Teatrys guide

Object

The step-by-step guide to every command in the Object menu of Teatrys.

Arrange

Where to find it
  • Object › Arrange
  • Pane › Shape

Arrange settles how the objects on a slide relate to one another: which sits in front, how they line up, and whether they move as one. Reach for it whenever shapes overlap or need squaring up.

  1. Select the objects you want to arrange.
  2. Click Arrange.
  3. Choose the ordering, alignment or grouping you want from the menu.

Tip Select more than one object before you open the menu: aligning and grouping need something to work between.

Arrange

Where to find it
  • Object › Arrange
  • Pane › Shape

Opens the arrange menu for the table as an object: stacking order against the other shapes on the slide, alignment to the slide, rotation and flipping, and grouping.

  1. Select the table.
  2. Click Arrange.
  3. Choose the command you need from the menu.
  4. Use Bring to Front or Send to Back to change what covers what.

Header Row

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Marks the top row as the table's heading, so the table style gives it emphasis of its own. Turn it on when the first row names the columns.

  1. Click the table on the slide to select it.
  2. Click Header Row.
  3. Check the top row has taken the heading look.
  4. Click Header Row again to turn it off.

Tip The command is only on while a table is selected or the cursor is in one of its cells; away from the table it stays grey and, if you press it, tells you why.

Banded Rows

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Shades alternate rows so the eye can follow a line right across the table. Worth turning on once a table runs to more rows than people can track.

  1. Click the table on the slide to select it.
  2. Click Banded Rows.
  3. Read a row across to check the shading helps rather than distracts.
  4. Click Banded Rows again to go back to plain rows.

Tip Banded Rows and Banded Columns can both be on, but shading both ways makes a busy table — band the direction people read.

Total Row

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Closes the table with a row for the totals and gives it the emphasis the table style reserves for it. Turn it on for tables that end in a sum.

  1. Click the table on the slide to select it.
  2. Click Total Row.
  3. Type the totals into the row Teatrys now emphasises.
  4. Click Total Row again to drop that emphasis.

Tip The option decides how the closing row looks; the figures in it stay yours to type and keep up to date.

First Column

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Gives the leftmost column emphasis of its own, the way Header Row does for the top row. Use it when the first column labels the rows.

  1. Click the table on the slide to select it.
  2. Click First Column.
  3. Check the labels down the left now stand out from the figures.
  4. Click First Column again to turn it off.

Tip Header Row and First Column together frame the table on two sides, which is emphasis enough for most slides.

Banded Columns

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Shades alternate columns so a table read downwards keeps its columns apart. The vertical twin of Banded Rows.

  1. Click the table on the slide to select it.
  2. Click Banded Columns.
  3. Check the columns are easier to tell apart.
  4. Click Banded Columns again to return to plain columns.

Tip Band the columns when the table has many narrow ones; band the rows when it is long rather than wide.

Last Column

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Gives the rightmost column emphasis of its own, usually because it holds the figure the audience is meant to look at.

  1. Click the table on the slide to select it.
  2. Click Last Column.
  3. Check the right-hand column now stands out.
  4. Click Last Column again to turn it off.

Tip Last Column and Total Row emphasise the two places a total can sit — turn on the one that matches your table.

Table Styles

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Applies a complete ready-made look to the table in one click — colours, banding and heading emphasis together. The quickest way to make a pasted table match the deck.

  1. Click the table on the slide to select it.
  2. Click Table Styles.
  3. Pick a look from the gallery that opens.
  4. Pick another if the first is too heavy; the new style replaces it.

Tip The style sets the palette; Header Row, Total Row, Banded Rows, First Column, Last Column and Banded Columns decide which rows and columns get the emphasis.

Shading

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Paints a background colour behind the cells you have selected, for when the banding of a table style is not the emphasis you want.

  1. Select the cells you want to paint.
  2. Click Shading.
  3. Choose a colour from the palette that opens.
  4. Select other cells and repeat to paint those too.

Tip Shading colours only the selected cells: the rest of the table keeps its table style.

Borders

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Draws lines around the selected cells — the outline of the table, the rules between rows, or one single edge.

  1. Select the cells you want to line.
  2. Click Borders.
  3. Choose which edges to draw from the menu that opens.
  4. Open the menu again to change or clear the lines.

Tip Borders acts on the selection, so select the whole table first if the lines are meant to go all the way round.

Draw Table

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Turns the pointer into a border pen, so you can put a line exactly where you want it instead of setting borders cell by cell.

  1. Click the table you want to draw on.
  2. Click Draw Table.
  3. Click the cell edge where you want a line.
  4. Click Draw Table again when you have finished.

Tip Set Pen Color and Pen Weight first — the pen draws with whatever is armed.

Pen Color

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Sets the colour the border pen puts down. Choose it before you draw, or the next line takes the colour already armed.

  1. Click the table you want to draw borders on.
  2. Click Pen Color.
  3. Choose one of the eight colours.
  4. Click Draw Table.
  5. Click the cell edges you want in that colour.

Tip The colour stays armed for every line you draw next, so set it once and draw several borders.

Pen Weight

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Sets how thick the border pen draws. A heavier stroke turns a line into a division the audience notices from the back of the room.

  1. Click the table you want to draw borders on.
  2. Click Pen Weight.
  3. Choose a thickness from the menu that opens.
  4. Click Draw Table.
  5. Click the cell edges you want at that weight.

Tip Keep the heavy weights for the outline and the rule under the headings, and thin ones for the lines inside the table.

Eraser

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Removes border lines you have drawn by hand: switch it on, then click the lines you want gone.

  1. Click the table with the borders you want to remove.
  2. Click Eraser.
  3. Click each border line you want to rub out.
  4. Click Eraser again to put it away.

Tip The eraser stays on until you switch it off, so a stray click carries on removing lines.

Select

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Chooses what the next command acts on: one cell, a whole column, a whole row, or the table as an object. Clicking in a cell already picks that cell; this menu reaches the other three without dragging across the table.

  1. Click inside the table.
  2. Click Select.
  3. Choose Select Cell, Select Column, Select Row or Select Table.
  4. The next command applies to what you chose.

Tip Select Table selects the table as an object: from there you can move it, resize it, delete it, or use Arrange.

View Gridlines

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Draws a faint dashed line along every cell edge that has no border, so you can see where rows and columns are. It is a view aid: it is never printed, never exported to PDF and never shown during a slide show.

  1. Click inside the table.
  2. Click View Gridlines.
  3. The cell edges without a border appear as dashed lines.
  4. Click it again to turn them off.

Tip The setting belongs to the application, not to the file: turning it on does not change the presentation.

Delete Row

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Takes a whole row out of the table, with everything in it. Use it to drop a line you no longer present.

  1. Click in any cell of the row you want to remove.
  2. Click Delete Row.
  3. Check the rows below have moved up as you expected.

Tip The text in the row goes with it; undo brings both back if you delete the wrong one.

Delete Column

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Takes a whole column out of the table, with everything in it. The horizontal twin of Delete Row.

  1. Click in any cell of the column you want to remove.
  2. Click Delete Column.
  3. Check the columns to the right have closed the gap.

Tip Deleting a column is quicker than emptying it, and it leaves the table narrower rather than half blank.

Delete Table

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu
Delete

Takes the whole table off the slide, with everything in it. Use it when the table itself is no longer part of the story.

  1. Click the table on the slide, or click in any of its cells.
  2. Click Delete Table.
  3. The table leaves the slide; everything else on the slide stays where it is.

Tip It is a single undo step, so Ctrl+Z brings the whole table back if you change your mind. The Delete key does the same whenever the table is selected — the caret in a cell, a block of cells, or the table itself; inside a cell, use Backspace to delete text.

Insert Above

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Adds an empty row directly above the row you are in. The way to slip a line into the middle of a table.

  1. Click in a cell of the row you want the new row above.
  2. Click Insert Above.
  3. Type into the new row.

Tip Each click adds one row, so click again for a second one.

Insert Below

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Adds an empty row directly under the row you are in — the one you reach for while typing your way down a table.

  1. Click in a cell of the row you want the new row under.
  2. Click Insert Below.
  3. Type into the new row.

Tip Check the table still fits the slide after a few rows; a table that runs off the bottom is easy to miss while typing.

Insert Left

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Adds an empty column to the left of the one you are in, for a label or a figure that belongs before the rest.

  1. Click in a cell of the column you want the new column beside.
  2. Click Insert Left.
  3. Type the heading and the values into the new column.

Tip Distribute Columns evens the widths up again once you have added one.

Insert Right

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Adds an empty column to the right of the one you are in — how you extend a table that has run out of room.

  1. Click in a cell of the column you want the new column beside.
  2. Click Insert Right.
  3. Type the heading and the values into the new column.

Tip To add a column at the very end of the table, click in the last column first.

Merge Cells

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Joins the cells you have selected into a single cell — the usual way to run one heading across the columns beneath it.

  1. Drag across the cells you want to join.
  2. Click Merge Cells.
  3. Type the heading into the single cell you now have.

Tip Merge Cells only wakes up once more than one cell is selected, and nothing is thrown away: the text of every cell joined is gathered into the cell that remains.

Split Cells

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Divides a cell into several. On a cell you merged earlier it simply puts the original cells back.

  1. Click in the cell you want to divide.
  2. Click Split Cells.
  3. If the cell was merged, check the original cells are back.
  4. Otherwise say how many rows and columns you want in the dialog that opens, and confirm.

Tip On a merged cell this is the exact reverse of Merge Cells, so a heading that spans too far is quick to put right.

Table Size

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Sets the height and width of the whole table by typing them, for when dragging a corner is not precise enough.

  1. Click the table on the slide to select it.
  2. Click Table Size.
  3. Type the height and the width you want in the dialog that opens.
  4. Confirm to resize the table.

Tip The table scales as a whole, so the columns keep their proportions to one another.

Cell Size

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Sets the height and width of the cell you are in by typing them, for tables where a row or a column has to match an exact measurement.

  1. Click in the cell whose size you want to set.
  2. Click Cell Size.
  3. Type the height and the width in the dialog that opens.
  4. Confirm to apply them.

Tip Height belongs to the whole row and width to the whole column, so the cells beside this one change too.

Distribute Rows

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Gives the rows the same height, tidying a table whose rows have drifted apart after a few edits.

  1. Click the table on the slide to select it.
  2. Click Distribute Rows.
  3. Check the rows now share the height evenly.

Tip The table keeps its overall height — Teatrys only shares it out again between the rows.

Distribute Columns

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table
  • Shortcut menu

Gives the columns the same width. The fastest way to tidy a table after inserting or deleting columns.

  1. Click the table on the slide to select it.
  2. Click Distribute Columns.
  3. Check the columns now share the width evenly.

Tip Even columns read better on a slide people see for a few seconds than columns sized by hand.

Align Left

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Lines the text in the selected cells up on the left of each cell. The natural choice for words and labels.

  1. Select the cells whose text you want to line up.
  2. Click Align Left.
  3. Check the text now starts at the left edge of every cell.

Tip Words read best aligned left; figures usually read better aligned right, so the digits line up.

Center text across the cell

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Puts the text midway between the left and right edges of the cell. Suits a short heading sitting over a column of figures.

  1. Select the cells whose text you want to centre.
  2. Click Center.
  3. Check the text now sits midway across each cell.

Tip Centre the headings if you like, but leave the figures under them aligned right — centred numbers are hard to compare.

Align Right

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Lines the text in the selected cells up on the right of each cell, so digit sits under digit.

  1. Select the cells that hold the figures.
  2. Click Align Right.
  3. Check the numbers now line up on the right edge.

Tip Right alignment is what makes a column of amounts comparable at a glance.

Align Top

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Pushes the text to the top of the cell. Use it when the rows are tall and the text should start on the same line right across the row.

  1. Select the cells you want to align.
  2. Click Align Top.
  3. Check the text now sits against the top of each cell.

Tip The three vertical buttons are exclusive: choosing one releases the one before it.

Align Middle

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Centres the text between the top and the bottom of the cell — the safe default for rows taller than a single line.

  1. Select the cells you want to align.
  2. Click Align Middle.
  3. Check the text now sits midway down each cell.

Tip Vertical and horizontal alignment are independent, so a cell can be aligned middle and right at the same time.

Align Bottom

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Pushes the text to the bottom of the cell, so it rests on the lower edge of the row.

  1. Select the cells you want to align.
  2. Click Align Bottom.
  3. Check the text now rests against the bottom of each cell.

Tip If the text still looks adrift, check Cell Margins — the padding may be holding it away from the edge.

Text Direction

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Turns the text inside the cells, so a narrow column can carry a heading without having to grow wider.

  1. Select the cells whose text you want to turn.
  2. Click Text Direction.
  3. Choose a direction from the menu that opens.
  4. Open the menu again if you want a different one.

Tip Turned headings save width but cost the audience a moment to read, so keep them for the narrowest columns.

Cell Margins

Where to find it
  • Object › Tables, Charts, Media › Table
  • Pane › Table

Sets how much space sits between the text and the edges of the cell. Tight margins fit more rows on the slide; wider ones give the table room to breathe.

  1. Select the cells you want to change.
  2. Click Cell Margins.
  3. Choose a spacing from the menu that opens.
  4. Check the table still fits the slide afterwards.

Tip Cell Margins applies to the selected cells: to change the whole table, select all of it before you choose.

Add Chart Element

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Chooses what the chart shows — title, axis titles, legend, data labels, gridlines, trendline and error bars — in one window that shows the chart while you compose it.

  1. Click the chart.
  2. Press Add Element.
  3. The window lists the seven elements with their current state, and the chart beside them: turn on, turn off or change what you need and watch the preview.
  4. Press OK to apply everything at once, or Cancel to leave the chart as it was.

Tip The preview is the real chart: what you see is what you get. Everything you change in the window forms a single undo step, and the window offers only the elements this chart type can show — a pie has no gridlines, trendline or error bars.

Quick Layout

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Choose the chart's arrangement — legend, data labels and gridlines — in a window that shows each one drawn on your own chart, instead of reading a list of names.

  1. Click the chart.
  2. Press Quick Layout: a window opens with one tile per arrangement, each drawn on your chart.
  3. Pick a tile: the large preview shows it in the frame the chart really has, and under it you read which switches that arrangement sets.
  4. Press Apply. The titles you wrote stay: an arrangement changes what is shown, never what you typed.

Tip The arrangements offered depend on the chart type: a pie has no gridlines, so it offers fewer — and no two of them are ever the same drawing.

Chart Styles

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Changes the overall look of the chart — its background, its frame and its gridlines — without touching the data or the series colours.

  1. Click the chart.
  2. Click Styles. A window opens with your own chart drawn in every style.
  3. Pick a tile: the rows change the background — none, a pale panel, a pale plot area or a dark panel — and the columns change the gridlines — none, values or both axes.
  4. Turn on Frame to add a thin border; every tile is redrawn.
  5. Watch the large preview on the left, then click Apply. Cancel leaves the chart as it was.

Tip Pick the style from the slide the chart sits on, not from the chart: a pale panel separates it from a busy background, while on a slide that is already dense the plain tile usually reads better from the back of the room.

Change Colors

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Chooses the colours of the series in a window that shows them painted on your own chart, with the strip of colours that will be applied alongside.

  1. Click the chart.
  2. Press Change Colors: a window opens with one tile per colour set, each drawn on your own chart.
  3. Pick a tile: the large preview shows it in the frame the chart really has, and below it you read the colours that will be applied.
  4. Press Apply. On a pie or a doughnut the set colours the slices, because there it is the points the reader compares.

Tip Colour sets are built on the accent colours of the theme of the presentation, so the same tile comes out different in a deck with another theme. The window only offers sets that draw something different: on a chart with a single series it offers fewer.

Chart Colors

Where to find it
  • Object › Tables, Charts, Media › Chart

Gives every series of the chart a color — or, in a pie and a doughnut, every slice — picked while you watch the chart change.

  1. Click the chart.
  2. Press Colors.
  3. On the right pick the item to color: every row shows the color it has now.
  4. Pick a color from the palette and watch the preview on the left.
  5. Repeat for the other items, then press Apply.

Tip The palette is built from the presentation's theme colors, so a color picked by hand stays in the same family as the others and as the rest of the slides. Automatic removes the color and gives the item back to the theme. Everything you change before Apply counts as a single undo.

Switch Row/Column

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Chooses how the chart reads its data: which band goes on the axis and which into the legend. The two readings are shown side by side, so you can compare them before applying.

  1. Click the chart.
  2. Click Switch Row/Column: a window opens with the two readings.
  3. Compare the two tiles — each is your own chart in that direction — and read underneath the preview which labels end up on the axis and which in the legend.
  4. Choose Rows and columns swapped and click Apply; choosing As it is now leaves everything as it is.

Tip The title, the legend position, the axis titles, the gridlines and the number format are kept. Colours set on individual series, trendlines and error bars are not: after the swap the series are different things, so they go back to automatic — and the window tells you before you apply. The command is off on pie, scatter and stock charts, where swapping would take away what the chart says.

Edit Data

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart
  • Shortcut menu

Opens the table behind the chart: one row per category, one column per series, with the chart next to it changing as you type. Editing the data touches the numbers only — title, legend, colours and style stay as they are.

  1. Click the chart.
  2. Press Edit Data.
  3. Move with the arrow keys: the chosen cell shows its contents highlighted, and typing replaces them. Press Enter to drop down one row, Tab to move to the next cell.
  4. To correct a value instead of rewriting it press F2, or click inside the cell you are already on: a text cursor appears, the left and right arrows move between characters, Shift selects, and Ctrl+C, Ctrl+X and Ctrl+V work as in any other box. Esc puts the original value back without closing the window.
  5. The series names and the category labels are text boxes too: you type in them just like in the number cells, and only the top-left corner is fixed.
  6. Insert row and Insert series add where the cursor is; Delete row and Delete series remove what it sits on.
  7. Press Apply: the chart redraws on the new numbers and keeps everything else.

Tip Ctrl+Enter applies from any cell, without reaching for the button. The command is off on scatter and bubble charts and on the newer chart types: their numbers do not fit a single category column. Everything else — area, radar, stacked, combined and stock charts — can now be edited, including charts that came from PowerPoint.

Change Chart Type

Where to find it
  • Object › Tables, Charts, Media › Chart

Turns the chart into another type, keeping the same figures. A window shows every type drawn on your own chart, and says what the conversion will remove before you apply it.

  1. Click the chart.
  2. Press Change Type: a window opens with one tile per type, each one your own chart already converted, grouped by family.
  3. Choose a tile, read the outcome under the preview — series kept, series removed, axes — then press Apply.

Tip Before choosing Pie or Doughnut, look at Series removed: those types show one series only, so the others are dropped. The tile of the type the chart already has keeps a thin outline, so you can always go back.

Chart Element

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Chooses which part of the chart the fill and outline commands apply to. It opens a window showing your chart: the part in force is ringed on it, and you pick another by clicking it.

  1. Click the chart.
  2. Click Selection.
  3. The window shows your chart on the left and the list of its parts on the right.
  4. Click a part on the chart itself, or pick its row: the chart area is the whole box, the plot area is only the rectangle the series are drawn in.
  5. Each series row carries the colour the chart paints for it; on a pie the list shows the slices.
  6. Click Select. Now use Fill and Outline: they act on what you picked.

Tip Under the chart the window says in advance what you will be able to change: Fill and outline on an area, Fill only on a series. A series has no outline that the chart draws, so Outline stays greyed out there.

Open the chart Format pane

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Opens the panel that holds the fine detail of the chart, beyond what the other chart commands cover. Use it when a chart is nearly right and one element still needs work.

  1. Select the chart on the slide.
  2. Click Format Pane.
  3. Select the part of the chart you want to change.
  4. Set the options in the panel and watch the chart as you go.

Tip Try Add Element first: the common changes are one click away there.

Reset to Match Style

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Opens a window that shows what will be cleared before it is cleared: the chart as it is now, above the chart it would become.

  1. Click the chart.
  2. Click Reset Style. The button is greyed out when the chart carries no formatting of its own.
  3. The list shows one row for every thing the chart carries — Chart Area, Plot Area, Colors — and every row starts ticked: untick what you want to keep and watch the lower picture change.
  4. Click Restore. What you wrote is kept: title, axis titles, legend, data labels, gridlines and the data itself.

Tip Background and frame are the style chosen in the Chart Styles gallery: untick Chart Area to keep the style and clear only the colours set by hand. Either way it is a single undo step.

Chart Element Fill

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Fills the part of the chart you choose with a solid colour, in a window that shows the result on the real chart before you apply it.

  1. Click the chart.
  2. Click Shape Fill.
  3. In the list, pick what to fill: the chart area, the plotted area, or a series — on a pie, one slice.
  4. Pick a colour from the palette, or the entry above it that leaves the part without a fill, then press Apply.

Tip On a pie or a doughnut the colour belongs to the slices and not to the series, so the list shows one row per slice. On a series that entry is called Automatic: it removes the colour instead of setting one, and the series goes back to following the presentation theme.

Chart Element Outline

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Sets the border of the chart area or the plot area: colour, weight and dash pattern together, in one window that shows the chart while you choose.

  1. Click the chart.
  2. With Chart Element, pick the chart area or the plot area.
  3. Click Shape Outline.
  4. Choose a colour, a weight and a dash pattern; the preview shows the chart as it will look.
  5. Click Apply, or No Outline to take the border away.

Tip Automatic and No Outline are not the same answer: Automatic drops the setting and lets the chart style decide again, while No Outline records that you took the border off. A theme colour keeps following the document theme if you change it later; a standard colour does not.

Chart Element Effects

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Adds a shadow or a glow to the chart area or the plot area: two axes that combine, in one window that shows the chart while you choose.

  1. Click the chart.
  2. With Chart Element, pick the chart area or the plot area.
  3. Click Shape Effects.
  4. Pick a direction in the shadow grid, or a tint in the glow row; the sliders set transparency, size and distance.
  5. Click Apply.

Tip The centre cell of the grid switches the shadow off, and the None row does the same for the glow, so you can turn one off without losing the other. An area shrinks a little to make room for its own halo: that is why a chart gets slightly smaller when you give it a shadow, and why the effect never spills onto the slide.

Chart Text Colour

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Sets the colour of the text a chart draws — all of it at once, or one part such as the title, the legend or the data labels — in a window that shows the result on the real chart and says when the text would be hard to read.

  1. Click the chart.
  2. Click Text Fill.
  3. In the list, pick what to colour: all the chart text, or one part such as the chart title, the axis labels, the legend or the data labels.
  4. Pick a colour from the palette, or Automatic to hand the choice back to the app, then press Apply.

Tip The list shows only the parts this chart actually draws: a pie has no axis labels, and a chart without a title has no title row. All chart text is the default every part follows until you give that part a colour of its own.

Chart Text Outline

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Outlines the letters of the chart text — the title, the axis titles, the axis labels, the legend, the data labels — with a colour, a weight and a dash pattern chosen while you look at the chart.

  1. Click the chart.
  2. Click Text Outline.
  3. Pick which text you are dressing: all the chart text, or one of the texts the chart actually paints.
  4. Choose a colour, a weight and a dash pattern; the preview shows the chart as it will look.
  5. Click Apply, or No Outline to take the outline away.

Tip The same weight is a hairline on a 14 pt title and a blot on 9 pt axis labels, because the stroke grows half-way inside the letters. The window measures the outline against the body the chart actually paints, and says so when the counters are closing.

Bring Forward

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Moves the chart one step up the stack of objects on the slide, so it covers what it used to sit behind.

  1. Click the chart.
  2. Click Bring Forward.
  3. Repeat until the chart is in front of the object you want it to cover.

Tip Moving one object forward always moves it relative to the others: the result depends on where they were, not only on where this one was. To see the whole stack at once, open the Selection Pane.

Send Backward

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Moves the chart one step down the stack of objects on the slide, so what was behind it comes in front.

  1. Click the chart.
  2. Click Send Backward.
  3. Repeat until the chart is behind the object that should cover it.

Tip If the chart disappears behind something opaque, use the Selection Pane to get it back: an object you cannot click is still listed there.

Selection Pane

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Opens the list of the objects on the current slide, which is the way to reach a chart buried under another object or hidden.

  1. Select any chart.
  2. Click Selection.
  3. Click a row to select that object, even if you cannot click it on the slide.
  4. Click the eye at the end of a row to hide or show that object.

Tip The list reads top to bottom as the stack you are looking at. Hiding an object takes it off the slide show and the printout as well, and the pane is the only way to bring it back.

Alt Text

Where to find it
  • Object › Tables, Charts, Media › Chart
  • Pane › Chart

Writes the description that reaches a reader who does not see the chart — a screen reader, or anyone following the deck without the slides.

  1. Click the chart.
  2. Click Alt Text.
  3. Write one or two sentences saying what the chart shows, not what it is: the point the audience would take from it.
  4. Click OK.

Tip Say the conclusion, not the machinery: "Sales grew every quarter of 2026, doubling by December" tells the listener what the chart tells everyone else, while "column chart with four series" does not.

Playback settings (start, volume, loop)

Where to find it
  • Object › Tables, Charts, Media › Video and Audio
  • Pane › Video and Audio
  • Shortcut menu

Gathers the main playback choices in one place: when the media starts, how loud it is and whether it repeats. Start here when several of them need changing.

  1. Select the sound or the film on the slide.
  2. Click Playback settings (start, volume, loop).
  3. Set the options in the dialog that opens.
  4. Run the slide and check the media behaves as you set it.

Tip The other playback buttons set the same choices one at a time, which is quicker for a single change.

Start playing automatically when the slide is shown

Where to find it
  • Object › Tables, Charts, Media › Video and Audio
  • Pane › Video and Audio

Plays the media as soon as the slide appears, with no click needed. Use it when the sound or the film is part of the slide rather than an aside.

  1. Select the sound or the film on the slide.
  2. Click Start playing automatically when the slide is shown.
  3. Run the show from that slide.
  4. Check the media starts on its own.

Tip Media that starts by itself leaves you nothing to click, so allow for its length when you time the slide.

Loop until stopped

Where to find it
  • Object › Tables, Charts, Media › Video and Audio
  • Pane › Video and Audio

Plays the media over and over instead of once, until you stop it. Made for background music or a short film that should run through the slide.

  1. Select the sound or the film on the slide.
  2. Click Loop until stopped.
  3. Run the show and check the media starts again when it ends.
  4. Move on from the slide to stop it.

Tip A short clip on a loop draws attention to the join, so choose one that ends much as it begins.

Mute the media audio

Where to find it
  • Object › Tables, Charts, Media › Video and Audio
  • Pane › Video and Audio

Plays the media with no sound at all. Use it for a film that illustrates a point while you talk over it.

  1. Select the sound or the film on the slide.
  2. Click Mute the media audio.
  3. Run the show and check nothing is heard.
  4. Speak over the film as you intended.

Tip Muting here is safer than turning down the room's own sound, which affects everything else you play.

Hide the media during the show while it is not playing

Where to find it
  • Object › Tables, Charts, Media › Video and Audio
  • Pane › Video and Audio

Keeps the media out of sight until it plays, so the slide is not spoiled by a still frame sitting in the middle of it. Useful for a sound that has no business being seen.

  1. Select the sound or the film on the slide.
  2. Click Hide the media during the show while it is not playing.
  3. Run the show and check the slide looks right before the media plays.
  4. Check the media is still there when you go back to editing.

Tip Hidden media leaves nothing to click, so pair it with starting the media automatically.

Trim the start and end of the media

Where to find it
  • Object › Tables, Charts, Media › Video and Audio
  • Pane › Video and Audio

Cuts the beginning and the end of the clip so only the part you want plays. Better than making the audience sit through a long lead-in.

  1. Select the sound or the film on the slide.
  2. Click Trim the start and end of the media.
  3. Set where the clip should start and where it should end.
  4. Play it back and adjust the two ends until it is right.

Tip Trim before you time the slide: a shorter clip needs less time on screen.

Merge Shapes

Where to find it
  • Object › Illustrations › Shape

Merge Shapes builds one new shape out of two or more that overlap. It is how you draw a form that no ready-made shape gives you, and a window shows the result before you commit to it.

  1. Select a shape on the slide.
  2. Click Merge Shapes.
  3. Choose a way of combining them from the menu: the window opens with that operation already chosen.
  4. Tick the other shapes, watch the preview, and click Combine.

Tip No menu entry applies anything on its own any more — each one opens the window, because Union and Combine do opposite things where shapes overlap and Fragment can return eight shapes where there were two. What comes out replaces the originals, so undo the merge if you need them back.

Quick Styles

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Quick Styles applies a ready-made look to the selection in one click, instead of setting the fill, the outline and the effects one by one. It is the fast way to keep the shapes across a deck consistent.

  1. Select the shape or the text you want to restyle.
  2. Click Quick Styles.
  3. Choose the look you want from the choices offered.

Tip Shape Fill, Shape Outline and Shape Effects adjust the individual parts afterwards.

Shape Styles

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Applies a coordinated fill and outline in one gesture, using the colours of the current theme so the shape matches the rest of the document.

  1. Click the shape you want to restyle.
  2. Click Shape Styles — the window opens on your own shape.
  3. Pick a style: every tile shows it on the shape you selected, at the size it has on the slide.
  4. If one detail is not right, adjust the fill, the outline colour, its weight or its dashes without leaving the window.
  5. Click Apply.

Tip The tiles use the accents of the deck's theme, and a style chosen from the gallery is written with those theme colours: change the theme later and the shape follows. Adjust an axis by hand and that colour stays exactly as you picked it. A custom dash on the shape appears at the end of the dashes as a choice of its own: a tile or another dash replaces it, any other adjustment keeps it.

Shape Fill

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Shape Fill paints the inside of the selected shape. The arrow next to it offers the other choices of fill.

  1. Select the shape you want to fill.
  2. Click Shape Fill to apply the colour shown on the button.
  3. Click the arrow next to Shape Fill to choose a different fill.

Tip The button keeps the fill you last chose, so giving a second shape the same one takes a single click.

Shape Fill

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Opens a window where you compose the fill of the shape — a solid colour, a gradient or a texture — and see it on the shape itself before you apply it.

  1. Click the shape you want to fill.
  2. Click Shape Fill: the window opens on the fill the shape has now.
  3. Pick a kind — solid colour, gradient or texture — then its colour, and drag Transparency to let through what sits behind the shape.
  4. Click Apply. To leave the shape as an outline only, click No Fill.

Tip Switching kind keeps what you composed in the others: try a gradient, go back to a solid colour, and the gradient is still there when you return. For a quick colour, use the arrow next to the button instead of the window.

Shape Outline

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Shape Outline sets the border drawn round a shape, its colour and how thick it is. The arrow next to it opens the choices.

  1. Select the shape whose border you want to change.
  2. Click Shape Outline to apply the colour shown on the button.
  3. Click the arrow next to Shape Outline to choose another colour or thickness.

Tip Outline Dashes and Outline Arrows set the pattern of that line and what sits at its ends. A custom dash the file carries stays when you change colour or weight: only another dash replaces it, Solid included.

Shape Outline

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Sets the line around the shape: its colour, how thick it is, whether it is dashed, and what its ends look like.

  1. Click the shape whose outline you want to change.
  2. Click Shape Outline: a window opens showing the outline on your own shape, at its real size.
  3. Choose the colour, the weight and the dash pattern; on a line or a connector you can also choose the arrowhead at each end.
  4. Click Apply to write them all as a single change, or No Outline to remove the outline.
  5. Check the outline is still readable at the size the shape is used.

Tip On a line or an arrow the outline *is* the shape: weight and arrowheads are the only things that change how it reads. If the file carries a custom dash, the window shows it as a choice of its own, Custom, drawn with its pattern: colour and weight keep it, while Solid or another dash replaces it.

Shape Effects

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Adds a shadow, a reflection, a glow, soft edges, a bevel or depth to the shape. The six are independent: a shape can carry a shadow and soft edges at the same time. Used on one shape it draws the eye; used on every shape it makes a deck noisy.

  1. Select the shape you want to treat.
  2. Click Shape Effects.
  3. Click Apply to write them all as a single change, or Remove all effects to clear them.

Tip Effects sit on top of the fill and the outline, so settle those first.

Shape Effects

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Adds a shadow, a reflection, a glow, soft edges, a bevel or depth to the shape. The six are independent: a shape can carry a shadow and soft edges at the same time.

  1. Click the shape you want to add effects to.
  2. Click Shape Effects: a window opens showing the effects on your own shape, over the slide background and at its real size.
  3. For the shadow, click the square that shows the direction you want it to fall in; the centre square means no shadow. Then set how transparent, how blurred and how far it is.
  4. Do the same for the other axes: pick a tint for the glow, and drag the sliders for reflection, soft edges, bevel and depth. Each one is separate, so switching one off leaves the others alone.
  5. Click Apply to write them all as a single change, or Remove all effects to clear them.
  6. Check the shape still reads at the size it is used: a large glow or a wide bevel eats into the shape itself.

Tip Effects are measured in points, not in percentages: the same 3 pt shadow is half a small shape and a hairline on a big one. That is why the preview uses your shape's real size.

Edit Points

Where to find it
  • Object › Illustrations › Shape
  • Shortcut menu

Edit Points exposes the points an object is drawn from, so you can drag them and change its outline. Use it to bend a standard shape into the one you actually want.

  1. Select the shape you want to reshape.
  2. Click Edit Points.
  3. Drag a point to move that part of the outline.
  4. Click away from the shape when the outline is right.

Tip Undo puts a point back where it was when a drag goes wrong.

Outline Dashes

Where to find it
  • Object › Illustrations › Shape

Outline Dashes chooses whether the line round a shape is solid, dashed or dotted. A dashed border reads as provisional, a boundary that is not yet fixed.

  1. Select the shape or the line you want to change.
  2. Click Outline Dashes.
  3. Choose the dash pattern you want from the list.

Tip The pattern only shows once the shape has an outline, so give it one with Shape Outline first. Solid, or any other pattern, also replaces a custom dash the file carries.

Outline Arrows

Where to find it
  • Object › Illustrations › Shape

Outline Arrows puts arrowheads on the ends of a line, so it points at what it means. Use it to show flow or direction between the shapes on a slide.

  1. Select the line you want to point.
  2. Click Outline Arrows.
  3. Choose the arrowheads you want from the list.

Tip Either end of the line can carry a head, so pick the arrangement that says which way the relationship runs.

Size and Position

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape
  • Shortcut menu

Size and Position sets an object's measurements by number instead of by dragging. Use it when two objects have to match exactly, or sit in the same place on several slides.

  1. Select the object you want to place.
  2. Click Size and Position.
  3. Set the size, the position and the rotation in the dialog that opens.
  4. Confirm the dialog to apply them to the object.

Tip Giving an object the same position on each slide stops it jumping about as the slide show runs.

Edit Picture

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Opens the picture of the slide in the image editor, where you can paint over it, crop it, straighten it or write on it. The colour and correction commands change only how a picture is displayed; this one changes the picture itself.

  1. Click the picture you want to change.
  2. Click Edit Picture.
  3. The editor opens on the picture: draw, crop, add text or shapes with the tools on its toolbar.
  4. Click Apply to put the changed picture back on the slide, or Cancel to leave it as it was.

Tip The frame keeps its size, position and stacking order: only what is inside it changes, and a single Undo puts the original picture back.

Remove Background

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Finds the subject of a picture and makes everything around it transparent. The window proposes an outline as soon as it opens; you correct it by painting over what to keep and what to remove, and the outline follows.

  1. Click the picture you want to cut out.
  2. Click Remove Background. The window opens and proposes an outline: everything under the magenta veil will be removed.
  3. If part of the subject is missing, choose Mark areas to keep and paint over it; if part of the background survives, choose Mark areas to remove and paint over that. The outline updates after every stroke.
  4. Use Adjust the area to keep when the subject was cut off by the initial frame, and the brush sizes for fine detail.
  5. Click the eye button to see the real transparency instead of the veil, then click Apply.

Tip The result is always saved as a PNG, because transparency needs one. The frame keeps its size, position and stacking order: only what is inside it changes, and a single Undo puts the original picture back.

Erase

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Removes parts of the picture instead of covering them: whatever you erase becomes transparent, so what is behind shows through. It is the way to take a face, a number plate or a background out of a photo — covering it with a white rectangle only works while the background is white. The colour and correction commands change only how a picture is displayed; this one changes the picture itself.

  1. Click the picture you want to change.
  2. Click Erase.
  3. Drag over the picture with the eraser: whatever you go over becomes transparent.
  4. Or choose the wand and click a background: every neighbouring pixel of a similar colour goes at once. The tolerance steps widen or narrow what it takes.
  5. Use the restore brush to bring back anything you removed by mistake, then click Apply to put the erased picture back on the slide, or Cancel to leave it as it was.

Tip An erased picture is saved as PNG even when it arrived as a JPEG, because JPEG cannot hold transparency. The frame keeps its size, position and stacking order: only what is inside it changes, and a single Undo puts the original picture back.

Corrections

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Fine-tunes the sharpness, brightness and contrast of a picture. It is the first thing to try on a photo that looks flat, soft or too dark.

  1. Click the picture you want to correct.
  2. Click Corrections.
  3. A window opens with a large preview, a thumbnail of your picture for every preset and three sliders: drag one until the preview looks right, then click Apply. Reset puts all three back to normal.
  4. For a quick preset, click the arrow next to Corrections instead: pick one of the five sharpness amounts, or a cell of the brightness and contrast grid.
  5. Picture Corrections Options, at the bottom of that menu, opens the same window.

Tip Corrections change how the picture is shown, not the file behind it: to clear them, open the window again and click Reset. On a picture whose sharpness Office has already applied to the pixels, the Sharpen/Soften section shows a note instead of its thumbnails; Brightness/Contrast still works.

Color

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Changes a picture's colour: how strong the colours are, how warm or cool the light looks, and whether the whole picture is retinted in a single hue. Each choice is shown on the picture itself, so you choose what you can already see.

  1. Click the picture you want to change.
  2. Click Color: the Picture Color window opens, with a live preview of your picture beside the settings.
  3. Pick a thumbnail under Color Saturation, Color Tone or Recolor — the three settings are independent, so choosing one keeps the other two — or drag the Saturation and Temperature sliders for an exact value. The preview follows every change.
  4. For a colour the bands do not offer, click More Variations: pick your colour and the window comes back with it applied, so you can still see it before you commit.
  5. Click Apply to put the change on the slide, or Cancel to leave the picture as it was.

Tip Apply stays off until something changes, and Reset takes Saturation, Temperature and Recolor back to the original in one click. Each thumbnail shows your picture under that preset combined with what the other settings already are, so it shows where you would land — not the preset on its own. A recolour in the file that Teatrys cannot draw yet, such as one built on theme colours, stays in the file and PowerPoint shows it; No Recolor removes it. On a picture whose colour saturation and tone Office has already applied to the pixels, the Color Saturation and Color Tone bands show a note instead of their thumbnails; Recolor still works, and a picture replaced with Change Picture can be adjusted again. The saturation and tone you choose here — like sharpness and artistic effects — also show in PowerPoint: the file carries the adjusted picture together with its original, and when you reopen it they are still editable (not for a GIF, BMP or WebP picture, and saving tells you so).

Artistic Effects

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Makes a picture look hand-made — a pencil sketch, a mosaic of bubbles, chalk on paper, canvas. The effect changes how the picture is drawn, never the picture file itself, so removing it gives you the original photograph back.

  1. Click the picture you want to change.
  2. Click Artistic Effects: a window opens with a live preview of your picture beside the twenty-three effects.
  3. Click an effect — the preview shows it on your own photograph straight away.
  4. Fine-tune it with the two sliders under the gallery: the first is named after the effect you chose (Size, Pressure, Number of Shades…), the second is Transparency, which fades the effect back towards the original picture.
  5. Click Apply. To go back to the untouched photograph, click Remove effect.

Tip Every thumbnail shows the effect on your own picture, so you can compare them instead of trying them one by one. The sliders appear only once you have chosen an effect — with None there is nothing to adjust. Apply stays off until something changes, and the whole thing is a single undo step. On a picture whose effects Office has already applied to the pixels, Artistic Effects is greyed out: press it and a window explains why and what to do.

Transparency

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Makes a picture see-through, so whatever sits behind it — the slide, the text, another object — shows through. Use it to turn a photo into a watermark, or to soften a background image so the words on top stay readable.

  1. Click the picture you want to change.
  2. Click Transparency: the Picture Transparency window opens, with a live preview of your picture on the slide background.
  3. Pick one of the seven presets, or drag the Transparency slider for an exact value: 0% is the full picture, 100% is invisible. The preview follows every change.
  4. Click Apply. To make the picture solid again, open the window and click Reset.

Tip The preview sits on the slide's background colour, because a transparency can only be judged against what is behind it. A slide whose background is a gradient shows its average colour, and one with a background picture shows plain white.

Compress Picture

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Makes a picture lighter by storing fewer pixels for it. A photo taken by a phone often carries several times more pixels than the slide can show, and those pixels travel inside the presentation forever: compressing throws away the ones nobody sees. The window shows both sides of the trade at once — how many bytes you save, and how the picture looks once it has been reduced.

  1. Click the picture you want to compress.
  2. Click Compress Picture.
  3. Pick a resolution: each row shows the pixels it leaves and the bytes it costs for this picture.
  4. Drag the handle across the preview to compare: the original is on the left, the compressed picture on the right.
  5. Click Apply.

Tip The byte size in each row is measured by encoding the picture for real, not estimated. Targets finer than the picture already is are not listed, because they would only make the file bigger. Compressing never moves the picture on the slide: it changes how many pixels it stores, not how big it is shown.

Change Picture

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Replaces the selected picture with a different one, keeping its position and formatting. You choose the new picture from your device, Aerarys or your Photos library, and then decide how it goes into the frame the old one occupied — seeing the result before you confirm it.

  1. Click the picture you want to replace.
  2. Click Change Picture: the picture chooser opens on the source you used last. The arrow next to it goes straight to This Device, From Aerarys or From Photos.
  3. Choose the new picture: the Change Picture window opens and shows the frame your picture occupies with the new picture inside it.
  4. Choose how it fits. Fill the frame keeps the frame exactly as it is and crops what is left over; Fit in the frame shows the whole picture and shrinks the frame around it; Original size gives the picture its own size. Each option shows the size it produces.
  5. With Fill the frame you can drag the picture to move it inside the frame and scroll to zoom in; Recentre puts the framing back where it started.
  6. Click Replace: the new picture takes the place of the old one.

Tip Border, effects, alt text and position stay as they are — only the picture changes. Fill the frame is the only choice that leaves your layout exactly where it is, which is why it is the one you start on. Ctrl+Z brings the old picture back in a single step. When the frame changes size, the picture stays centred where it was: a picture in the middle of the slide stays in the middle.

Reset Picture

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Puts a picture back the way it came in, dropping every change you have made to it. Use it when a run of adjustments has gone the wrong way.

  1. Click the picture you want to restore.
  2. Click Reset Picture: the Reset Picture window opens.
  3. Compare the two previews — Now and After restoring — and read the list of adjustments the picture carries.
  4. Every adjustment starts ticked: clear the tick of anything you want to keep.
  5. Click Restore. Everything left ticked goes back at once, in a single undo step.

Tip The command stays greyed out on a picture that carries no adjustment: there would be nothing to restore.

Picture Styles

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Puts the picture inside a ready-made frame: a white border with a soft shadow, rounded corners with a reflection underneath, an oval with soft edges. You choose by looking at twenty-two frames on your own photo, then move away from any of them with the controls underneath.

  1. Click the picture you want to frame.
  2. Click Picture Styles: the window opens with a live preview of your picture and twenty-two frames applied to it.
  3. Click a frame to apply it whole, then adjust it with the controls below: Shape, Border colour and width, Shadow, Reflection and Soft edges.
  4. Click Apply. To go back to the bare picture, open the window and click Remove frame.

Tip The preview shows the frame at the size the picture really has on the slide: a 7 pt border is half the height of a small photo and a hairline on a full-slide one.

Picture Border

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Draws a line around a picture. The Picture Border window shows the border on your own picture, at the size it will have on the slide, and lets you choose its colour, weight, dash pattern and compound type independently of one another.

  1. Click the picture you want to frame.
  2. Click Picture Border. The window opens with your picture on the left.
  3. Choose a colour, a weight, a dash pattern and a compound type. Each one changes only its own axis, so you can combine them freely.
  4. Watch the preview, then click Apply. Remove border takes the border away.

Tip Weights are drawn at their real thickness and dash patterns as drawings, so hover a cell to read its name; on a weight the tooltip gives the value in points.

Picture Effects

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Adds a shadow, a reflection, a glow, soft edges or a bevel to a picture, so it reads as an object placed on the slide rather than as part of it. The five effects are independent: a picture can carry a shadow and soft edges at the same time.

  1. Click the picture you want to change.
  2. Click Picture Effects.
  3. In the Shadow grid, click the square on the side you want the shadow to fall on; the middle square takes the shadow away.
  4. Use the sliders for transparency, size and distance, and the sections below for reflection, glow, soft edges and bevel.
  5. Click Apply. Remove all effects, at the far left, clears all five at once.

Tip Every slider is live: dragging one up from zero switches its effect on with sensible values, and taking transparency to 100% switches it off again — so you can try an effect and take it away without leaving the window.

Picture Layout

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Turns the picture into a diagram with a caption: the photo keeps its size and gains a text band below, above, beside or over it. You choose the arrangement by seeing it on your own picture, and type the caption in the same window.

  1. Click the picture you want to arrange.
  2. Click Picture Layout. You can also click the small badge that appears next to the selected picture.
  3. The window opens with a live preview of your picture and four arrangements: caption below, caption above, caption beside and caption over the picture.
  4. Click an arrangement — the preview updates, showing the shape the figure will really have on the slide.
  5. Type the caption in the box underneath, then click Apply.
  6. To change the arrangement or the caption later, select the figure and click Picture Layout again: the window reopens on the current arrangement, and Remove layout turns it back into a plain picture.

Tip The picture keeps the size it had: the diagram grows by the height of the caption band instead of shrinking the photo to make room for the text. Converting is a single undo step.

Alt Text

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Stores a short written description of an object for people who cannot see it. The dialog shows the object beside the box you describe it in, and lets you mark it as decorative instead — something a screen reader should skip.

  1. Click the picture or shape you want to describe.
  2. Click Alt Text.
  3. Type a description in the large box: the object is shown next to it, and a line underneath points out anything worth fixing.
  4. For an object that carries no meaning — a divider, a flourish — tick Mark as decorative instead: screen readers will skip it and no description is needed.
  5. Choose OK to store your choice with the object.

Tip Describe what the object means in its context, not what it literally shows — the description is heard in place of the picture, not alongside it. One or two sentences are usually enough, and the counter under the box shows how far you are from that.

Bring Forward

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Moves a picture up the stack of the slide, so it covers the shapes it used to sit under.

  1. Click the picture that is being covered.
  2. Click Bring Forward.
  3. To send it straight to the front, click the arrow next to Bring Forward and choose Bring to Front.
  4. Repeat until the picture sits where you want in the pile.

Tip The stacking order also drives the order in which animations reveal the objects of a slide.

Send Backward

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Moves a picture down the stack of the slide, so the shapes around it show through. The counterpart of Bring Forward.

  1. Click the picture you want to move back.
  2. Click Send Backward.
  3. To send it straight to the back, click the arrow next to Send Backward and choose Send to Back.
  4. Repeat until the objects overlap the way you want.

Tip A full-slide photograph usually wants to be at the very back, with the text placeholders above it.

Selection pane

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Opens a side pane listing every object on the current slide — placeholders, pictures, shapes, tables, charts, media and pen strokes. Click a row to select that object, or use the eye to hide it. It is the only way to reach an object buried under another one, or one you have already hidden.

  1. Click Selection Pane.
  2. Click a row in the pane to select that object on the slide.
  3. Click the eye at the end of a row to hide or show that object.
  4. Use Show All or Hide All to work on the whole slide at once.
  5. Click a row again, or close the pane, when you are done.

Tip The list follows the slide you are on, and reads top to bottom as the stack you are looking at: the last row is the object in front. Hiding an object takes it off the slide show and the printout as well, and the pane is the only way to bring it back — every step can be undone.

Align

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Puts the selected picture against an edge of the slide, or centres it there. Both directions are chosen in the same window and applied together, and the preview shows where the picture will land before anything has moved.

  1. Click the picture you want to move.
  2. Click Align. The window opens and nothing has moved yet.
  3. The Relative to row names the frame you are aiming at: Slide, the whole slide from edge to edge.
  4. Pick a Horizontal alignment, a Vertical one, or both — each axis can be left Unchanged, which is how you move a picture sideways without moving it up or down.
  5. Watch the preview: the dashed rectangle is the frame, and the solid rectangle is where the picture will land.
  6. Click Align. Both axes are applied together, so one undo puts everything back.

Tip A rotated picture is aligned by the box you can actually see, not by its unrotated size — so a tilted picture lands inside the slide instead of straddling its edge. The arrow next to Align still holds the six quick alignments.

Group

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Ties a picture together with the other objects on its slide, so they move, rotate and are deleted as one. The window is where you say which objects go together — and the frame on the map shows the shape of the group before it is made.

  1. Click the picture you want to group.
  2. Click Group. The window opens with the objects of that slide; the picture you started from is already in the group and has no check box.
  3. Tick every object that belongs with it — in the list or straight on the map. The frame grows to show what the group will cover.
  4. Read the sentence above the buttons: it says how many objects the group will hold.
  5. Click Group. From then on, moving, rotating or deleting one member moves, rotates or deletes them all, with a single undo.
  6. The arrow next to Group leads to Ungroup, which takes the group apart again.

Tip The command is grey when the slide holds nothing else to group with: a group of one object is that object. To change an existing group, open the window again — its current members start ticked, so you add and remove in a single step.

Rotate

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Opens a window where you turn the picture by dragging a dial and read the angle in degrees as you go — any angle, not only quarter turns — and where you can flip it to its mirror image. The arrow next to the button keeps the four quick ways.

  1. Click the picture you want to turn.
  2. Click Rotate.
  3. Drag the dial to the angle you want, or use − and + to step one degree at a time.
  4. Use the quarter-turn buttons for an exact 90° or 180°, and Flip to mirror the picture.
  5. Click Rotate to apply, or Straighten to bring it back upright.
  6. Check the picture still sits inside the slide once it has turned.

Tip Straighten clears the angle and both flips in one go. To straighten a scan that came in slightly askew, drag the dial a little and fine-tune with − and +: the dial does not snap.

Crop

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Cuts away the edges of a picture so only the part you want is left. Crop opens a window showing the whole picture, with the part you are cutting away dimmed rather than hidden — so putting a piece back is as easy as taking it off. The picture is never squashed: the frame follows the crop, so what stays keeps the size it had on the slide.

  1. Click the picture you want to crop.
  2. Click Crop.
  3. Drag inside the crop window to move it, or drag a corner or edge handle to resize it.
  4. To cut to a set shape, pick one under Proportions — Square, 4:3, 16:9 and the others apply straight away.
  5. Click Crop to apply. Remove crop, in the window, puts the whole picture back.

Tip Cropping never touches the stored image: removing the crop brings back everything you cut away.

Height

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Sets how tall the picture is on the slide. The Picture Size window shows width and height together with the scale of the original picture, so you can also ask for half the size or go back to the original.

  1. Click the picture you want to resize.
  2. Click Height: the Picture Size window opens with the cursor in the Height box.
  3. Type the value you want and press Tab: with Lock aspect ratio on, the other side follows and the picture is not squashed.
  4. To resize by proportion instead, type a percentage in Scale height: 50 makes the picture half the size of the original.
  5. Click Apply.

Tip When the frame changes size, the picture stays centred where it was: a picture in the middle of the slide stays in the middle.

Width

Where to find it
  • Object › Illustrations › Picture
  • Pane › Picture

Sets how wide the picture is on the slide. The Picture Size window shows width and height together with the scale of the original picture, so you can also ask for half the size or go back to the original.

  1. Click the picture you want to resize.
  2. Click Width: the Picture Size window opens with the cursor in the Width box.
  3. Type the value you want and press Tab: with Lock aspect ratio on, the other side follows and the picture is not squashed.
  4. To resize by proportion instead, type a percentage in Scale width: 50 makes the picture half the size of the original.
  5. Click Apply.

Tip When the frame changes size, the picture stays centred where it was: a picture in the middle of the slide stays in the middle.

Edit Shape

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Changes the outline of the selected shape. You can replace it with another shape from the catalogue — seeing how each one looks at the size your shape actually has — or edit its points one by one.

  1. Click the shape you want to change.
  2. Click Edit Shape: the window opens on Replace Shape.
  3. Pick a shape from the catalogue on the right: the stage shows what you will get, and the shape you started from stays visible underneath.
  4. To work on the outline instead, click Edit Points at the top of the window: drag a point to move it, drag its handles to bend the curves, and use the list on the right to add or remove points.
  5. Click Apply.

Tip Replacing a shape keeps its size, fill and outline — only the silhouette changes. Editing points is different: the shape stops being a preset shape and keeps the outline you drew.

Edit Text

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Writes or corrects the text inside the selected shape. You type in a comfortable box and see the result on the shape itself, at the proportions it really has.

  1. Click the shape you want to write in.
  2. Click Edit Text.
  3. Type in the box on the right: the preview on the left shows the text on the shape itself, as it will look.
  4. Press Enter for a new paragraph. If a line appears under the preview, the text does not fit in the shape.
  5. Click Apply, or press Ctrl+Enter.

Tip Paragraphs you do not change keep their formatting: correcting one word does not make the whole shape bold. Apply stays off until you have typed something.

Merge Shapes

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Builds one new shape out of two or more on the slide: joining them, keeping only what they share, cutting one out of another, or splitting them along their overlaps. A window shows the result before you commit to it.

  1. Click a shape on the slide.
  2. Click Merge Shapes.
  3. Tick the other shapes you want to combine with it — anything you had already selected on the slide arrives ticked.
  4. Choose an operation and watch the preview on the map of the slide.
  5. Click Combine.

Tip The first shape you selected is the primary one: it is what Subtract removes the others from, and the result keeps its fill and outline. To change it, select the other shape first and reopen the window. The arrow next to the button opens the five operations: each one opens the same window with that operation already chosen.

WordArt Styles

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Dresses the text inside the shape: the fill and the outline of the letters, plus the shadow, the reflection and the glow around them. The five are independent, so a text can carry a fill and a glow at the same time.

  1. Click the shape whose text you want to dress. The command stays greyed out until the shape contains text.
  2. Click WordArt Styles: a window opens showing your own text, at the size it has on the slide and over the shape's own fill.
  3. Pick a tile: each row is one look — fill, fill and shadow, outline, reflection, glow — and each column is one accent of the presentation's theme, so the text follows the theme if you change it.
  4. Use the controls underneath to move a step away from the tile: the tint of the text fill and of its outline, the outline weight, the square that shows which way the shadow falls, how much of the reflection stays visible, and the tint and radius of the glow.
  5. Click Apply to write the whole style as a single change, or Remove style to take the decoration off.

Tip A WordArt style dresses the whole text of the shape, not a selected word. Watch the preview before you apply: a light fill on a light shape is text that disappears, and the window is the only place that shows it before you press.

Text Fill

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Sets the colour of the text inside a shape, and how transparent it is. It is a different axis from the shape's own fill: the text is what falls on top of it.

  1. Click the shape whose text you want to colour.
  2. Click Text Fill: a window opens showing your text on your shape, at its real proportions.
  3. Pick a colour from the palette, or click More Colours to choose any colour at all.
  4. Drag the Transparency slider to let the shape show through the letters.
  5. If the window remarks that the text barely stands out, pick a colour further from the shape's fill.
  6. Click Apply. To leave the letters unpainted — an outline-only look — click No Fill instead.

Tip The command is available only when the shape already has text: without letters there is nothing to colour. Type into the shape first, then colour it. A colour picked from the palette is fixed: it no longer follows the deck's theme. Change only the transparency and the link to the theme is kept.

Text Outline

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Draws a line around the letters of the text inside a shape — its colour, its weight and its dash pattern. It is a different axis from the shape’s own outline: this one runs along the glyphs.

  1. Click the shape whose text you want to outline. The command stays greyed out until the shape contains text.
  2. Click Text Outline: a window opens showing the outline on the shape’s own text, in its own font and size, over the shape’s own fill.
  3. Choose the colour, the weight and the dash pattern: the three combine, so you set all of them in one go.
  4. Watch the note under the preview — it appears when the weight starts to close up the counters of the smallest text in the shape.
  5. Click Apply to write all three as a single change, or No Outline to remove the outline.

Tip The stroke is centred on the edge of each letter, so half of it grows inwards. On small text a heavy outline closes the holes in e, a and o and turns the word into a blot — which is why the window shows the outline on your own text instead of just naming a weight. A custom dash on the text appears as a choice of its own, Custom: it stays until you pick another dash, Solid included.

Text Effects

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Adds a shadow, a reflection or a glow to the text inside a shape. The three are independent: text can carry a shadow and a glow at the same time, and switching one off leaves the others alone.

  1. Click the shape whose text you want to decorate. The command stays greyed out until the shape contains text.
  2. Click Text Effects: a window opens showing the shape's own text, inside the shape, at the size it has on the slide.
  3. For the shadow, click the square that shows the direction you want it to fall in; the centre square means no shadow. Then set how transparent, how blurred and how far it is.
  4. For the reflection, choose how much of the mirrored copy stays visible, then set its transparency, blur and distance. For the glow, pick a tint and a radius.
  5. Click Apply to write all three as a single change, or Remove all effects to clear them. Text fill and text outline are left exactly as they are — they have their own commands.
  6. Watch the line under the preview: it appears when an effect grows past the size of the smallest text in the shape.

Tip Effects are measured in points against the size of the letters, not against the shape: the same 3 pt shadow is a soft edge under a 60 pt heading and a second copy of the word under 9 pt text. That is why the note reads the smallest text in the shape, which a single preview cannot show.

Alt Text

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Describes the shape for people who cannot see it — screen readers read this description aloud in place of the shape.

  1. Click the shape you want to describe.
  2. Click Alt Text.
  3. Type a description in the large box: the object is shown next to it, and a line underneath points out anything worth fixing.
  4. Write what the shape conveys, not what it looks like.
  5. For a shape that carries no meaning — a divider, a frame, a flourish — tick Mark as decorative instead: screen readers skip it and no description is needed.
  6. Confirm.

Tip Describe what the shape means here, not what it looks like: an arrow between two boxes is not “an arrow”, it is “leads to”. A shape whose only job is to hold text needs no description of its own — the text is already read out.

Bring Forward

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Moves the shape up through the stack of overlapping objects, one step at a time or all the way to the front.

  1. Click the shape you want to move up.
  2. Click Bring Forward.
  3. Click the arrow next to Bring Forward to open its list, then choose the entry that sends it all the way to the front.
  4. Check what is now covered by the shape.

Tip When several objects overlap, moving one forward always moves it *relative to the others*: the result depends on where they were, not only on where this one was. To see the whole stack at once, choose Reorder Objects from the arrow: it lists every object from front to back and shows which one covers which.

Send Backward

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Moves the shape down through the stack of overlapping objects, one step at a time or all the way to the back.

  1. Click the shape you want to move down.
  2. Click Send Backward.
  3. Click the arrow next to Send Backward to open its list, then choose the entry that sends it all the way to the back.
  4. Check the shape is still findable — an object sent behind an opaque one can no longer be clicked.

Tip A shape sent to the back of an opaque object is still there: use the selection order, not the pointer, to get it back. To see the whole stack at once, choose Reorder Objects from the arrow: it lists every object from front to back and shows which one covers which.

Selection pane

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Opens a side pane listing every object on the current slide — placeholders, pictures, shapes, tables, charts, media and pen strokes. Click a row to select that object, or use the eye to hide it. It is the only way to reach an object buried under another one, or one you have already hidden.

  1. Click Selection Pane.
  2. Click a row in the pane to select that object on the slide.
  3. Click the eye at the end of a row to hide or show that object.
  4. Use Show All or Hide All to work on the whole slide at once.
  5. Click a row again, or close the pane, when you are done.

Tip The list follows the slide you are on, and reads top to bottom as the stack you are looking at: the last row is the object in front. Hiding an object takes it off the slide show and the printout as well, and the pane is the only way to bring it back — every step can be undone.

Align

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Lines the selected shapes up along an edge or through their centres — either with one another or with the slide. Choosing which of the two is half the command, and the window shows you which one you are aiming at before anything moves.

  1. Select the shapes you want to line up. One shape is enough: it will be lined up with the slide.
  2. Click Align. The window opens and nothing has moved yet.
  3. Under “Relative to”, pick Selected objects (the box that encloses them) or Slide (the whole slide). With a single shape only Slide is offered, because a shape cannot be lined up with itself.
  4. Pick a Horizontal alignment, a Vertical one, or both — each axis can be left Unchanged, which is how you line shapes up sideways without moving them up or down.
  5. Watch the preview: the dashed rectangle is the frame, and every selected shape is drawn twice — pale where it is now, solid where it will land. Lining several shapes up on one edge stacks them against it, and the preview shows that before you commit.
  6. Click Align. Both axes and every shape are applied together, so one undo puts everything back.

Tip The arrow next to Align opens the six quick alignments: pick one to align on one axis at a time. Use the button itself when you want to name the frame, move on both axes at once, or simply see where the shapes will end up first.

Group

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Ties a shape together with the other objects on its slide, so they move, rotate and are deleted as one. The window is where you say which objects belong together, and the frame drawn on the map shows the shape the group will have before you make it. The same list holds the pictures on that slide, so a shape and a picture can end up in one group.

  1. Click the shape you want to group — one is enough, because the set is composed in the window. If you had already selected several shapes on the stage, they arrive ticked.
  2. Click Group. The window opens on the objects of that slide; the shape you started from is already in the group and has no check box.
  3. Tick every object that belongs with it — in the list or straight on the map. The frame grows to show what the group will cover.
  4. Read the sentence above the buttons: it says how many objects the group will hold.
  5. Click Group. From then on, moving, rotating or deleting one member moves, rotates or deletes them all, with a single undo.
  6. The arrow next to Group leads to Ungroup, which takes the group apart again.

Tip It is the same group you compose starting from a picture: whichever object you start from, the window lists every object on that slide. To change an existing group — to drop a member, or to take in a stranger — open the window again: its current members start ticked, so both happen in a single step. The command is grey when the slide holds nothing else to group with: a group of one object is that object.

Rotate

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Opens a window where you turn the shape by dragging a dial and read the angle in degrees as you go — any angle, not only quarter turns — and where you can flip it to its mirror image. The arrow next to the button keeps the four quick ways.

  1. Click the shape you want to turn.
  2. Click Rotate.
  3. Drag the dial to the angle you want, or use − and + to step one degree at a time.
  4. Use the quarter-turn buttons for an exact 90° or 180°, and Flip to mirror the shape.
  5. Click Rotate to apply, or Straighten to bring it back upright.
  6. Check the shape still sits inside the slide once it has turned.

Tip Flipping an arrow is not the same as rotating it twice: a flip mirrors the shape, and any text inside it stays the right way round.

Crop Shape

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Trims the selected shape down to a rectangle you draw over it. Whatever falls outside the rectangle is removed, and the shape's frame shrinks to the rectangle — so what is left keeps the same size on the slide.

  1. Click the shape you want to crop.
  2. Click Crop.
  3. Drag a corner or edge handle to set the rectangle, or drag inside it to move it.
  4. If you like, pick a proportion on the right to keep the rectangle square, 4:3, 16:9 and so on.
  5. Click Crop to apply, or Whole shape to start over.

Tip Cropping a shape is not the same as cropping a picture: a picture only hides the part you cut away, a shape loses it. The window shows the shape whole, with the part you are removing under a veil, because that is the only chance to change your mind — afterwards only Ctrl+Z brings it back.

Height

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Sets how tall the shape is, by a typed measurement rather than by dragging. The Shape Size window draws the shape at the measurement you are choosing, so you can see what it does to its outline.

  1. Click the shape you want to resize.
  2. Click Height: the Shape Size window opens with the cursor in the Height box.
  3. Type the measurement you want and press Tab: the preview redraws at the new frame, and the outline of the shape changes with it.
  4. Turn on Lock aspect ratio if you want the other side to follow. On a shape it starts off, because stretching a shape is the ordinary thing to do.
  5. Click Apply.

Tip Watch the preview: the outline of a preset shape depends on its frame, so a star in a very wide frame stops looking like a star.

Width

Where to find it
  • Object › Illustrations › Shape
  • Pane › Shape

Sets how wide the shape is, by a typed measurement rather than by dragging. The Shape Size window draws the shape at the measurement you are choosing, so you can see what it does to its outline.

  1. Click the shape you want to resize.
  2. Click Width: the Shape Size window opens with the cursor in the Width box.
  3. Type the measurement you want and press Tab: the preview redraws at the new frame, and the outline of the shape changes with it.
  4. Turn on Lock aspect ratio if you want the other side to follow. On a shape it starts off, because stretching a shape is the ordinary thing to do.
  5. Click Apply.

Tip When the frame changes size, the shape stays centred where it was: a shape in the middle of the slide stays in the middle.

Edit Icon

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Puts a different icon in place of the one you selected, keeping the frame it occupies. The window shows the icon that is there now next to the one you are choosing, and draws both in the proportions of the frame they occupy on the slide — so what you see in the window is what you get on the page. Icons are grouped by category, the same categories as the Insert gallery they come from.

  1. Click the icon on the slide you want to change.
  2. Click Edit Icon.
  3. Type part of an icon's name in the search box at the top of the catalogue to narrow it down, or scroll the catalogue on the right. Hovering a tile shows its name.
  4. Click the icon you want: it appears beside the current one, in the frame it will occupy.
  5. Click Apply.

Tip The frame does not move: the new icon takes exactly the space the old one had, so nothing around it shifts. To change how big it is, use Height and Width.

Edit Text

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Writes the label that goes beside the icon — the word the icon stands for — and chooses on which of its four sides it sits. The window draws the icon with the label as it will look on the slide, at the real proportions and on your slide's background, so you can see straight away whether the word is too long for the picture or breaks in an awkward place. The label belongs to the drawing: it moves with the icon, it prints with it, and it travels with the file — anyone opening the presentation in PowerPoint sees the icon and its word as one object.

  1. Click the icon on the slide.
  2. Click Edit Text.
  3. Type the label. The preview redraws as you type.
  4. Choose where it sits: below, above, left or right.
  5. Click Apply.

Tip The icon keeps its size and its place: the drawing grows to make room for the label, so the picture you had sized and positioned does not move. Clear the text and apply to remove the label — the drawing goes back exactly to the icon it was. The label is not the alternative text: that one is read aloud to people who cannot see the icon, and you write it with Alt Text.

Combine Icons

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Turns this icon and one or more icons from the catalogue into a single icon. You arrange them inside the frame the icon already occupies on the slide - drag one to move it, drag its corners to resize it — and choose how they combine: Union keeps everything they cover, Combine turns the overlaps into holes, Intersect keeps only what all of them cover, and Subtract removes the others from the one you started from. The window draws the result while you compose it, so you never have to apply it to find out what it looks like. The icons you add come from the catalogue, not from the slide: two icons sitting on a slide are not operands, and how much they overlap is something you choose here rather than something the slide already decided.

  1. Click the icon on the slide you want to combine.
  2. Click Combine Icons.
  3. Scroll the catalogue on the right and click an icon to add it: it lands on the stage, smaller and centred, over the one you started from.
  4. Drag it to move it, or drag a corner handle to resize it, until the two overlap the way you want.
  5. Pick one of the four operations below the stage and watch the preview change.
  6. Click Combine.

Tip The frame does not move: the combined icon takes exactly the space the old one had on the slide, rotation and flips included. If the preview goes empty, the icons do not overlap enough for the operation you picked — the line above the buttons says so, and Combine stays off until there is something to produce. You can combine up to six icons at a time, and a single undo brings back the icon you started from. This is not Merge Shapes: that one combines the shapes you selected on the slide, while here the operands are the ones you arrange in the window.

Quick Styles

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Recolours the icon: the fill of its strokes and the outline around them, chosen together from a gallery that draws every tile on your own icon. Thirty-six tiles - six families down, six accents across - and the accents are the ones of your deck's theme, so a tile shows the colour the slide will really use rather than a stock blue. The two families at the top have no fill at all, which does not merely change the colour of the pictogram: it turns it into line art. Below the gallery the same two axes are there on their own, so you can step away from a tile by one notch and watch the icon while you do it.

  1. Click the icon on the slide.
  2. Click Quick Styles.
  3. Look at the preview on the left: it is your icon, at the size it currently has, on the background of the slide it sits on.
  4. Click a tile to apply it. The row picks the look, the column picks the theme accent.
  5. To step away from the tile, pick another fill or outline colour, or drag the Weight slider.
  6. Click Apply.

Tip The preview sits on the slide's own background, and on a dark deck that is the whole point: an icon is ink with nothing of its own behind it, and half the tiles lighten it. The outline scales with the icon: it is kept as a share of the icon's own size, so the same icon looks the same at any size, and enlarging it does not leave a hairline behind. Reset puts the icon back to the look it had before it was first recoloured - black without an outline for an icon from the catalogue, its own colour for one that came from another file, even after the file has been saved and reopened - and not to nothing: if you take away both the fill and the outline yourself, a line under the preview warns you the icon will not be visible. Quick Styles stays greyed out on a drawing this window cannot rewrite in full, such as one that already carries several colours.

Icon Fill

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Sets the colour of the inside of the icon — the pictogram itself, not a frame around it. The window shows the icon at the size it has on the slide and, above all, on the colour it actually sits on: the slide background, not white paper. That is the difference that matters most, because a colour for a pictogram has no quality of its own — it only has one against what is behind it — and on a dark deck the verdict flips: there a light pictogram is the readable choice and a black one disappears. The palette is the same one the Quick Styles gallery offers and carries the accents of the presentation theme, so a colour you can reach from one you can reach from the other; the first cell means no fill at all — a hollow icon, which is still a drawing as long as an outline traces it. The outline is left exactly as it is: it has its own command.

  1. Click the icon on the slide.
  2. Click Icon Fill.
  3. Pick a colour, or the first cell to leave the icon hollow.
  4. The arrow keys move the choice one cell at a time, and up or down a whole row.
  5. Read the line under the preview: it tells you whether the colour you picked will actually show on this slide.
  6. Click Apply.

Tip The line under the preview is a measurement, not an opinion: it compares your colour with the slide background the icon sits on and reports the contrast ratio. Below 3:1 an icon is hard to make out — that is the minimum the accessibility standard asks for a graphic (WCAG 2.1, Non-text Contrast). It is a note and never a block: you can apply whatever you like. Because the yardstick is the background, the same colour may be flagged on one slide and not on the next: changing the background changes the verdict, not the icon. A second reading appears when the fill gets too close to the outline the icon carries, because at that point the outline stops being visible. And if you take the fill away from an icon that has no outline, nothing is left to draw at all — the window says so. Icon Fill stays greyed out on a drawing the window cannot rewrite in full, one that already carries several colours for instance.

Icon Outline

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Sets the colour and the thickness of the line that runs around the icon's shapes. The window shows the icon itself, at the size it has on the slide and on the background it sits on, because an outline is only ever as good as what is behind it: a white line on a white deck is a line nobody sees. The palette carries your deck's theme accents, the same ones the Quick Styles gallery offers, so a colour you can reach from one you can reach from the other, and the first cell means no outline at all. The fill is left exactly as it is — it has its own place in the gallery — but you can see it, because it is half of what you are judging.

  1. Click the icon on the slide.
  2. Click Icon Outline.
  3. Pick a colour, or the first cell if you want no outline at all.
  4. Drag the Weight slider; the arrow keys nudge it one step at a time.
  5. Watch the mark on the slider: past it, this icon's strokes start to touch.
  6. Click Apply.

Tip The small mark on the weight slider is measured on your icon, not guessed: it is the width at which this particular drawing closes up — where a hole fills in, or two separate parts weld into one. A solid, compact drawing never closes, and then there is no mark at all. You can go past it: the slider does not stop, a line under the preview simply tells you, with the number. The preview sits on the slide's own background, and on a dark deck that is the whole point — an icon is ink with nothing of its own behind it, so a pale outline that looks crisp on white can vanish on the slide it is going to. The outline scales with the icon, so the same icon looks the same at any size and enlarging it does not leave a hairline. Icon Outline stays greyed out on a drawing the window cannot rewrite in full — one that already carries several colours, for instance.

Icon Effects

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Puts a shadow, a glow or a reflection on the icon. All three fall on the pictogram itself, not on the rectangle of empty space around it: a shadow follows the drawing's own outline, and a glow surrounds its strokes. The three are independent, so an icon can carry a shadow and a glow at the same time, and switching one off leaves the others alone. The window draws your own icon, at the size it has on the slide and on the colour the slide puts behind it, so what you see is what the slide show and the printed handout will show.

  1. Click the icon on your slide.
  2. Click Icon Effects.
  3. For the shadow, click the square that shows the direction you want it to fall in; the centre square means no shadow. Then set how transparent, how blurred and how far away it is.
  4. For the glow, pick a tint, then set its size and how transparent it is. The first swatch, the one crossed through, removes the glow.
  5. For the reflection, choose Reflected, then set how transparent, how blurred and how far below the icon it sits.
  6. Watch the preview on the left while you drag: it is your icon with the real effects on it, on the real background of the slide.
  7. Click Apply to write all three as a single change, or Remove all effects to clear them.

Tip Effects are measured in points, and an icon is mostly empty space: what you are really covering is the thickness of its strokes, which on a normal icon is only a few points. That is why the sliders start smaller here than for a photograph, and why a line under the preview warns you when a glow is wide enough to close the gaps in the drawing, or a shadow far enough to read as a second copy of it. The warning never stops you - it is a note, not a rule. Two things are worth knowing on a deck. A dark shadow and a pale glow read the opposite way on a dark background, and the window judges them against the colour of your slide, not against white paper. And Icon Effects works where the other icon style commands stop: it never touches the drawing itself, so a multi-coloured logo that Quick Styles refuses can still take a shadow here. Removing the effects puts the icon back exactly as it was, and the same icon file stays in the presentation.

Reset Icon

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Puts the icon back the way it was. The window shows the icon twice, side by side and at the same scale — as it is now, and as it would be after restoring — with one line for each thing that has actually changed: its size, the way it has been turned, the colour of the pictogram itself, and any border or frame it carries. Every line starts ticked, so restoring everything is a single click; untick the ones you want to keep. The size it goes back to is the icon's own natural size, the one it had when it was first placed on the slide: it is not remembered but worked out from the icon itself, so it is right even after you have swapped the icon or combined it with another. The colour goes back to the one the icon had before it was recoloured — a recoloured icon carries its original with it, even after saving and reopening, so an icon from the catalogue goes back to black and one that arrived blue from another file goes back to blue — and that is the same place the Reset button inside Quick Styles takes it, so the two can never disagree. An icon that was never recoloured here, or one drawn in several colours, has no colour to go back to, and that line is simply not there.

  1. Click the icon on the slide.
  2. Click Reset Icon.
  3. Compare the two previews: Now on the left, After restoring on the right, both at the same scale, so a smaller icon really does look smaller.
  4. Untick any line you want to keep — Size, for example, if you resized the icon on purpose.
  5. Check the preview on the right: if you had recoloured the icon, the pictogram is shown back in black.
  6. Click Restore.

Tip The command stays greyed out while the icon has nothing to restore, so a greyed Reset Icon means the icon is already the way it came in. Nothing you have written is touched: the icon's label and its alt text are content, not formatting, and Reset Icon never removes them. The icon does not move either — it keeps its place on the slide, only its size changes. A single undo brings everything back at once, however many lines you ticked — including the colour, which lives in the icon's own drawing rather than in the presentation. On an icon that carries a label the Size line is not offered: the frame there holds the pictogram and the word together, and there is no single size to go back to; the other lines still work.

WordArt Styles

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Chooses how the letters of the icon's **label** look — the word beside it on the slide, not the pictogram. The pictogram has its own commands (Quick Styles, Icon Fill, Icon Outline); this one dresses the word. The dialog shows thirty ready-made styles — five families across six colours — and below them the five axes for stepping away from one: text fill, outline and its weight, shadow direction, reflection extent, glow tint and radius. The preview is not a lookalike drawing: it is the real icon with its real label, in the position it has on the slide and on the slide's own background, drawn by the same engine that draws them on the slide. Applying writes the style as a single history entry, so one Ctrl+Z removes all of it. The drawing does not change size, because a style does not move where the letters wrap.

  1. Click the icon on the slide.
  2. If the icon has no label yet, write one first with Edit Text. Without a label the WordArt Styles command stays greyed out, because there are no letters to dress.
  3. Click WordArt Styles.
  4. Pick one of the thirty styles: each row is a look, each column a colour.
  5. Adjust the axes below the gallery to step away from the style you picked.
  6. Watch the preview on the left: it shows the label as it will sit beside the icon.
  7. Click Apply. Remove style clears the decorations — outline, shadow, reflection and glow — and leaves the letters their colour.

Tip The preview background is the slide's own background, and that matters more here than on a page: half of the ready-made styles have a light fill, which on a light slide is nearly invisible text — and on a dark deck the verdict turns over, so the styles that vanish on one slide are the readable ones on the next. The six colours are the deck's own theme accents, so a style follows a theme change the way the rest of the slide does. Changing the label text later with Edit Text does not remove the style — fixing a typo does not strip the word. Removing the label entirely does remove the style, because nothing is left to dress.

Text Fill

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Chooses the colour of the letters of the icon's **label**: the word beside it on the slide, not the pictogram. The pictogram has its own command (Icon Fill); here you colour the word. The window offers fifteen colours, a More Colours row for any other one, and — set apart — the Automatic row. The preview is not a lookalike drawing: it is the real icon with its label, in the position it has on the slide and over the slide's own background. Under the preview, when the chosen colour does not stand out enough, you get the contrast ratio with the minimum beside it: 2.1 is a number, 2.1 against 4.5 is a judgement. It never stops you choosing — it tells you. On Apply the colour lands in a single undo step, and the pictogram does not change.

  1. Click the icon on the slide.
  2. If the icon has no label yet, write one first with Edit Text. Without a label the command stays greyed out, because there is no text to colour.
  3. Click Text Fill.
  4. Pick one of the fifteen colours, or More Colours to mix your own.
  5. Watch the preview and the line under it: it tells you whether that colour will read on that slide.
  6. Click Apply. The Automatic row puts the label back to the colour the theme decides.

Tip Automatic is not black: it is the colour your deck's theme gives to text, so on a dark slide it means white. That is the difference between pinning a colour and letting the theme decide — they look the same until you change theme, and then the pinned label stays as it was while the automatic one follows the rest of the slide. The swatch on the Automatic row always shows the colour you would actually get. The judgement is made against the slide's background, so the same colour can be flagged on one slide and cleared on the next. The threshold is stricter than the one in Icon Fill because the two windows judge different things: a pictogram is a drawing, a label is small text, and small text needs more contrast. This command changes the colour only: an outline, shadow, reflection or glow put there with WordArt Styles stay where they are, and Clear Style in that window is what removes them.

Text Outline

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Draws an outline around the letters of the icon's label — the word beside it, the one you write with Edit Text — and sets its colour, width and dash. It does not outline the pictogram's own strokes: those have Icon Outline. It is the same window you use to outline the text of a shape, opened on the label: the three settings combine, so choosing a dash does not mean giving up the colour. The preview shows two things at once, at two distances: on top the word enlarged, where you can see how the stroke runs along the letters; below, the icon with its label at the size it will really have on the slide, on the background it will really fall on.

  1. Click the icon on the slide.
  2. Click Text Outline.
  3. Pick a colour, or More Colours… to mix one.
  4. Pick a width from the row, or drag the slider for a value in between.
  5. Pick a dash, if you want one.
  6. Look at both preview panes and read the line underneath.
  7. Click Apply; No Outline removes the outline.

Tip The stroke is centred on the letter shapes, so half of it grows inwards: past a certain width the counters — the holes in a, e, o, g — close up and the word turns into a blob. The line under the preview says so when it happens; it is a note, never a veto. A label is always 11 point, so a few tenths of a point are enough — on a large title the same width would look like a hairline. That is exactly what the lower pane is for: it shows the word at its real size, which the enlarged one cannot. An outline is judged against two things — the slide's background and the colour the theme gives the letters, which on a dark deck is white — so the same stroke can read on one slide and vanish on the next without anyone touching it. The command stays greyed out on an icon with no label: write the label first, with Edit Text. And do not confuse it with Icon Outline, which draws the border of the pictogram. It changes the outline only: a fill, shadow, reflection or glow put there with WordArt Styles stay where they are.

Text Effects

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Sets a shadow, a reflection and a glow on the letters of the icon's label — the word beside it, the one written with Edit Text. It does not decorate the strokes of the pictogram: those have Icon Effects. It is the same window used to decorate the letters of a shape, opened on the label: the three effects combine, so switching on a glow does not switch off the shadow. The preview shows two things at once, for two different questions: above, the word magnified, where you see what the effect looks like; below, the icon with its own label at its true size and on the slide background, where you see where the effect lands.

  1. Click the icon on the slide.
  2. Click Text Effects.
  3. For the shadow, pick a direction in the grid; the middle cell removes it.
  4. For the reflection, pick how far it extends; None removes it.
  5. For the glow, pick a colour; the first swatch removes it.
  6. Adjust transparency, blur, distance and radius with the sliders.
  7. Look at both preview panes and read the line below them.
  8. Click Apply; Remove All Effects clears all three.

Tip An effect reaches outside the word, and an icon's label has a neighbour: the pictogram, a sixteenth of an inch away. A slightly wide glow reaches it with the very first swatch, and a reflection touches it when the label sits above the icon. That is not a mistake — sometimes it is exactly the effect you want — but you cannot see it in the magnified word, which shows only the word: the lower pane is what tells you, and that is why it shrinks as the glow grows, so it can show it whole. A shadow and a glow are, literally, the contrast with what sits behind and inside the letters: here the background is the slide and the colour of the glyphs is the one the theme gives the label, which on a dark deck is white — so the same halo can show on one slide and vanish on the next without anyone touching it, and the colours offered are the deck theme's accents. A label is always 11 points, so a shadow offset by a few points already reads as a second copy of the word; the line below the preview says so when it happens, and it is a note and never a ban. Text Effects leaves the colour and the outline of the letters alone: those have their own commands. It stays greyed out on an icon without a label: write the label first with Edit Text. And do not confuse it with Icon Effects, which decorates the pictogram, measuring itself against its ink rather than against the font size.

Alt text

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Writes the sentence that reaches anyone who cannot see the icon: a screen reader reads it in place of the symbol. An icon almost always stands in for a word, so what goes here is what it means, not what it looks like.

  1. Click the icon on the slide you want to describe.
  2. Click Alt text.
  3. Type one or two sentences saying what the icon tells the reader.
  4. Click OK.

Tip Describe the meaning, not the drawing: a padlock beside a price is “secure payment”, not “a padlock”.

Bring forward

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Moves the icon one step up the stack of overlapping objects, or straight to the top. The arrow beside the button opens the list with both, plus the window that shows the whole stack at once.

  1. Click the icon on the slide you want to move up.
  2. Click the arrow beside Bring forward.
  3. Choose Bring forward for one step, or Bring to front to put it above everything.
  4. Choose Reorder objects… to see the whole stack and drag the icon into place.

Tip When the icon is already on top there is nothing to raise it above, and the two entries that would do it are switched off rather than doing nothing.

Send backward

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Moves the icon one step down the stack of overlapping objects, or all the way to the back. The arrow beside the button opens the list with both, plus the window that shows the whole stack at once.

  1. Click the icon on the slide you want to move down.
  2. Click the arrow beside Send backward.
  3. Choose Send backward for one step, or Send to back to put it under everything.
  4. Choose Reorder objects… to see the whole stack and drag the icon into place.

Tip Sending an icon behind a filled shape hides it completely: reach it again from the Selection pane, which lists what the pointer can no longer find.

Selection pane

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Opens the side panel that lists every object on the slide, so you can reach one the pointer cannot — an icon buried behind a picture, or one that has been sent to the back.

  1. Click Selection pane.
  2. Click a name in the list to select that object.
  3. Double-click a name to rename it.
  4. Click the eye beside a name to hide that object without deleting it.

Tip Renaming is what makes the list usable: “Icon 7” tells you nothing next month, “download icon” does.

Align

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Lines the icon up against a reference — a margin, the slide, or the other objects you have selected — instead of nudging it by eye.

  1. Click the icon on the slide you want to line up.
  2. Click Align.
  3. Choose what to align to, then the edge or the centre you want.
  4. Click Align.

Tip Aligning a row of icons to their centres makes them read as one band, which nudging never quite achieves.

Group

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Ties the icon to the other objects you choose, so they move, align and are deleted as one. A group is a relationship and not a container: each icon keeps its own settings.

  1. Click the icon on the slide you want to put in a group.
  2. Click Group.
  3. Tick the objects that go in — the map shows the frame the group will have, growing as you tick.
  4. Click Group.

Tip Taking a group apart remembers it: Regroup brings back the last one you undid, so you can try a layout without losing it.

Rotate

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Opens a window where you turn the icon by dragging a dial and read the angle in degrees as you go — any angle, not only quarter turns — and where you can flip it to its mirror image.

  1. Click the icon on the slide you want to turn.
  2. Click Rotate.
  3. Drag the dial to the angle you want, or use − and + to step one degree at a time.
  4. Use the quarter-turn buttons for an exact 90° or 180°, and Flip to mirror the icon.
  5. Click Rotate to apply, or Straighten to bring it back upright.

Tip Flipping an arrow icon is not the same as rotating it twice: a flip mirrors the symbol, so a left arrow becomes a right one.

Crop

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Keeps only the part of the icon inside a rectangle you choose. Crop opens a window showing the whole icon, with the part you are cutting away dimmed rather than hidden — so putting a piece back is as easy as taking it off. The icon is never squashed: the frame follows the crop, so what stays keeps the size it had on the slide, in the place it had. Nothing is thrown away — Remove crop, in the same window, brings the whole icon back.

  1. Click the icon on the slide.
  2. Click Crop.
  3. Drag inside the crop window to move it, or drag a corner or edge handle to resize it.
  4. To cut to a set shape, pick one under Proportions — Square, 4:3, 16:9 and the others apply straight away.
  5. Click Crop to apply. Remove crop puts the whole icon back, frame and all.

Tip Cropping does not redraw the icon: it chooses which part of it you are looking at, and you can change your mind at any time. That is what makes it different from Combine icons, which really does cut the drawing. And whatever you keep stays sharp at any size, because an icon is redrawn from its outline rather than enlarged — which is also why the window shows only the icon's name where a photograph would show a pixel count. An icon has no pixels to count.

Height

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Opens the size window with the keyboard already on the height box. An icon is drawn from its outline, so it stays sharp at whatever size you give it — there is no resolution to lose.

  1. Click the icon on the slide you want to resize.
  2. Click Height.
  3. Type the height you want.
  4. Leave the aspect-ratio lock on to keep the symbol's proportions, or turn it off to stretch it.
  5. Click OK.

Tip Unlike a photograph, an icon never goes soft when you enlarge it: it is redrawn at the new size, not scaled up.

Width

Where to find it
  • Object › Illustrations › Icon
  • Pane › Icon

Opens the size window with the keyboard already on the width box — the same window that Height opens, because a width chosen without knowing whether the proportions are locked is not yet a choice.

  1. Click the icon on the slide you want to resize.
  2. Click Width.
  3. Type the width you want.
  4. Leave the aspect-ratio lock on to keep the symbol's proportions, or turn it off to stretch it.
  5. Click OK.

Tip Turning the lock off squashes the symbol: a stretched icon reads as a mistake far sooner than a stretched photograph does.

3D Model Views

Where to find it
  • Object › Illustrations › 3D Model
  • Pane › 3D Model

Chooses the direction the model is seen from, out of the fourteen notable ones.

  1. Select the model on the slide.
  2. Click 3D Model Views.
  3. Fourteen tiles open — six faces on the first row, eight corners below.
  4. Every tile draws your own model seen from that direction, and the current one is highlighted.
  5. Click a tile: the slide redraws from that angle in a single undo step.

Tip No tile is highlighted when the model carries a free camera set elsewhere: it is not any of the fourteen, and saying otherwise would be a lie.

Reset 3D Model

Where to find it
  • Object › Illustrations › 3D Model
  • Pane › 3D Model

Brings the model back to the view it came in with.

  1. Select the model on the slide.
  2. Click Reset 3D Model.
  3. The model is seen again from the default corner view.

Tip Only the view goes back, not the size: the model keeps the frame you gave it on the slide.

Alt Text

Where to find it
  • Object › Illustrations › 3D Model
  • Pane › 3D Model

Writes the description that reaches whoever cannot see the model.

  1. Select the model on the slide.
  2. Click Alt Text.
  3. Write one or two sentences describing what the model shows.
  4. Click OK.

Tip The window shows no preview for a model: it has neither the bytes of a picture nor the outline of a shape, so there is nothing it could honestly draw.

Text Pane

Where to find it
  • Object › Illustrations › SmartArt
  • Pane › SmartArt

Opens the pane where the diagram's entries are written. Each line is one shape in the graphic and its indent is its level, so the whole diagram is edited as an outline instead of shape by shape.

  1. Click the diagram.
  2. Click Text Pane.
  3. Type one entry per line; press Enter for a new line and Tab to make it a sub-entry.
  4. Use Promote and Demote to change a line's level, Move Up and Move Down to reorder.
  5. Pick another layout from the gallery at the top if you want a different kind of diagram.
  6. Click OK — the diagram is redrawn with the new text.

Tip The colours stay as you set them: correcting a word does not undo a Change Colors.

Change Layout

Where to find it
  • Object › Illustrations › SmartArt
  • Pane › SmartArt

Lays the same entries out as a different kind of diagram — a list becomes a process, a process becomes a cycle — without retyping anything. The text and the colours are kept.

  1. Click the diagram you want to lay out differently.
  2. Click Change Layout.
  3. Choose a layout from the list — the diagram is redrawn straight away.
  4. If it is not what you wanted, press Ctrl+Z or pick another one.

Tip The frame keeps the size you gave it: the diagram is laid out again inside it, so it stays exactly where you put it.

Change Colors

Where to find it
  • Object › Illustrations › SmartArt
  • Pane › SmartArt
  • Shortcut menu

Recolours the diagram with the colours of the theme: either the whole run of accents, or a single accent for a quieter, one-colour graphic.

  1. Click the diagram you want to recolour.
  2. Click Change Colors.
  3. Choose Colorful to cycle through all six accents, or a single accent swatch for a one-colour diagram.
  4. The diagram is recoloured straight away.

Tip The swatches show the accents of the theme, so what you see in the list is what the diagram will look like.

Reset Graphic

Where to find it
  • Object › Illustrations › SmartArt
  • Pane › SmartArt

Puts the diagram's colours back to the default of the theme, leaving its text, its structure and its layout untouched.

  1. Click the diagram you want to reset.
  2. Click Reset Graphic.
  3. The diagram goes back to the default colours.

Tip Only the colours are reset. What you typed and the layout you chose stay as they are — press Ctrl+Z if you want to undo more than that.

Back to the guide

Productivity, made in Italy.

Bring the whole suite to your team — simple, secure and entirely yours.