Teatrys guide

Format

The step-by-step guide to every command in the Format menu of Teatrys.

Font

Where to find it
  • Format › Text
  • Toolbar
  • Pane › Shape

The Font box sets the typeface of the selected text. Slides are read from a distance, so a plain, open typeface carries furthest. The list shows the fonts the app renders faithfully, each written in its own typeface; Advanced…, at the bottom of the list, opens a window where you can search fonts by name and preview them on the selected text.

  1. Select the text you want to change.
  2. Click the Font box.
  3. Choose the typeface you want from the list.

Tip The change reaches only the text you selected; select the whole placeholder to recast every line inside it at once.

Increase Font Size

Where to find it
  • Format › Text › Size
  • Toolbar
  • Pane › Shape

Increase Font Size takes the selected text up one step. It is the quick way to make a title carry to the back of the room.

  1. Select the text you want to enlarge.
  2. Click Increase Font Size.
  3. Click it again for each further step.

Tip Decrease Font Size, next to it, takes the text back down again.

Decrease Font Size

Where to find it
  • Format › Text › Size
  • Toolbar
  • Pane › Shape

Decrease Font Size takes the selected text down one step. Use it when a line has grown too long for the placeholder holding it.

  1. Select the text you want to reduce.
  2. Click Decrease Font Size.
  3. Click it again for each further step.

Tip If the text still overflows, Autofit can size it to the box for you.

Font Size

Where to find it
  • Format › Text › Size
  • Toolbar
  • Pane › Shape

The Font Size box sets how big the selected text is. On a slide, size is the main signal of what is a heading and what is detail. The list offers sizes from 8 to 96 points; Advanced…, at the bottom of the list, opens a window where you can type any size from 1 to 4000 points and see a preview.

  1. Select the text you want to resize.
  2. Click the Font Size box.
  3. Choose the size you want from the list.

Tip Increase Font Size and Decrease Font Size, beside the box, step through the same sizes without opening the list.

Bold

Where to find it
  • Format › Text
  • Toolbar
  • Pane › Shape
Ctrl+B

Bold thickens the selected text so it carries weight on the slide. It is the usual mark for a stressed word in a line of body text.

  1. Select the text you want to emphasise.
  2. Click Bold.
  3. Click Bold again to take it off.

Tip The button stays lit while the cursor sits in bold text, so it tells you what the selection already carries.

Italic

Where to find it
  • Format › Text
  • Toolbar
  • Pane › Shape
Ctrl+I

Italic slants the selected text. On a slide it marks a title being quoted, a term being introduced, or an aside.

  1. Select the text you want to slant.
  2. Click Italic.
  3. Click Italic again to take it off.

Tip Italic is harder to read from a distance, so keep it to a few words rather than a whole paragraph.

Underline

Where to find it
  • Format › Text
  • Pane › Shape
Ctrl+U

Underline draws a line under the selected text. The arrow next to it offers the other kinds of line.

  1. Select the text you want to underline.
  2. Click Underline.
  3. Click the arrow next to Underline to choose a different kind of line.
  4. Click Underline again to take the line off.

Tip On a slide an underline reads as a link, so use bold when you only mean to stress a word.

Strikethrough

Where to find it
  • Format › Text

Strikethrough draws a line through the selected text, leaving it readable. It marks something as struck out or superseded rather than removing it.

  1. Select the text you want to strike through.
  2. Click Strikethrough.
  3. Click Strikethrough again to take the line off.

Tip Struck-out text still reads from the audience's seats, so delete it once the point has been made.

Character Spacing

Where to find it
  • Format › Text

Character Spacing widens or tightens the space between the letters of the selected text. On a slide it is a fine adjustment: a little more space opens up a short title, and a little less brings a line that just overflows back inside its box.

  1. Select the text you want to space.
  2. Click Character Spacing.
  3. Choose one of the five settings, from Very Tight to Very Loose.
  4. For any other amount, choose More Spacing, pick expanded or condensed and type the value in points.

Tip Normal does not set the spacing to zero: it removes it, so the text goes back to the spacing the typeface itself carries.

Font Color

Where to find it
  • Format › Text
  • Toolbar
  • Pane › Shape

Font Color changes the colour of the letters themselves. The arrow next to it opens the other colours.

  1. Select the text you want to recolour.
  2. Click Font Color to apply the colour shown on the button.
  3. Click the arrow next to Font Color to choose another colour.
  4. For a colour that is not among the swatches, choose More Colors… in the same menu.

Tip The button keeps the colour you last chose, so repeating it on another slide takes a single click.

Text Effects

Where to find it
  • Format › Text

Text Effects treats the letters themselves with a shadow, an outline or a glow. A shadow is what keeps a title legible over a busy picture.

  1. Select the text you want to treat.
  2. Click Text Effects.
  3. Choose the effect you want from the menu.

Tip Shape Effects does the same for the shape rather than for the text inside it.

Clear All Formatting

Where to find it
  • Format › Text

Clear All Formatting takes away the formatting you put on the text yourself — the typeface, the size, bold and italic, the colour, the highlight, the text effects, the character spacing — and lets the text fall back to the look the layout gives it. It opens a window showing the text as it is now and as it would be, so you can see what you are about to lose.

  1. Select the text you want to strip, or click inside the shape to take all of its text.
  2. Click Clear All Formatting.
  3. Compare the two previews: above, the text as it is; below, the text as it would be.
  4. Clear the check box of anything you want to keep.
  5. Click Clear.

Tip Press Ctrl+Spacebar to strip everything at once, without opening the window. The button is greyed out when the text carries no formatting of its own: what you see then comes from the layout, and there is nothing to take away.

WordArt

Where to find it
  • Format › Text

Gives text a decorative look picked from a set of ready-made styles. Keep it for a title or a short line that has to stand out.

  1. Select the text box you want to restyle.
  2. Click WordArt.
  3. Pick the look you want from the submenu that opens.
  4. Click WordArt again to open the same choices and change your mind.

Tip WordArt stays greyed out until an object is selected, because the style dresses the whole text box.

Align Left

Where to find it
  • Format › Paragraph › Alignment
  • Toolbar
  • Pane › Shape
Ctrl+L

Align Left lines the selected paragraphs up against the left edge of their box and leaves the right edge ragged. It is the easiest arrangement to read.

  1. Click in the paragraph, or select across several paragraphs.
  2. Click Align Left.
  3. Check the result against the rest of the slide.

Tip The four alignment buttons show which one is in force for the paragraph the cursor sits in.

Center

Where to find it
  • Format › Paragraph › Alignment
  • Toolbar
  • Pane › Shape
Ctrl+E

Center places the selected paragraphs midway between the left and right edges of their box. It suits a title or a short line standing on its own.

  1. Click in the paragraph, or select across several paragraphs.
  2. Click Center.
  3. Click Align Left to put the text back against the left edge.

Tip Centred text is tiring to read in quantity, so keep it to a line or two.

Align Right

Where to find it
  • Format › Paragraph › Alignment
  • Toolbar
  • Pane › Shape
Ctrl+R

Align Right lines the selected paragraphs up against the right edge of their box. Use it for a caption or an attribution sitting under something else.

  1. Click in the paragraph, or select across several paragraphs.
  2. Click Align Right.
  3. Click Align Left to put the text back.

Tip Alignment is measured inside the shape, so move the shape itself if the text needs to sit elsewhere on the slide.

Justify

Where to find it
  • Format › Paragraph › Alignment
Ctrl+J

Justify spreads the words of each line so that both edges of the text line up. It gives a block of text a squared-off edge.

  1. Click in the paragraph, or select across several paragraphs.
  2. Click Justify.
  3. Click Align Left if the spacing between the words comes out uneven.

Tip Narrow boxes justify badly: the fewer words a line holds, the wider the gaps opened between them.

Bullets

Where to find it
  • Format › Paragraph › Lists

Bullets turn the selected paragraphs into a list, each line marked with its own point. It is the standard shape for the body of a slide.

  1. Select the paragraphs you want to list.
  2. Click Bullets.
  3. In the menu, the other bullets follow the Bullets item.
  4. Click Bullets again to go back to plain paragraphs.

Tip Increase Indent pushes a line down to a sub-point under the one above it.

Numbering

Where to find it
  • Format › Paragraph › Lists

Numbering turns the selected paragraphs into a numbered list. Use it when the order matters, such as steps to follow or points in rank.

  1. Select the paragraphs you want to number.
  2. Click Numbering.
  3. In the menu, the other number styles follow the Numbering item.
  4. Click Numbering again to go back to plain paragraphs.

Tip Switch to Bullets, beside it, when the points stand on their own and the order does not matter.

Decrease Indent

Where to find it
  • Format › Paragraph
Ctrl+Shift+M

Decrease Indent pulls the selected paragraphs back towards the margin, one step at a time. Inside a list it promotes a line to the level above.

  1. Click in the paragraph, or select across several paragraphs.
  2. Click Decrease Indent.
  3. Click it again for each further step.

Tip Increase Indent, beside it, moves the text the other way.

Increase Indent

Where to find it
  • Format › Paragraph
Ctrl+M

Increase Indent pushes the selected paragraphs further from the margin, one step at a time. Inside a list it demotes a line to a sub-point of the one above.

  1. Click in the paragraph, or select across several paragraphs.
  2. Click Increase Indent.
  3. Click it again for each further step.

Tip Indent is what makes the levels of a bulleted list, so build sub-points with this button rather than with spaces.

Line Spacing

Where to find it
  • Format › Paragraph

Line spacing sets how much air there is between the lines of a paragraph, and between one paragraph and the next. Opening a dense slide up is often quicker than cutting words from it.

  1. Click in the paragraph, or select across several paragraphs.
  2. Click Line Spacing.
  3. Choose the spacing you want from the list.
  4. In the menu, Line Spacing opens a submenu with the paragraph spacing choices.

Tip Spacing is a paragraph setting: it applies to every paragraph the selection touches, whole.

Text Direction

Where to find it
  • Format › Paragraph

Text Direction turns the text inside a shape or placeholder so it can run sideways instead of across. Use it for a narrow label down the edge of a slide.

  1. Select the shape or placeholder holding the text.
  2. Click Text Direction.
  3. Choose the direction you want from the list.

Tip Only the text turns; the shape around it keeps the size and the position you gave it.

Align Text

Where to find it
  • Format › Paragraph

Align Text decides where the text sits inside a shape: against the top edge, in the middle, or against the bottom. More Options shows the three choices on the shape itself and adds a second one, which centers the whole block of text across the width of the shape.

  1. Select the shape or placeholder holding the text.
  2. Click Align Text.
  3. Choose Top, Middle or Bottom, or click More Options… to see the three choices on the shape itself.
  4. In the window, tick Center the text block in the shape to move the whole block sideways, then click Apply.

Tip Centering the block is not the same as centering the paragraphs: the lines stay lined up with each other, and it is the group they form that moves to the middle.

Autofit

Where to find it
  • Format › Paragraph
  • Pane › Shape

Autofit decides what happens when there is more text than the box can hold: the text can be shrunk or grown to fit, or left as it is. It keeps a wordy slide from spilling over its placeholder.

  1. Select the shape or placeholder whose text is overflowing.
  2. Click Autofit.
  3. Choose how the text should behave from the list.

Tip Autofit rescues a slide that has outgrown its box, but text shrinking away is a sign the slide is carrying too much.

Columns

Where to find it
  • Format › Paragraph

Columns divides the text inside a shape or placeholder into two or more side-by-side columns. It fits a list of short items into the height of a single slide.

  1. Select the shape or placeholder holding the text.
  2. Click Columns.
  3. Choose how many columns you want from the list.

Tip The columns are cut out of the shape, so widen the shape if the text ends up too narrow to read.

Convert to SmartArt

Where to find it
  • Format › Paragraph

Convert to SmartArt turns the text of a shape or a placeholder into a diagram: every line becomes a box, and an indented line becomes a box under the one above it. The window opens on your own text, so each layout in the gallery is drawn with the words you actually wrote.

  1. Select the shape or the placeholder holding the text.
  2. Click Convert to SmartArt.
  3. Pick a layout from the gallery - every tile is drawn with your text - and a colour from the swatches under the preview.
  4. Click Convert. The diagram takes the place of the text, in the same spot and at the same size.

Tip A blank line between two bullets is spacing, not an item: it does not become an empty box. If the result is not the one you wanted, a single Ctrl+Z brings the text back.

Paragraph settings

Where to find it
  • Format › Paragraph

This opens a dialog gathering the indent, spacing and line-break settings in one place. Come here when you want several of them set together, or a value the buttons do not offer.

  1. Click in the paragraph, or select across several paragraphs.
  2. Click the Paragraph button.
  3. Set the indents, the spacing and the line breaks in the dialog that opens.
  4. Confirm the dialog to apply them to the selected paragraphs.

Tip The paragraph buttons cover the common cases in one click; the dialog is for the rest.

Back to the guide

Productivity, made in Italy.

Bring the whole suite to your team — simple, secure and entirely yours.