation to move down.
  4. Preview the slide to confirm the new order.

Tip It turns off when the animation is already the last of the slide. Moving an animation changes only its place in the order; its Start setting and its timing stay as they were.

Animation Painter

Where to find it
  • Slide › Animations
  • Pane › Animation

Copies the whole set of animations from one object onto another. Use it when several objects have to behave identically, instead of setting each one up by hand.

  1. Select the object whose animations you want to copy.
  2. Click Animation Painter.
  3. Click the object that is to receive them.
  4. Preview the slide to confirm both objects now behave the same way.

Tip It carries the timing across as well as the effects, so the copy plays exactly as the original does.

Preview

Where to find it
  • Slide › Animations
  • Pane › Animation

Plays the animations of the current slide there and then, without starting the show. Use it after every change, so you see what the audience will see.

  1. Go to the slide whose animations you want to watch.
  2. Click Preview.
  3. Watch the effects play through, in order, on the slide.

Tip Preview plays the whole slide, so it is also how you catch two effects that collide with each other.

Animation Pane

Where to find it
  • Slide › Animations
  • Pane › Animation

Opens, in the Format pane, the list of every animation on the slide, in the order it plays. This is what makes a slide with more than a couple of effects manageable. An effect Teatrys cannot edit appears as “Effect not editable”, with a padlock: you can move it and remove it but not change it, and the slide show still plays it.

  1. Go to the slide whose animations you want to work on.
  2. Choose Animation Pane: the Format pane opens on Animation, with the list.
  3. Select an entry in the list to see which object it belongs to.
  4. Reorder the entries, or change their timing, from there.

Tip Selecting an entry in the pane picks out its object on the slide, which is the quickest way to tell which effect belongs to what.

From Beginning

Where to find it
  • Slide › Slide Show
F5

Runs the presentation from the first slide, whichever slide you were editing. This is how you rehearse the deck as the audience will see it.

  1. Click From Beginning.
  2. Move through the slides as you would when presenting.
  3. Watch for transitions and timings that do not work.
  4. Leave the show and fix what you noticed.

Tip Use From Current Slide instead when you only want to check the slide you are working on.

From Current Slide

Where to find it
  • Slide › Slide Show
Shift+F5

Starts the show at the slide you are on, so you can check your work without sitting through the whole deck. Handy while building a slide.

  1. Select the slide you want to check.
  2. Click From Current Slide.
  3. Watch that slide and the ones that follow it.
  4. Leave the show and carry on editing.

Tip A hidden slide is skipped here as well, so it will not appear even when you start on the slide before it.

In Simposys

Where to find it
  • Slide › Slide Show

Delivers the presentation to a Simposys conversation. The whole deck travels as a PDF, one page per slide; a single slide travels as a picture, which the conversation shows right inside the message. You choose who receives it and how much of it goes, and you see the slide before it leaves.

  1. Click In Simposys.
  2. Pick the conversation that receives it: channels come first, and a search box appears when the list is long.
  3. Choose whether to deliver the whole presentation or only the slide you are on.
  4. Write a line to go with it, if you want one.
  5. Click Deliver and wait for the window to say that it arrived.

Tip A single slide is the better choice when you want people to look at it without opening anything: it shows up inside the conversation.

Custom Slide Show

Where to find it
  • Slide › Slide Show

Builds a show that plays only the slides you choose, in the order you want: one file serves different audiences without duplicating it. A slide may appear more than once — as a bridge between two chapters, for instance.

  1. In the Custom Slide Show submenu choose Custom Shows to open the list of the ones you have.
  2. Press New: the composition window opens with the deck's slides on the left.
  3. Tick the slides you want and press Add: they enter the right-hand column, in deck order.
  4. Reorder the sequence with the two arrows, or drop a row with Remove.
  5. Name the show and press OK.
  6. To play it, open the command's submenu and choose its name.

Tip The left-hand row says how many times a slide is already in the sequence, and declares whether it is hidden: inside a custom show a hidden slide is shown anyway, because you picked it one by one.

Rehearse with Coach

Where to find it
  • Slide › Slide Show

Runs the slide show while listening to you and, at the end, shows feedback on how you spoke: your pace, your filler words, the phrases that came back, and the slides you read out instead of telling. It does not change the presentation.

  1. Click Rehearse with Coach.
  2. Allow the microphone when the browser asks.
  3. Present at the pace you actually intend to speak.
  4. Watch the badge at the top left: it says how much has been heard so far.
  5. Press Esc when you are done and read the report.

Tip If the badge says nothing is being heard, stop right away: feedback can only be given on what was heard, and the report says so rather than inventing a score.

Set Up Slide Show

Where to find it
  • Slide › Slide Show

Decides how the show runs and which slides it plays. Set it once for a deck that has to behave in a particular way.

  1. Click Set Up Slide Show.
  2. Set the options in the dialog that opens.
  3. Confirm, then run the show from the beginning.
  4. Check the show behaves the way you set it.

Tip These settings belong to the presentation rather than to one slide, so you only have to set them once.

Rehearse Timings

Where to find it
  • Slide › Slide Show

Runs the show while recording how long you spend on each slide. Use it to build timings for a deck that has to advance on its own.

  1. Click Rehearse Timings.
  2. Present the deck at the pace you intend to speak.
  3. Move on when you have finished with each slide.
  4. Check the recorded times against the slides afterwards.

Tip Rehearse at your real speaking pace: a rushed run produces timings that are too tight to follow.

Use Timings

Where to find it
  • Slide › Slide Show

Decides whether the presentation moves on by itself using the time saved on each slide, or always waits for you. Turning it off does not erase the times: they stay in the file and count again when you turn it back on.

  1. Click Use Timings to turn it on or off.
  2. Choose Slide Timings…, the item that follows it, to open the window of the times.
  3. Read the first line: it says how long the presentation runs on its own, or how many slides wait for you.
  4. Pick a slide to go to it, or to clear its time.

Tip A row that says it waits for you marks where the automatic run breaks: from there on the window no longer states when a slide comes up, because that depends on you and not on the file.

Keep Slides Updated

Where to find it
  • Slide › Slide Show

Decides whether a slide show that is already running follows the shared presentation. While you present, the slide on screen never changes in front of your audience: a change that touches it is applied when you move on, and every other slide is updated at once.

  1. Click Keep Slides Updated.
  2. Turn “Follow changes to the shared presentation” on or off.
  3. Read who is editing the deck and which slides have changed.
  4. Confirm: the choice applies to the show you are about to give.

Tip Open it again after presenting: the window says how many changes arrived while you had the floor, and on which slides.

Show Media Controls

Where to find it
  • Slide › Slide Show

Decides whether an audio or video shows its playback and volume buttons during the show. Turn it off when the audience should not see a bar across the film.

  1. Clear Show Media Controls.
  2. Run the show and reach the slide holding the audio or video.
  3. Check that the media appears with no buttons over it.
  4. Select it again if you need to be able to pause during the talk.

Tip The setting belongs to the presentation and travels with the file. With the controls hidden, a media set to On Click still starts when you click its frame.

Use Presenter View

Where to find it
  • Slide › Slide Show › Monitor and Presenter

Puts your notes and the next slide on your own screen, while the audience sees only the slide. Turn it on when you present from a laptop onto a second screen.

  1. Click Use Presenter View.
  2. Start the show from the beginning.
  3. Check your screen shows the notes and the audience screen does not.
  4. Present from your screen while the audience follows the other one.

Tip It needs a second screen to be of any use; on a single screen there is nowhere to put the audience view.

Monitor

Where to find it
  • Slide › Slide Show › Monitor and Presenter

Chooses the screen the show is projected on. With a single screen there is nothing to choose; with a projector attached, Automatic sends the show to the projector and leaves your machine free.

  1. Click Monitor.
  2. Look at the map: it draws your screens the way they are actually arranged.
  3. Pick a screen, or leave Automatic — which names the screen it picked.
  4. Click OK, then start the show.

Tip Projecting onto another screen moves the window there, so Presenter View stays off for that show: with a single window the notes would sit in front of the audience.

Always Use Subtitles

Where to find it
  • Slide › Slide Show › Subtitles

Shows what you say as subtitles at the bottom of the screen while you present, so the room can read along. The choice sticks: every show you start from now on is subtitled.

  1. Select Always Use Subtitles.
  2. Start the show and allow the microphone when the browser asks.
  3. Speak: the words appear in a band at the bottom of the screen.
  4. The last words are dimmer because they may still change as you finish the sentence.

Tip The band is always two lines tall and clears after a few seconds of silence. Subtitles use the language chosen in Subtitle Settings, or the interface language if none is chosen; the microphone switches off as soon as you leave the show.

Subtitle settings

Where to find it
  • Slide › Slide Show › Subtitles

Chooses the language you speak in, the language the subtitles are read in, and where they sit on screen. Position is not just a place: below or above the slide the slide shrinks to make room, overlaid they cover its edge.

  1. Click Subtitle settings.
  2. Look at the preview at the top: it shows the slide and the subtitle band in their true proportions.
  3. Pick one of the four positions: the line underneath explains what it does.
  4. Click Spoken language and choose the language you will present in.
  5. If the room reads another language, also choose Subtitle language.
  6. Click OK.

Tip The spoken language matters most: if it is wrong the subtitles are not inaccurate, they are nonsense. Translating into another language shows only sentences already confirmed, so with a small delay.

Play Audio Comment

Where to find it
  • Slide › Recording

Decides whether the voice recorded inside the presentation will be heard while you present. It concerns audio comments only: music or a sound you inserted yourself on a slide keeps playing either way. Audio Comments…, the item that follows it, opens the list of the voices the file carries, one row per slide, and lets you listen to them before you present.

  1. Find Play Audio Comment.
  2. Click Play Audio Comment to tick or untick it: ticked, the voices will be heard during the show.
  3. Choose Audio Comments…, the item that follows it, to see which slides carry a voice.
  4. Select a row and press Listen to hear it; press it again to stop.
  5. Close the window when you are done: listening stops with it.

Tip Two things silence a voice without warning, and the window tells you beforehand: “Not in the file” means the presentation points at an external audio that may be gone by the time you present; “Format not playable here” means that format cannot be heard in this browser, which is typical of recordings made with older versions of PowerPoint.

From Beginning

Where to find it
  • Slide › Recording › Record

Opens the slide show recording with the plan that starts at the first slide. It is the same command as Record.

  1. Click From Beginning.
  2. Click Start recording and allow the microphone.
  3. After the countdown, present as usual.
  4. Press Esc to finish and listen back to what you recorded.

Tip You can still change the plan in the window: the Start from the current place tick shows at once which slides stay out.

Record

Where to find it
  • Slide › Recording › Record

Records what you say and do over the slides: one voice take per slide, the pace at which you advance, and the marks you draw. Before anything enters the deck you listen back, and you can leave out a take that came out wrong.

  1. Click Record.
  2. Check the list of slides and, if needed, tick Start from the current place.
  3. Click Start recording and allow the microphone.
  4. After the three-second countdown, present as usual.
  5. Press Esc to finish.
  6. Listen to the takes, clear the tick on any you want to drop, then click Insert.

Tip Recording again replaces the voice already there: how many slides carry one is written in the window before you start. Recording needs the browser version: in the desktop app the command is off.

From Current Slide

Where to find it
  • Slide › Recording › Record

Opens the slide show recording with the plan that starts at the slide you are on. It is the same command as Record.

  1. Go to the slide you want to start from.
  2. Click From Current Slide.
  3. Click Start recording and allow the microphone.
  4. After the countdown, present as usual, then press Esc to finish.

Tip Clearing the Start from the current place tick brings the whole deck back into the plan, and the list above shows it at once.

Preview

Where to find it
  • Slide › Recording

Plays back what the deck already carries from a recording: the voice, the pacing it advances with and the ink drawn while speaking. A window opens first and shows which slides carry something, so you can see where the recording is without walking the deck one slide at a time.

  1. Click Preview.
  2. Choose the slide playback should start from: only slides that carry a recording can be chosen.
  3. Read the band under the list: it names the run that will play and where it ends.
  4. Click Play. Press Esc at any time to stop.

Tip Playback stops where the recording stops, not at the end of the deck: that is what makes it a preview and not a slide show. And it plays the recorded voice and pacing even when the deck is set not to use them while presenting, because those are the very things you are checking.

Clear Recording

Where to find it
  • Slide › Recording

Takes back what a recording left on the slides: the narration, the timings and the ink. Only the narration is ticked on its own, because it is the only one the file can prove came from a recording — the other two are also written by Rehearse Timings, by the transitions and by the pens.

  1. Choose Clear Recording, then where: on the current slide or on all slides.
  2. The window lists what goes and what stays.
  3. Tick Timings or Ink as well if you want those removed too; each row says who else could have written them.
  4. Click Clear. A single Ctrl+Z brings everything back.

Tip The command is greyed out when the deck carries no recording at all: there would be nothing to show you.

Reset to Cameo

Where to find it
  • Slide › Recording

Replaces a recorded narration with the live camera: the voice leaves the slides it was recorded on, and wherever a slide has no cameo, one comes in — with the shape, the mirroring and the place of the cameo the deck already carries, or a round one in the bottom-right corner. The timings of the take go too, unless you keep them. Ink is not touched.

  1. Choose Reset to Cameo, then where: on the current slide or on every narrated slide.
  2. Read the window: the Camera section shows the cameo that comes in and where it will sit, and the list says for each slide whether the camera arrives or is already there.
  3. Untick Timings if you want the slides to keep advancing on their own.
  4. Click Reset. A single Ctrl+Z brings the narration back and removes the cameos.

Tip The command is greyed out when no slide carries a recorded narration: with timings only there is nothing to replace with the camera — Clear Recording removes those.

Export to Video

Where to find it
  • Slide › Recording

Saves the presentation as an MP4 video, with its transitions, animations, recorded timings and narrations. Before creating the video, a window shows how long it will last, slide by slide, so you can see the effect of each choice before encoding anything.

  1. Click Export to Video.
  2. Choose the quality: the size of each option follows the proportion of your slides.
  3. If the presentation carries recorded timings or narrations, choose whether to use them, and set the seconds for the slides without a recorded timing.
  4. Point at the bar to see why a slide lasts as long as it does, then click Export.
  5. When the video is ready, click Save video.

Tip Click animations play by themselves in the video, spread evenly over the time the slide stays on screen, as in PowerPoint. While the export runs you can stop it at any time: nothing is saved until you click Save video.

Insert Layout

Where to find it
  • Slide › Slide Master
  • Shortcut menu

Adds a new layout under the current master, ready for you to place its boxes. Use it when none of the existing layouts fits the slide you have in mind.

  1. Click Insert Layout.
  2. Select the new layout in the list at the side.
  3. Add the boxes it needs with Insert Placeholder.
  4. Give it a name with Rename Layout so you can find it later.

Tip The new layout takes its look from its master, so settle the master first and the layout second.

Insert Slide Master

Where to find it
  • Slide › Slide Master
  • Shortcut menu

Adds a second master to the presentation, with its own family of layouts. Use it when one deck has to carry two distinct looks.

  1. Click Insert Slide Master.
  2. Select the new master in the list at the side.
  3. Set the look it should give the slides that use it.
  4. Add or adjust the layouts that hang beneath it.

Tip Turn on Preserve Master so the new master survives while no slide is using it yet.

Insert Placeholder

Where to find it
  • Slide › Slide Master
  • Shortcut menu

Draws a box on the layout that slides will fill with their own content. It is how a layout says where the title, the text or the picture goes.

  1. Select the layout you want to change.
  2. Click Insert Placeholder.
  3. Drag on the layout to draw the box.
  4. Size and position it, then check it against a slide that uses the layout.

Tip A placeholder belongs to the layout, not to one slide, so every slide on that layout gets the box.

Preserve Master

Where to find it
  • Slide › Slide Master
  • Shortcut menu

Keeps a master in the presentation even when no slide is using it. Turn it on for a master you have prepared but not applied yet.

  1. Select the master in the list at the side.
  2. Click Preserve Master.
  3. Leave the master view and check the master is still there.
  4. Add slides that use it, or leave it in place for later.

Tip Without it, a master that no slide uses can quietly disappear from the deck.

Duplicate Layout

Where to find it
  • Slide › Slide Master
  • Shortcut menu

Copies the selected layout, boxes and all, so you can vary it without losing the original. The quick way to make a near-twin.

  1. Select the layout you want to copy in the list at the side.
  2. Click Duplicate Layout.
  3. Rename the copy so the two do not get confused.
  4. Change the copy to suit the slides it is meant for.

Tip Duplicating is safer than editing a layout slides already use, because those slides change with it.

Rename Layout

Where to find it
  • Slide › Slide Master
  • Shortcut menu

Gives the layout a name that says what it is for. The name is what you read when a slide picks its layout, so a clear one saves hunting.

  1. Select the layout in the list at the side.
  2. Click Rename Layout.
  3. Type the new name.
  4. Confirm it and check the name in the list.

Tip Name a layout by the job it does, such as the section opener, rather than by what it looks like.

Delete

Where to find it
  • Slide › Slide Master
  • Shortcut menu

Removes the selected layout, or the selected master. Use it to clear out what the deck never uses.

  1. Select the layout or the master you want to remove in the list at the side.
  2. Click Delete.
  3. Check the slides that were using it still look right.
  4. Undo the deletion if something has changed that should not have.

Tip Deleting a master takes the layouts beneath it too, so look at what hangs there first.

Close Master View

Where to find it
  • Slide › Slide Master

Leaves the master view and returns you to the slides themselves. Everything you set on the masters is already in force.

  1. Finish the changes you are making to the masters and layouts.
  2. Click Close Master View.
  3. Look through the slides and check they picked up the changes.
  4. Go back into the master view if something still needs adjusting.

Tip A change to a master reaches every slide that uses it, so scan the whole deck and not just the first slide.

Back to the guide

Productivity, made in Italy.

Bring the whole suite to your team — simple, secure and entirely yours.